[Sat Aug 15 04:01:10 2015] Detection parameters:
  Position = (391.5, 642.4) = 12 0 16.89 55 39 33.8
  Extent = 0.7" x 0.5", rotation angle = 149 degrees
  Source counts = 19.2 +/- 4.5
  Background counts = 0.8
  Rate = 0.0004 +/- 9e-05

[Sat Aug 15 04:01:11 2015] Off-axis axis estimate = 3.87'
[Sat Aug 15 04:16:46 2015] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:16:46 2015] Initial guess for spatial extent in simple fitting = 0.79"
[Sat Aug 15 04:16:46 2015] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.126
[Sat Aug 15 04:16:46 2015] Giving source the simple spatial ID 2 for pass 0, mean size = 0.79"
[Sat Aug 15 04:23:10 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass0_src2.ximg exists
[Sat Aug 15 04:23:10 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Aug 15 04:23:10 2015] Fit fullrun_ccd1_acisf14026_pi14-548_cl_pass0_src2 appears to have run properly
[Sat Aug 15 04:23:10 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug 15 04:23:10 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14026_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Aug 15 04:23:10 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug 15 04:23:10 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14026_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Aug 15 04:23:10 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14026_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14026_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:37:14 2015] Spatial fit model total counts = 18.892000, observed total counts = 21.000000
[Sat Aug 15 04:37:14 2015] Offset between fit and detection position for source 2 = 0.611848 pixels
[Sat Aug 15 04:37:14 2015] 18.732260 total counts/ 1.246060 bgd. counts: snr = 15.664840
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.611848 pixels
  Position = (391.7, 642.9) = 12 0 16.91 55 39 34.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 17.5 +/- 4.3
  Background counts = 1.2
  Rate = 0.0004 +/- 9e-05
[Sat Aug 15 04:37:14 2015] Vigneting correction estimate = 1.000000
[Sat Aug 15 04:37:14 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 15 04:37:14 2015] Assessing source extent using major axis lower bound
[Sat Aug 15 04:37:14 2015] Source does appear to be extended
[Sat Aug 15 04:37:14 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 15 04:48:13 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:48:13 2015] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Aug 15 04:48:13 2015] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.969
[Sat Aug 15 04:48:13 2015] Giving source the simple spatial ID 2 for pass 1, mean size = 0.62"
[Sat Aug 15 04:55:00 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass1_src2.ximg exists
[Sat Aug 15 04:55:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14026_pi14-548_cl_pass1_src2.csv
[Sat Aug 15 04:55:00 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Aug 15 04:55:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14026_pi14-548_cl_pass1_src2.csv
[Sat Aug 15 04:55:00 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14026_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14026_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:55:00 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 15 04:55:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14026_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Aug 15 04:55:00 2015] fullrun_ccd1_acisf14026_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 15 04:55:00 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf14026_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Aug 15 04:55:00 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf14026_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf14026_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes