[Sat Aug 15 04:00:31 2015] Detection parameters:
  Position = (581.5, 962.2) = 12 0 41.38 55 35 18.5
  Extent = 0.8" x 0.5", rotation angle = 93 degrees
  Source counts = 38.9 +/- 6.3
  Background counts = 1.1
  Rate = 0.0008 +/- 0.0001

[Sat Aug 15 04:00:32 2015] Off-axis axis estimate = 4.34'
[Sat Aug 15 04:05:57 2015] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:05:57 2015] Initial guess for spatial extent in simple fitting = 0.94"
[Sat Aug 15 04:05:57 2015] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.080
[Sat Aug 15 04:05:57 2015] Giving source the simple spatial ID 2 for pass 0, mean size = 0.94"
[Sat Aug 15 04:16:46 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass0_src2.ximg exists
[Sat Aug 15 04:16:46 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14026_pi14-548_cl_pass0_src2.csv
[Sat Aug 15 04:16:46 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Aug 15 04:16:46 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14026_pi14-548_cl_pass0_src2.csv
[Sat Aug 15 04:16:46 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14026_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14026_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:16:46 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug 15 04:16:46 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14026_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Aug 15 04:16:46 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug 15 04:16:46 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14026_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Aug 15 04:16:46 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14026_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14026_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 15 04:37:13 2015] Spatial fit model total counts = 39.694000, observed total counts = 44.000000
[Sat Aug 15 04:37:13 2015] Offset between fit and detection position for source 2 = 0.665424 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.665424 pixels
  Position = (582.1, 962.5) = 12 0 41.37 55 35 18.4
  Extent = 1.1 (0.9-1.3)" x 0.6 (0.4-0.7)", rotation angle = 98 (81-114) degrees
  Source counts = 40.7 +/- 6.4
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Sat Aug 15 04:37:13 2015] Vigneting correction estimate = 1.000000
[Sat Aug 15 04:37:13 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 15 04:37:13 2015] Assessing source extent using major axis lower bound
[Sat Aug 15 04:37:13 2015] Source does appear to be extended
[Sat Aug 15 04:37:13 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Sat Aug 15 04:37:46 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 15 04:37:46 2015] Initial guess for spatial extent in simple fitting = 0.81"
[Sat Aug 15 04:37:46 2015] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.078
[Sat Aug 15 04:37:46 2015] Giving source the simple spatial ID 2 for pass 1, mean size = 0.81"
[Sat Aug 15 04:48:13 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass1_src2.ximg exists
[Sat Aug 15 04:48:13 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Aug 15 04:48:13 2015] Fit fullrun_ccd0_acisf14026_pi14-548_cl_pass1_src2 appears to have run properly
[Sat Aug 15 04:48:13 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 15 04:48:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14026_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Aug 15 04:48:13 2015] fullrun_ccd0_acisf14026_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 15 04:48:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf14026_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Aug 15 04:48:13 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf14026_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf14026_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes