[Mon May 27 15:57:34 2013] Detection parameters:
  Position = (574.3, 35.6) = 1 3 6.84 -49 20 32.4
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 32.3 +/- 5.8
  Background counts = 1.7
  Rate = 0.0003 +/- 5e-05

[Mon May 27 15:57:34 2013] Off-axis axis estimate = 4.87'
[Mon May 27 17:42:42 2013] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Mon May 27 17:42:42 2013] Initial guess for spatial extent in simple fitting = 1.13"
[Mon May 27 17:42:42 2013] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.545
[Mon May 27 17:42:42 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 1.13"
[Mon May 27 18:13:20 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass0_src18.ximg exists
[Mon May 27 18:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14023_pi14-548_cl_pass0_src18.csv
[Mon May 27 18:13:20 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass0_src18_1.ximg exists
[Mon May 27 18:13:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14023_pi14-548_cl_pass0_src18.csv
[Mon May 27 18:13:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14023_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14023_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 18:13:20 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Mon May 27 18:13:20 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Mon May 27 18:13:20 2013] Fit fullrun_ccd3_acisf14023_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Mon May 27 18:27:08 2013] Spatial fit model total counts = 47.626900, observed total counts = 51.000000
[Mon May 27 18:27:08 2013] Offset between fit and detection position for source 36 = 0.372902 pixels
[Mon May 27 18:27:08 2013] 48.540700 total counts/ 12.793900 bgd. counts: snr = 9.993916
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.372902 pixels
  Position = (574.1, 35.9) = 1 3 6.88 -49 20 32.5
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 35.7 +/- 7.0
  Background counts = 12.8
  Rate = 0.0003 +/- 6e-05
[Mon May 27 18:27:08 2013] Vigneting correction estimate = 1.000000
[Mon May 27 18:27:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 18:27:08 2013] Assessing source extent using major axis lower bound
[Mon May 27 18:27:08 2013] Source does appear to be extended
[Mon May 27 18:27:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:56:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 19:56:50 2013] Initial guess for spatial extent in simple fitting = 0.63"
[Mon May 27 19:56:50 2013] source mask rpix=1.3, npix_max = 12, mask sum = 11, frac = 0.869
[Mon May 27 19:56:50 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 0.63"
[Mon May 27 20:20:41 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass1_src18.ximg exists
[Mon May 27 20:20:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14023_pi14-548_cl_pass1_src18.csv
[Mon May 27 20:20:41 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass1_src18_1.ximg exists
[Mon May 27 20:20:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14023_pi14-548_cl_pass1_src18.csv
[Mon May 27 20:20:41 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14023_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14023_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:20:41 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon May 27 20:20:41 2013] fullrun_ccd3_acisf14023_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon May 27 20:20:41 2013] Fit fullrun_ccd3_acisf14023_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon May 27 20:34:22 2013] Spatial fit model total counts = 48.423700, observed total counts = 51.000000
[Mon May 27 20:34:22 2013] Offset between fit and detection position for source 36 = 0.063099 pixels
[Mon May 27 20:34:22 2013] 49.129600 total counts/ 11.825100 bgd. counts: snr = 10.848228
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.063099 pixels
  Position = (574.1, 36.0) = 1 3 6.88 -49 20 32.4
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 37.3 +/- 7.0
  Background counts = 11.8
  Rate = 0.0003 +/- 6e-05
[Mon May 27 20:34:22 2013] Vigneting correction estimate = 1.000000
[Mon May 27 20:34:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 20:34:22 2013] Assessing source extent using major axis lower bound
[Mon May 27 20:34:22 2013] Source does appear to be extended
[Mon May 27 20:34:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 21:07:42 2013] Writing source region out to fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36_src.reg
[Mon May 27 21:07:42 2013] Extracting stamp from image fullrun_ccd3_acisf14023_pi14-548_cl_sm2.00.img.gz, (545, 6) - (604, 65)
[Mon May 27 21:07:42 2013] Writing fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36.gif
[Mon May 27 21:17:28 2013] Size of ../../acisf14023/products/events/fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36_src.evt.gz[events] = 41 counts
[Mon May 27 21:17:28 2013] Mean chipx,y = (25.49, 1004.76)
[Mon May 27 21:17:28 2013] Mean tdetx,y = (4127.24, 3086.49)
[Mon May 27 21:17:28 2013] chipx,y range = (9.00-42.00, 994.00-1021.00)
[Mon May 27 21:17:28 2013] Size of ../../acisf14023/products/events/fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 12 counts
[Mon May 27 21:17:29 2013] Not generating rmf since there are only 37 counts
[Mon May 27 21:17:29 2013] arf not found, will run specextract
[Mon May 27 21:17:58 2013] ../../acisf14023/products/spectra/fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36.warf not found
[Mon May 27 21:17:58 2013] ../../acisf14023/products/spectra/fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36.wrmf not found
[Mon May 27 21:17:58 2013] Removal of ../../acisf14023/products/spectra/fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36.soff failed
[Mon May 27 21:21:42 2013] Spectrum 36 has only 37 counts, deleting rmf
[Mon May 27 21:21:42 2013] 111.517
[Mon May 27 21:24:25 2013] Updating aperture counts using extracted products
[Mon May 27 21:24:25 2013] Total counts from fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36_src.pi.gz = 41.00
[Mon May 27 21:24:25 2013] Total counts from fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36_bgd.pi.gz = 12.00
[Mon May 27 21:24:26 2013] Got source and background scale factors 0.000001, 0.000015
[Mon May 27 21:24:26 2013] User source parameters:
  Position = (574.1, 36.0) = 1 3 6.88 -49 20 32.4
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source aperture counts = 40.0 +/- 7.5
  Background aperture counts = 1.0
  Rate = 0.0003 +/- 7e-05

[Mon May 27 21:24:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 21:24:27 2013] Using photon index=1.80, rate=0.000326, arf fullrun_ccd3_acisf14023_pi14-548_pass1_cl_src36.arf
[Mon May 27 21:24:27 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 27 21:24:27 2013] Updating source flux to 7.2e-15
[Mon May 27 21:24:52 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting