[Mon May 27 15:56:56 2013] Detection parameters:
  Position = (127.9, 677.4) = 1 3 0.63 -49 22 20.3
  Extent = 0.6" x 0.5", rotation angle = 137 degrees
  Source counts = 21.4 +/- 4.8
  Background counts = 1.6
  Rate = 0.0002 +/- 4e-05

[Mon May 27 15:56:57 2013] Off-axis axis estimate = 5.37'
[Mon May 27 17:10:20 2013] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Mon May 27 17:10:20 2013] Initial guess for spatial extent in simple fitting = 1.34"
[Mon May 27 17:10:20 2013] source mask rpix=2.7, npix_max = 41, mask sum = 39, frac = 0.942
[Mon May 27 17:10:20 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 1.34"
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src18.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src18.csv
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src18_1.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src18.csv
[Mon May 27 17:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src18.csv
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src18.csv
[Mon May 27 17:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 18:27:04 2013] Spatial fit model total counts = 27.994800, observed total counts = 31.000000
[Mon May 27 18:27:04 2013] Offset between fit and detection position for source 7 = 0.539428 pixels
[Mon May 27 18:27:04 2013] 28.919850 total counts/ 7.218950 bgd. counts: snr = 8.076826
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.539428 pixels
  Position = (128.2, 677.8) = 1 3 0.64 -49 22 20.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 21.7 +/- 5.4
  Background counts = 7.2
  Rate = 0.0002 +/- 5e-05
[Mon May 27 18:27:04 2013] Vigneting correction estimate = 1.000000
[Mon May 27 18:27:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 18:27:04 2013] Assessing source extent using major axis lower bound
[Mon May 27 18:27:04 2013] Source does appear to be extended
[Mon May 27 18:27:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:29:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 19:29:52 2013] Initial guess for spatial extent in simple fitting = 0.73"
[Mon May 27 19:29:52 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.024
[Mon May 27 19:29:52 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 0.73"
[Mon May 27 19:56:50 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src18.ximg exists
[Mon May 27 19:56:50 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src18_1.ximg exists
[Mon May 27 19:56:50 2013] Fit fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src18 appears to have run properly
[Mon May 27 19:56:50 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon May 27 19:56:50 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon May 27 19:56:50 2013] Fit fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon May 27 20:34:19 2013] Spatial fit model total counts = 28.660900, observed total counts = 31.000000
[Mon May 27 20:34:19 2013] Offset between fit and detection position for source 7 = 0.085296 pixels
[Mon May 27 20:34:19 2013] 29.380910 total counts/ 7.928710 bgd. counts: snr = 7.618519
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.085296 pixels
  Position = (128.3, 677.9) = 1 3 0.64 -49 22 20.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 21.5 +/- 5.4
  Background counts = 7.9
  Rate = 0.0002 +/- 5e-05
[Mon May 27 20:34:19 2013] Vigneting correction estimate = 1.000000
[Mon May 27 20:34:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 20:34:19 2013] Assessing source extent using major axis lower bound
[Mon May 27 20:34:19 2013] Source does appear to be extended
[Mon May 27 20:34:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 20:48:38 2013] Writing source region out to fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7_src.reg
[Mon May 27 20:48:38 2013] Extracting stamp from image fullrun_ccd2_acisf14023_pi14-548_cl_sm2.00.img.gz, (95, 645) - (161, 711)
[Mon May 27 20:48:38 2013] Writing fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7.gif
[Mon May 27 20:58:18 2013] Size of ../../acisf14023/products/events/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7_src.evt.gz[events] = 24 counts
[Mon May 27 20:58:18 2013] Mean chipx,y = (1004.00, 800.79)
[Mon May 27 20:58:18 2013] Mean tdetx,y = (3861.79, 3082.00)
[Mon May 27 20:58:18 2013] chipx,y range = (995.00-1015.00, 785.00-821.00)
[Mon May 27 20:58:18 2013] Size of ../../acisf14023/products/events/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 13 counts
[Mon May 27 20:58:20 2013] Not generating rmf since there are only 21 counts
[Mon May 27 20:58:20 2013] arf not found, will run specextract
[Mon May 27 20:58:53 2013] ../../acisf14023/products/spectra/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7.warf not found
[Mon May 27 20:58:53 2013] ../../acisf14023/products/spectra/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7.wrmf not found
[Mon May 27 20:58:53 2013] Removal of ../../acisf14023/products/spectra/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7.soff failed
[Mon May 27 21:07:41 2013] Spectrum 7 has only 21 counts, deleting rmf
[Mon May 27 21:07:41 2013] 118.719
[Mon May 27 21:24:21 2013] Updating aperture counts using extracted products
[Mon May 27 21:24:21 2013] Total counts from fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7_src.pi.gz = 24.00
[Mon May 27 21:24:21 2013] Total counts from fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7_bgd.pi.gz = 13.00
[Mon May 27 21:24:21 2013] Got source and background scale factors 0.000002, 0.000019
[Mon May 27 21:24:21 2013] User source parameters:
  Position = (128.3, 677.9) = 1 3 0.64 -49 22 20.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source aperture counts = 22.9 +/- 6.0
  Background aperture counts = 1.1
  Rate = 0.0002 +/- 5e-05

[Mon May 27 21:24:23 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 21:24:23 2013] Using photon index=1.80, rate=0.000188, arf fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src7.arf
[Mon May 27 21:24:23 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 27 21:24:23 2013] Updating source flux to 3.9e-15
[Mon May 27 21:24:46 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting