[Mon May 27 15:56:56 2013] Detection parameters:
  Position = (530.6, 540.5) = 1 2 40.35 -49 23 27.7
  Extent = 0.7" x 0.6", rotation angle = 163 degrees
  Source counts = 29.8 +/- 5.7
  Background counts = 3.2
  Rate = 0.0003 +/- 5e-05

[Mon May 27 15:56:57 2013] Off-axis axis estimate = 5.51'
[Mon May 27 17:10:20 2013] Using EEF radius (= 1.40 ")to estimate initial spatial extent for simple fitting
[Mon May 27 17:10:20 2013] Initial guess for spatial extent in simple fitting = 1.40"
[Mon May 27 17:10:20 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.099
[Mon May 27 17:10:20 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 1.40"
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src15.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src15.csv
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src15_1.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src15.csv
[Mon May 27 17:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14023_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src15.csv
[Mon May 27 17:42:42 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 27 17:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src15.csv
[Mon May 27 17:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14023_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 18:27:04 2013] Spatial fit model total counts = 33.793100, observed total counts = 39.000000
[Mon May 27 18:27:04 2013] Offset between fit and detection position for source 18 = 1.102069 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.102069 pixels
  Position = (531.6, 541.0) = 1 2 40.32 -49 23 27.8
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 35.2 +/- 5.9
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Mon May 27 18:27:04 2013] Vigneting correction estimate = 1.000000
[Mon May 27 18:27:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 18:27:04 2013] Assessing source extent using major axis lower bound
[Mon May 27 18:27:04 2013] Source does appear to be extended
[Mon May 27 18:27:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 19:29:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 19:29:52 2013] Initial guess for spatial extent in simple fitting = 1.17"
[Mon May 27 19:29:52 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.903
[Mon May 27 19:29:52 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 1.17"
[Mon May 27 19:56:49 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src15.ximg exists
[Mon May 27 19:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src15.csv
[Mon May 27 19:56:49 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src15_1.ximg exists
[Mon May 27 19:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src15.csv
[Mon May 27 19:56:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14023_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 19:56:50 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon May 27 19:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon May 27 19:56:50 2013] fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 27 19:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon May 27 19:56:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14023_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:34:19 2013] Spatial fit model total counts = 34.164800, observed total counts = 38.000000
[Mon May 27 20:34:19 2013] Offset between fit and detection position for source 18 = 0.152690 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.152690 pixels
  Position = (531.5, 541.1) = 1 2 40.33 -49 23 27.7
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 35.3 +/- 5.9
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Mon May 27 20:34:19 2013] Vigneting correction estimate = 1.000000
[Mon May 27 20:34:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 20:34:19 2013] Assessing source extent using major axis lower bound
[Mon May 27 20:34:19 2013] Source does appear to be extended
[Mon May 27 20:34:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 20:48:38 2013] Writing source region out to fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18_src.reg
[Mon May 27 20:48:38 2013] Extracting stamp from image fullrun_ccd2_acisf14023_pi14-548_cl_sm2.00.img.gz, (478, 488) - (585, 595)
[Mon May 27 20:48:38 2013] Writing fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18.gif
[Mon May 27 20:56:54 2013] Size of ../../acisf14023/products/events/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18_src.evt.gz[events] = 37 counts
[Mon May 27 20:56:54 2013] Mean chipx,y = (745.65, 466.95)
[Mon May 27 20:56:54 2013] Mean tdetx,y = (3527.95, 3340.35)
[Mon May 27 20:56:54 2013] chipx,y range = (723.00-766.00, 450.00-495.00)
[Mon May 27 20:56:54 2013] Size of ../../acisf14023/products/events/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 86 counts
[Mon May 27 20:56:55 2013] Not generating rmf since there are only 35 counts
[Mon May 27 20:56:55 2013] arf not found, will run specextract
[Mon May 27 20:57:19 2013] ../../acisf14023/products/spectra/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18.warf not found
[Mon May 27 20:57:19 2013] ../../acisf14023/products/spectra/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18.wrmf not found
[Mon May 27 20:57:19 2013] Removal of ../../acisf14023/products/spectra/fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18.soff failed
[Mon May 27 21:07:41 2013] Spectrum 18 has only 35 counts, deleting rmf
[Mon May 27 21:07:41 2013] 177.305
[Mon May 27 21:24:20 2013] Updating aperture counts using extracted products
[Mon May 27 21:24:20 2013] Total counts from fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18_src.pi.gz = 37.00
[Mon May 27 21:24:20 2013] Total counts from fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18_bgd.pi.gz = 86.00
[Mon May 27 21:24:20 2013] Got source and background scale factors 0.000004, 0.000050
[Mon May 27 21:24:20 2013] User source parameters:
  Position = (531.5, 541.1) = 1 2 40.33 -49 23 27.7
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source aperture counts = 29.7 +/- 7.1
  Background aperture counts = 7.3
  Rate = 0.0003 +/- 6e-05

[Mon May 27 21:24:23 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 21:24:23 2013] Using photon index=1.80, rate=0.000309, arf fullrun_ccd2_acisf14023_pi14-548_pass1_cl_src18.arf
[Mon May 27 21:24:23 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 27 21:24:23 2013] Updating source flux to 4.2e-15
[Mon May 27 21:24:46 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting