[Fri May 24 00:38:44 2013] Detection parameters:
  Position = (483.2, 607.6) = 22 42 18.14 53 3 9.9
  Extent = 0.5" x 0.5", rotation angle = 5 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.0003 +/- 9e-05

[Fri May 24 00:38:45 2013] Off-axis axis estimate = 4.32'
[Fri May 24 01:25:44 2013] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Fri May 24 01:25:44 2013] Initial guess for spatial extent in simple fitting = 0.93"
[Fri May 24 01:25:44 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.095
[Fri May 24 01:25:44 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.93"
[Fri May 24 01:38:48 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass0_src11.ximg exists
[Fri May 24 01:38:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass0_src11.csv
[Fri May 24 01:38:48 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass0_src11_1.ximg exists
[Fri May 24 01:38:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass0_src11.csv
[Fri May 24 01:38:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14020_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14020_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 01:38:48 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri May 24 01:38:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass0_tfrozen_src11.csv
[Fri May 24 01:38:48 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri May 24 01:38:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass0_tfrozen_src11.csv
[Fri May 24 01:38:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14020_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14020_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 01:55:39 2013] Spatial fit model total counts = 12.114500, observed total counts = 14.000000
[Fri May 24 01:55:39 2013] Offset between fit and detection position for source 5 = 0.714235 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.714235 pixels
  Position = (483.7, 608.1) = 22 42 18.14 53 3 9.9
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.1 +/- 3.3
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Fri May 24 01:55:39 2013] Vigneting correction estimate = 1.000000
[Fri May 24 01:55:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 01:55:39 2013] Assessing source extent using major axis lower bound
[Fri May 24 01:55:39 2013] Source does appear to be extended
[Fri May 24 01:55:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 02:36:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 02:36:18 2013] Initial guess for spatial extent in simple fitting = 0.40"
[Fri May 24 02:36:18 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.864
[Fri May 24 02:36:18 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.40"
[Fri May 24 02:48:09 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass1_src10.ximg exists
[Fri May 24 02:48:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass1_src10.csv
[Fri May 24 02:48:09 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass1_src10_1.ximg exists
[Fri May 24 02:48:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass1_src10.csv
[Fri May 24 02:48:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14020_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14020_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 02:48:09 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri May 24 02:48:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri May 24 02:48:09 2013] fullrun_ccd3_acisf14020_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 24 02:48:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14020_pi14-548_cl_pass1_tfrozen_src10.csv
[Fri May 24 02:48:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14020_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14020_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 02:58:57 2013] Spatial fit model total counts = 10.970600, observed total counts = 13.000000
[Fri May 24 02:58:57 2013] Offset between fit and detection position for source 5 = 0.012223 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.012223 pixels
  Position = (483.7, 608.1) = 22 42 18.14 53 3 9.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.4 +/- 3.2
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Fri May 24 02:58:57 2013] Vigneting correction estimate = 1.000000
[Fri May 24 02:58:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 02:58:57 2013] Assessing source extent using major axis lower bound
[Fri May 24 02:58:57 2013] Source does appear to be extended
[Fri May 24 02:58:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 03:25:32 2013] Writing source region out to fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5_src.reg
[Fri May 24 03:25:32 2013] Extracting stamp from image fullrun_ccd3_acisf14020_pi14-548_cl_sm2.00.img.gz, (466, 590) - (502, 626)
[Fri May 24 03:25:32 2013] Writing fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5.gif
[Fri May 24 03:31:32 2013] Size of ../../acisf14020/products/events/fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5_src.evt.gz[events] = 11 counts
[Fri May 24 03:31:32 2013] Mean chipx,y = (727.55, 535.09)
[Fri May 24 03:31:32 2013] Mean tdetx,y = (4596.91, 3788.55)
[Fri May 24 03:31:32 2013] chipx,y range = (709.00-743.00, 523.00-549.00)
[Fri May 24 03:31:32 2013] Size of ../../acisf14020/products/events/fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 6 counts
[Fri May 24 03:31:33 2013] Not generating rmf since there are only 10 counts
[Fri May 24 03:31:33 2013] arf not found, will run specextract
[Fri May 24 03:31:58 2013] ../../acisf14020/products/spectra/fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5.warf not found
[Fri May 24 03:31:58 2013] ../../acisf14020/products/spectra/fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5.wrmf not found
[Fri May 24 03:31:58 2013] Removal of ../../acisf14020/products/spectra/fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5.soff failed
[Fri May 24 03:35:01 2013] Spectrum 5 has only 10 counts, deleting rmf
[Fri May 24 03:35:01 2013] 189.907
[Fri May 24 03:35:31 2013] Updating aperture counts using extracted products
[Fri May 24 03:35:31 2013] Total counts from fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5_src.pi.gz = 11.00
[Fri May 24 03:35:31 2013] Total counts from fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5_bgd.pi.gz = 6.00
[Fri May 24 03:35:31 2013] Got source and background scale factors 0.000000, 0.000006
[Fri May 24 03:35:31 2013] User source parameters:
  Position = (483.7, 608.1) = 22 42 18.14 53 3 9.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 10.5 +/- 4.4
  Background aperture counts = 0.5
  Rate = 0.0003 +/- 0.0001

[Fri May 24 03:35:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 03:35:32 2013] Using photon index=1.80, rate=0.000276, arf fullrun_ccd3_acisf14020_pi14-548_pass1_cl_src5.arf
[Fri May 24 03:35:32 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 24 03:35:32 2013] Updating source flux to 3.4e-15
[Fri May 24 03:35:43 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting