[Fri May 24 00:38:12 2013] Detection parameters:
  Position = (634.8, 475.4) = 22 42 36.76 53 9 34.7
  Extent = 0.8" x 0.5", rotation angle = 141 degrees
  Source counts = 13.6 +/- 3.9
  Background counts = 1.4
  Rate = 0.0004 +/- 0.0001

[Fri May 24 00:38:12 2013] Off-axis axis estimate = 3.88'
[Fri May 24 01:09:13 2013] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Fri May 24 01:09:13 2013] Initial guess for spatial extent in simple fitting = 0.79"
[Fri May 24 01:09:13 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.117
[Fri May 24 01:09:13 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.79"
[Fri May 24 01:25:44 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass0_src11.ximg exists
[Fri May 24 01:25:44 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass0_src11_1.ximg exists
[Fri May 24 01:25:44 2013] Fit fullrun_ccd2_acisf14020_pi14-548_cl_pass0_src11 appears to have run properly
[Fri May 24 01:25:44 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri May 24 01:25:44 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri May 24 01:25:44 2013] Fit fullrun_ccd2_acisf14020_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri May 24 01:55:37 2013] Spatial fit model total counts = 14.344400, observed total counts = 15.000000
[Fri May 24 01:55:37 2013] Offset between fit and detection position for source 9 = 0.705062 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.705062 pixels
  Position = (635.2, 476.0) = 22 42 36.77 53 9 34.7
  Extent = 1.2 (0.8-1.6)" x 0.6 (0.4-0.8)", rotation angle = 217 (195-242) degrees
  Source counts = 14.3 +/- 3.8
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri May 24 01:55:37 2013] Vigneting correction estimate = 1.000000
[Fri May 24 01:55:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 01:55:37 2013] Assessing source extent using major axis lower bound
[Fri May 24 01:55:37 2013] Source does appear to be extended
[Fri May 24 01:55:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Fri May 24 02:19:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 02:19:31 2013] Initial guess for spatial extent in simple fitting = 0.89"
[Fri May 24 02:19:31 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.942
[Fri May 24 02:19:31 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.89"
[Fri May 24 02:36:18 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass1_src11.ximg exists
[Fri May 24 02:36:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14020_pi14-548_cl_pass1_src11.csv
[Fri May 24 02:36:18 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass1_src11_1.ximg exists
[Fri May 24 02:36:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14020_pi14-548_cl_pass1_src11.csv
[Fri May 24 02:36:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14020_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14020_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 02:36:18 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri May 24 02:36:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14020_pi14-548_cl_pass1_tfrozen_src11.csv
[Fri May 24 02:36:18 2013] fullrun_ccd2_acisf14020_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 24 02:36:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14020_pi14-548_cl_pass1_tfrozen_src11.csv
[Fri May 24 02:36:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14020_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14020_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 02:58:56 2013] Spatial fit model total counts = 14.343400, observed total counts = 17.000000
[Fri May 24 02:58:56 2013] Offset between fit and detection position for source 9 = 0.244919 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.244919 pixels
  Position = (635.3, 475.8) = 22 42 36.76 53 9 34.6
  Extent = 1.1 (0.7-1.6)" x 0.5 (0.3-0.7)", rotation angle = 220 (199-242) degrees
  Source counts = 15.2 +/- 3.9
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri May 24 02:58:56 2013] Vigneting correction estimate = 1.000000
[Fri May 24 02:58:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 02:58:56 2013] Assessing source extent using major axis lower bound
[Fri May 24 02:58:56 2013] Source does appear to be extended
[Fri May 24 02:58:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Fri May 24 03:14:10 2013] Writing source region out to fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9_src.reg
[Fri May 24 03:14:10 2013] Extracting stamp from image fullrun_ccd2_acisf14020_pi14-548_cl_sm2.00.img.gz, (583, 423) - (688, 528)
[Fri May 24 03:14:10 2013] Writing fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9.gif
[Fri May 24 03:20:39 2013] Size of ../../acisf14020/products/events/fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9_src.evt.gz[events] = 15 counts
[Fri May 24 03:20:39 2013] Mean chipx,y = (359.67, 678.53)
[Fri May 24 03:20:39 2013] Mean tdetx,y = (3739.53, 3726.33)
[Fri May 24 03:20:39 2013] chipx,y range = (345.00-377.00, 660.00-697.00)
[Fri May 24 03:20:39 2013] Size of ../../acisf14020/products/events/fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 52 counts
[Fri May 24 03:20:41 2013] Not generating rmf since there are only 15 counts
[Fri May 24 03:20:41 2013] arf not found, will run specextract
[Fri May 24 03:21:08 2013] ../../acisf14020/products/spectra/fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9.warf not found
[Fri May 24 03:21:08 2013] ../../acisf14020/products/spectra/fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9.wrmf not found
[Fri May 24 03:21:08 2013] Removal of ../../acisf14020/products/spectra/fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9.soff failed
[Fri May 24 03:25:31 2013] Spectrum 9 has only 15 counts, deleting rmf
[Fri May 24 03:25:31 2013] 187.307
[Fri May 24 03:35:28 2013] Updating aperture counts using extracted products
[Fri May 24 03:35:28 2013] Total counts from fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9_src.pi.gz = 15.00
[Fri May 24 03:35:28 2013] Total counts from fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9_bgd.pi.gz = 52.00
[Fri May 24 03:35:28 2013] Got source and background scale factors 0.000002, 0.000048
[Fri May 24 03:35:28 2013] User source parameters:
  Position = (635.3, 475.8) = 22 42 36.76 53 9 34.6
  Extent = 1.1 (0.7-1.6)" x 0.5 (0.3-0.7)", rotation angle = 220 (199-242) degrees
  Source aperture counts = 13.0 +/- 5.0
  Background aperture counts = 2.0
  Rate = 0.0003 +/- 0.0001

[Fri May 24 03:35:29 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 03:35:29 2013] Using photon index=1.80, rate=0.000406, arf fullrun_ccd2_acisf14020_pi14-548_pass1_cl_src9.arf
[Fri May 24 03:35:29 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 24 03:35:29 2013] Updating source flux to 5.1e-15
[Fri May 24 03:35:39 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting