[Tue Jun 25 10:27:04 2013] Detection parameters:
  Position = (1110.3, 346.5) = 15 11 51.77 -22 57 8.5
  Extent = 0.5" x 0.5", rotation angle = 13 degrees
  Source counts = 15.6 +/- 4.0
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0001

[Tue Jun 25 10:27:04 2013] Off-axis axis estimate = 1.54'
[Tue Jun 25 11:10:22 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 11:10:22 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Jun 25 11:10:22 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.328
[Tue Jun 25 11:10:22 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 0.39"
[Tue Jun 25 11:40:36 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass0_src19.ximg exists
[Tue Jun 25 11:40:36 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass0_src19_1.ximg exists
[Tue Jun 25 11:40:36 2013] Fit fullrun_ccd3_acisf14016_pi14-548_cl_pass0_src19 appears to have run properly
[Tue Jun 25 11:40:36 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Tue Jun 25 11:40:36 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jun 25 11:40:36 2013] Fit fullrun_ccd3_acisf14016_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Jun 25 13:07:18 2013] Spatial fit model total counts = 17.763200, observed total counts = 18.000000
[Tue Jun 25 13:07:18 2013] Offset between fit and detection position for source 12 = 0.818981 pixels
[Tue Jun 25 13:07:18 2013] 17.396320 total counts/ 2.400720 bgd. counts: snr = 9.678167
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.818981 pixels
  Position = (1111.0, 347.0) = 15 11 51.76 -22 57 8.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.0 +/- 4.2
  Background counts = 2.4
  Rate = 0.0004 +/- 0.0001
[Tue Jun 25 13:07:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 13:07:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 13:07:18 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 13:07:18 2013] Source does appear to be extended
[Tue Jun 25 13:07:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 13:48:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 13:48:08 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Jun 25 13:48:08 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.607
[Tue Jun 25 13:48:08 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 0.39"
[Tue Jun 25 14:19:02 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass1_src19.ximg exists
[Tue Jun 25 14:19:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14016_pi14-548_cl_pass1_src19.csv
[Tue Jun 25 14:19:02 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass1_src19_1.ximg exists
[Tue Jun 25 14:19:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14016_pi14-548_cl_pass1_src19.csv
[Tue Jun 25 14:19:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14016_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14016_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 14:19:02 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Tue Jun 25 14:19:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14016_pi14-548_cl_pass1_tfrozen_src19.csv
[Tue Jun 25 14:19:02 2013] fullrun_ccd3_acisf14016_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Jun 25 14:19:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14016_pi14-548_cl_pass1_tfrozen_src19.csv
[Tue Jun 25 14:19:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14016_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14016_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 15:55:15 2013] Spatial fit model total counts = 15.981200, observed total counts = 18.000000
[Tue Jun 25 15:55:15 2013] Offset between fit and detection position for source 12 = 0.011787 pixels
[Tue Jun 25 15:55:15 2013] 15.230540 total counts/ 1.056840 bgd. counts: snr = 13.787281
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.011787 pixels
  Position = (1111.0, 347.0) = 15 11 51.76 -22 57 8.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.2 +/- 3.9
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001
[Tue Jun 25 15:55:15 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 15:55:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 15:55:15 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 15:55:15 2013] Source does appear to be extended
[Tue Jun 25 15:55:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 16:10:19 2013] Writing source region out to fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12_src.reg
[Tue Jun 25 16:10:19 2013] Extracting stamp from image fullrun_ccd3_acisf14016_pi14-548_cl_sm2.00.img.gz, (1094, 330) - (1128, 364)
[Tue Jun 25 16:10:19 2013] Writing fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12.gif
[Tue Jun 25 16:20:59 2013] Size of ../../acisf14016/products/events/fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12_src.evt.gz[events] = 16 counts
[Tue Jun 25 16:20:59 2013] Mean chipx,y = (983.94, 838.31)
[Tue Jun 25 16:20:59 2013] Mean tdetx,y = (4293.69, 4044.94)
[Tue Jun 25 16:20:59 2013] chipx,y range = (973.00-1005.00, 822.00-854.00)
[Tue Jun 25 16:20:59 2013] Size of ../../acisf14016/products/events/fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 2 counts
[Tue Jun 25 16:21:01 2013] Not generating rmf since there are only 14 counts
[Tue Jun 25 16:21:01 2013] arf not found, will run specextract
[Tue Jun 25 16:21:28 2013] ../../acisf14016/products/spectra/fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12.warf not found
[Tue Jun 25 16:21:28 2013] ../../acisf14016/products/spectra/fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12.wrmf not found
[Tue Jun 25 16:21:28 2013] Removal of ../../acisf14016/products/spectra/fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12.soff failed
[Tue Jun 25 16:24:16 2013] Spectrum 12 has only 14 counts, deleting rmf
[Tue Jun 25 16:24:16 2013] 202.017
[Tue Jun 25 16:27:44 2013] Updating aperture counts using extracted products
[Tue Jun 25 16:27:44 2013] Total counts from fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12_src.pi.gz = 16.00
[Tue Jun 25 16:27:44 2013] Total counts from fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12_bgd.pi.gz = 2.00
[Tue Jun 25 16:27:44 2013] Got source and background scale factors 0.000000, 0.000005
[Tue Jun 25 16:27:44 2013] User source parameters:
  Position = (1111.0, 347.0) = 15 11 51.76 -22 57 8.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 15.8 +/- 5.1
  Background aperture counts = 0.2
  Rate = 0.0005 +/- 0.0001

[Tue Jun 25 16:27:45 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 16:27:45 2013] Using photon index=1.80, rate=0.000411, arf fullrun_ccd3_acisf14016_pi14-548_pass1_cl_src12.arf
[Tue Jun 25 16:27:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jun 25 16:27:45 2013] Updating source flux to 4.6e-15
[Tue Jun 25 16:28:04 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting