[Thu Jul 18 20:42:23 2013] Detection parameters:
  Position = (1131.4, 875.9) = 14 50 50.02 -0 6 34.4
  Extent = 1.2" x 0.5", rotation angle = 164 degrees
  Source counts = 16.3 +/- 4.1
  Background counts = 0.7
  Rate = 0.0006 +/- 0.0002

[Thu Jul 18 20:42:23 2013] Off-axis axis estimate = 4.51'
[Thu Jul 18 21:19:26 2013] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Thu Jul 18 21:19:26 2013] Initial guess for spatial extent in simple fitting = 1.00"
[Thu Jul 18 21:19:26 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Thu Jul 18 21:19:26 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 1.00"
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src5.ximg exists
[Thu Jul 18 21:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src5.csv
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Jul 18 21:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src5.csv
[Thu Jul 18 21:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jul 18 21:28:15 2013] Fit fullrun_ccd2_acisf14008_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jul 18 21:54:48 2013] Spatial fit model total counts = 13.633500, observed total counts = 16.000000
[Thu Jul 18 21:54:48 2013] Offset between fit and detection position for source 6 = 0.608675 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.608675 pixels
  Position = (1132.1, 875.8) = 14 50 50.02 -0 6 34.6
  Extent = 1.3 (0.9-1.9)" x 0.4 (0.2-0.7)", rotation angle = 6 (354-22) degrees
  Source counts = 14.0 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Jul 18 21:54:48 2013] Vigneting correction estimate = 1.000000
[Thu Jul 18 21:54:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 18 21:54:48 2013] Assessing source extent using major axis lower bound
[Thu Jul 18 21:54:48 2013] Source does appear to be extended
[Thu Jul 18 21:54:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Thu Jul 18 22:19:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 18 22:19:28 2013] Initial guess for spatial extent in simple fitting = 0.83"
[Thu Jul 18 22:19:28 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Thu Jul 18 22:19:28 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.83"
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src5.ximg exists
[Thu Jul 18 22:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src5.csv
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Jul 18 22:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src5.csv
[Thu Jul 18 22:28:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Jul 18 22:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jul 18 22:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu Jul 18 22:28:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 22:51:03 2013] Spatial fit model total counts = 14.836900, observed total counts = 17.000000
[Thu Jul 18 22:51:03 2013] Offset between fit and detection position for source 6 = 0.540601 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.540601 pixels
  Position = (1132.6, 875.7) = 14 50 50.00 -0 6 34.7
  Extent = 1.7 (1.6-1.7)" x 0.4 (0.2-0.6)", rotation angle = 7 (358-16) degrees
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Thu Jul 18 22:51:03 2013] Vigneting correction estimate = 1.000000
[Thu Jul 18 22:51:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 18 22:51:03 2013] Assessing source extent using major axis lower bound
[Thu Jul 18 22:51:03 2013] Source does appear to be extended
[Thu Jul 18 22:51:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.95
[Thu Jul 18 22:51:03 2013] Source is asymmetric
[Thu Jul 18 23:05:06 2013] Writing source region out to fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6_src.reg
[Thu Jul 18 23:05:06 2013] Extracting stamp from image fullrun_ccd2_acisf14008_pi14-548_cl_sm2.00.img.gz, (1057, 800) - (1208, 951)
[Thu Jul 18 23:05:06 2013] Writing fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6.gif
[Thu Jul 18 23:07:56 2013] Size of ../../acisf14008/products/events/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6_src.evt.gz[events] = 15 counts
[Thu Jul 18 23:07:56 2013] Mean chipx,y = (16.87, 497.00)
[Thu Jul 18 23:07:56 2013] Mean tdetx,y = (3558.00, 4069.13)
[Thu Jul 18 23:07:56 2013] chipx,y range = (3.00-31.00, 482.00-520.00)
[Thu Jul 18 23:07:56 2013] Size of ../../acisf14008/products/events/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 15 counts
[Thu Jul 18 23:07:58 2013] Not generating rmf since there are only 15 counts
[Thu Jul 18 23:07:58 2013] arf not found, will run specextract
[Thu Jul 18 23:08:30 2013] ../../acisf14008/products/spectra/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6.warf not found
[Thu Jul 18 23:08:30 2013] ../../acisf14008/products/spectra/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6.wrmf not found
[Thu Jul 18 23:08:30 2013] Removal of ../../acisf14008/products/spectra/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6.soff failed
[Thu Jul 18 23:11:05 2013] Spectrum 6 has only 15 counts, deleting rmf
[Thu Jul 18 23:11:05 2013] 113.584
[Thu Jul 18 23:27:23 2013] Updating aperture counts using extracted products
[Thu Jul 18 23:27:23 2013] Total counts from fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6_src.pi.gz = 15.00
[Thu Jul 18 23:27:23 2013] Total counts from fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6_bgd.pi.gz = 15.00
[Thu Jul 18 23:27:23 2013] Got source and background scale factors 0.000002, 0.000100
[Thu Jul 18 23:27:23 2013] User source parameters:
  Position = (1132.6, 875.7) = 14 50 50.00 -0 6 34.7
  Extent = 1.7 (1.6-1.7)" x 0.4 (0.2-0.6)", rotation angle = 7 (358-16) degrees
  Source aperture counts = 14.7 +/- 5.0
  Background aperture counts = 0.3
  Rate = 0.0006 +/- 0.0002

[Thu Jul 18 23:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 18 23:27:24 2013] Using photon index=1.80, rate=0.000584, arf fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src6.arf
[Thu Jul 18 23:27:24 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 18 23:27:24 2013] Updating source flux to 1.2e-14
[Thu Jul 18 23:27:43 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting