[Thu Jul 18 20:42:23 2013] Detection parameters:
  Position = (758.7, 771.8) = 14 51 2.25 -0 7 25.6
  Extent = 1.0" x 0.5", rotation angle = 146 degrees
  Source counts = 17.2 +/- 4.2
  Background counts = 0.8
  Rate = 0.0007 +/- 0.0002

[Thu Jul 18 20:42:23 2013] Off-axis axis estimate = 4.75'
[Thu Jul 18 21:19:26 2013] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Thu Jul 18 21:19:26 2013] Initial guess for spatial extent in simple fitting = 1.08"
[Thu Jul 18 21:19:26 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.026
[Thu Jul 18 21:19:26 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 1.08"
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src4.ximg exists
[Thu Jul 18 21:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src4.csv
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Jul 18 21:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src4.csv
[Thu Jul 18 21:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14008_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul 18 21:28:15 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul 18 21:28:15 2013] Fit fullrun_ccd2_acisf14008_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jul 18 21:54:48 2013] Spatial fit model total counts = 17.535600, observed total counts = 19.000000
[Thu Jul 18 21:54:48 2013] Offset between fit and detection position for source 2 = 0.744484 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.744484 pixels
  Position = (758.9, 772.5) = 14 51 2.26 -0 7 25.5
  Extent = 1.4 (0.9-2.2)" x 0.5 (0.4-0.7)", rotation angle = 32 (19-48) degrees
  Source counts = 18.3 +/- 4.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Thu Jul 18 21:54:48 2013] Vigneting correction estimate = 1.000000
[Thu Jul 18 21:54:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 18 21:54:48 2013] Assessing source extent using major axis lower bound
[Thu Jul 18 21:54:48 2013] Source does appear to be extended
[Thu Jul 18 21:54:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Thu Jul 18 22:19:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 18 22:19:28 2013] Initial guess for spatial extent in simple fitting = 0.93"
[Thu Jul 18 22:19:28 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.088
[Thu Jul 18 22:19:28 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.93"
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src4.ximg exists
[Thu Jul 18 22:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src4.csv
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Jul 18 22:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src4.csv
[Thu Jul 18 22:28:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf14008_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul 18 22:28:00 2013] fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul 18 22:28:00 2013] Fit fullrun_ccd2_acisf14008_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jul 18 22:51:03 2013] Spatial fit model total counts = 17.606100, observed total counts = 19.000000
[Thu Jul 18 22:51:03 2013] Offset between fit and detection position for source 2 = 0.157369 pixels
[Thu Jul 18 22:51:03 2013] 18.392339 total counts/ 0.011439 bgd. counts: snr = 171.858432
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.157369 pixels
  Position = (758.9, 772.4) = 14 51 2.25 -0 7 25.5
  Extent = 1.4 (1.0-1.9)" x 0.5 (0.4-0.7)", rotation angle = 33 (21-49) degrees
  Source counts = 18.4 +/- 4.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Thu Jul 18 22:51:03 2013] Vigneting correction estimate = 1.000000
[Thu Jul 18 22:51:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 18 22:51:03 2013] Assessing source extent using major axis lower bound
[Thu Jul 18 22:51:03 2013] Source does appear to be extended
[Thu Jul 18 22:51:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.49
[Thu Jul 18 23:05:06 2013] Writing source region out to fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2_src.reg
[Thu Jul 18 23:05:06 2013] Extracting stamp from image fullrun_ccd2_acisf14008_pi14-548_cl_sm2.00.img.gz, (696, 709) - (822, 836)
[Thu Jul 18 23:05:06 2013] Writing fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2.gif
[Thu Jul 18 23:07:18 2013] Size of ../../acisf14008/products/events/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2_src.evt.gz[events] = 16 counts
[Thu Jul 18 23:07:18 2013] Mean chipx,y = (393.62, 570.62)
[Thu Jul 18 23:07:18 2013] Mean tdetx,y = (3631.62, 3692.38)
[Thu Jul 18 23:07:18 2013] chipx,y range = (377.00-411.00, 550.00-584.00)
[Thu Jul 18 23:07:18 2013] Size of ../../acisf14008/products/events/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 31 counts
[Thu Jul 18 23:07:19 2013] Not generating rmf since there are only 18 counts
[Thu Jul 18 23:07:19 2013] arf not found, will run specextract
[Thu Jul 18 23:07:48 2013] ../../acisf14008/products/spectra/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2.warf not found
[Thu Jul 18 23:07:48 2013] ../../acisf14008/products/spectra/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2.wrmf not found
[Thu Jul 18 23:07:48 2013] Removal of ../../acisf14008/products/spectra/fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2.soff failed
[Thu Jul 18 23:11:05 2013] Spectrum 2 has only 18 counts, deleting rmf
[Thu Jul 18 23:11:05 2013] 183.021
[Thu Jul 18 23:27:23 2013] Updating aperture counts using extracted products
[Thu Jul 18 23:27:23 2013] Total counts from fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2_src.pi.gz = 16.00
[Thu Jul 18 23:27:23 2013] Total counts from fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2_bgd.pi.gz = 31.00
[Thu Jul 18 23:27:23 2013] Got source and background scale factors 0.000002, 0.000070
[Thu Jul 18 23:27:23 2013] User source parameters:
  Position = (758.9, 772.4) = 14 51 2.25 -0 7 25.5
  Extent = 1.4 (1.0-1.9)" x 0.5 (0.4-0.7)", rotation angle = 33 (21-49) degrees
  Source aperture counts = 15.0 +/- 5.1
  Background aperture counts = 1.0
  Rate = 0.0006 +/- 0.0002

[Thu Jul 18 23:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 18 23:27:24 2013] Using photon index=1.80, rate=0.000714, arf fullrun_ccd2_acisf14008_pi14-548_pass1_cl_src2.arf
[Thu Jul 18 23:27:24 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 18 23:27:24 2013] Updating source flux to 9e-15
[Thu Jul 18 23:27:43 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting