[Wed May  8 12:12:26 2013] Detection parameters:
  Position = (678.1, 902.8) = 14 28 26.10 0 42 42.0
  Extent = 0.8" x 0.5", rotation angle = 28 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.0002 +/- 6e-05

[Wed May  8 12:12:26 2013] Off-axis axis estimate = 4.95'
[Wed May  8 13:11:16 2013] Using EEF radius (= 1.16 ")to estimate initial spatial extent for simple fitting
[Wed May  8 13:11:16 2013] Initial guess for spatial extent in simple fitting = 1.16"
[Wed May  8 13:11:16 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Wed May  8 13:11:16 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 1.16"
[Wed May  8 13:32:08 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass0_src16.ximg exists
[Wed May  8 13:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14006_pi14-548_cl_pass0_src16.csv
[Wed May  8 13:32:08 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass0_src16_1.ximg exists
[Wed May  8 13:32:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14006_pi14-548_cl_pass0_src16.csv
[Wed May  8 13:32:08 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14006_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14006_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 13:32:08 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Wed May  8 13:32:08 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Wed May  8 13:32:08 2013] Fit fullrun_ccd3_acisf14006_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Wed May  8 13:45:28 2013] Spatial fit model total counts = 20.630900, observed total counts = 24.000000
[Wed May  8 13:45:28 2013] Offset between fit and detection position for source 15 = 1.288003 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.288003 pixels
  Position = (678.7, 904.0) = 14 28 26.10 0 42 42.4
  Extent = 1.5 (0.9-2.1)" x 0.8 (0.6-1.2)", rotation angle = 98 (70-128) degrees
  Source counts = 21.3 +/- 4.6
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Wed May  8 13:45:28 2013] Vigneting correction estimate = 1.000000
[Wed May  8 13:45:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 13:45:28 2013] Assessing source extent using major axis lower bound
[Wed May  8 13:45:28 2013] Source does appear to be extended
[Wed May  8 13:45:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.81
[Wed May  8 14:42:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 14:42:55 2013] Initial guess for spatial extent in simple fitting = 1.17"
[Wed May  8 14:42:55 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.081
[Wed May  8 14:42:55 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 1.17"
[Wed May  8 15:00:38 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass1_src16.ximg exists
[Wed May  8 15:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14006_pi14-548_cl_pass1_src16.csv
[Wed May  8 15:00:38 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass1_src16_1.ximg exists
[Wed May  8 15:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14006_pi14-548_cl_pass1_src16.csv
[Wed May  8 15:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14006_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14006_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 15:00:38 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Wed May  8 15:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14006_pi14-548_cl_pass1_tfrozen_src16.csv
[Wed May  8 15:00:38 2013] fullrun_ccd3_acisf14006_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Wed May  8 15:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf14006_pi14-548_cl_pass1_tfrozen_src16.csv
[Wed May  8 15:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf14006_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf14006_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 15:11:00 2013] Spatial fit model total counts = 19.908100, observed total counts = 24.000000
[Wed May  8 15:11:00 2013] Offset between fit and detection position for source 15 = 0.643478 pixels
[Wed May  8 15:11:00 2013] 19.671150 total counts/ 1.023550 bgd. counts: snr = 18.431828
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.643478 pixels
  Position = (678.9, 904.5) = 14 28 26.09 0 42 42.7
  Extent = 1.3 (0.8-2.3)" x 0.6 (0.4-0.9)", rotation angle = 91 (68-117) degrees
  Source counts = 18.6 +/- 4.4
  Background counts = 1.0
  Rate = 0.0004 +/- 8e-05
[Wed May  8 15:11:00 2013] Vigneting correction estimate = 1.000000
[Wed May  8 15:11:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 15:11:00 2013] Assessing source extent using major axis lower bound
[Wed May  8 15:11:00 2013] Source does appear to be extended
[Wed May  8 15:11:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.83
[Wed May  8 15:39:23 2013] Writing source region out to fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15_src.reg
[Wed May  8 15:39:23 2013] Extracting stamp from image fullrun_ccd3_acisf14006_pi14-548_cl_sm2.00.img.gz, (617, 843) - (740, 966)
[Wed May  8 15:39:23 2013] Writing fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15.gif
[Wed May  8 15:48:07 2013] Size of ../../acisf14006/products/events/fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15_src.evt.gz[events] = 22 counts
[Wed May  8 15:48:07 2013] Mean chipx,y = (429.00, 699.82)
[Wed May  8 15:48:07 2013] Mean tdetx,y = (4432.18, 3490.00)
[Wed May  8 15:48:07 2013] chipx,y range = (416.00-446.00, 683.00-723.00)
[Wed May  8 15:48:07 2013] Size of ../../acisf14006/products/events/fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 43 counts
[Wed May  8 15:48:08 2013] Not generating rmf since there are only 18 counts
[Wed May  8 15:48:08 2013] arf not found, will run specextract
[Wed May  8 15:48:35 2013] ../../acisf14006/products/spectra/fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15.warf not found
[Wed May  8 15:48:35 2013] ../../acisf14006/products/spectra/fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15.wrmf not found
[Wed May  8 15:48:35 2013] Removal of ../../acisf14006/products/spectra/fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15.soff failed
[Wed May  8 15:52:31 2013] Spectrum 15 has only 19 counts, deleting rmf
[Wed May  8 15:52:31 2013] 182.279
[Wed May  8 15:53:00 2013] Updating aperture counts using extracted products
[Wed May  8 15:53:00 2013] Total counts from fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15_src.pi.gz = 22.00
[Wed May  8 15:53:00 2013] Total counts from fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15_bgd.pi.gz = 43.00
[Wed May  8 15:53:00 2013] Got source and background scale factors 0.000003, 0.000066
[Wed May  8 15:53:00 2013] User source parameters:
  Position = (678.9, 904.5) = 14 28 26.09 0 42 42.7
  Extent = 1.3 (0.8-2.3)" x 0.6 (0.4-0.9)", rotation angle = 91 (68-117) degrees
  Source aperture counts = 20.3 +/- 5.8
  Background aperture counts = 1.7
  Rate = 0.0004 +/- 0.0001

[Wed May  8 15:53:01 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 15:53:01 2013] Using photon index=1.80, rate=0.000354, arf fullrun_ccd3_acisf14006_pi14-548_pass1_cl_src15.arf
[Wed May  8 15:53:01 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 15:53:01 2013] Updating source flux to 4.6e-15
[Wed May  8 15:53:21 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting