[Sun May 19 08:57:17 2013] Detection parameters:
  Position = (950.9, 766.3) = 12 59 16.66 27 53 47.8
  Extent = 1.4" x 0.8", rotation angle = 43 degrees
  Source counts = 59.8 +/- 9.0
  Background counts = 21.2
  Rate = 0.002 +/- 0.0002

[Sun May 19 08:57:17 2013] Off-axis axis estimate = 7.63'
[Sun May 19 09:15:40 2013] Using EEF radius (= 2.58 ")to estimate initial spatial extent for simple fitting
[Sun May 19 09:15:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 09:15:40 2013] Initial guess for spatial extent in simple fitting = 2.58"
[Sun May 19 09:15:40 2013] source mask rpix=5.2, npix_max = 132, mask sum = 92, frac = 0.697
[Sun May 19 09:15:40 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 2.58"
[Sun May 19 09:21:05 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass0_src1.ximg exists
[Sun May 19 09:21:05 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass0_src1_1.ximg exists
[Sun May 19 09:21:05 2013] Fit fullrun_ccd2_acisf13993_pi14-548_cl_pass0_src1 appears to have run properly
[Sun May 19 09:21:05 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun May 19 09:21:05 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 19 09:21:05 2013] Fit fullrun_ccd2_acisf13993_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 19 09:28:28 2013] Spatial fit model total counts = 426.202000, observed total counts = 435.000000
[Sun May 19 09:28:28 2013] Offset between fit and detection position for source 2 = 4.096228 pixels
[Sun May 19 09:28:28 2013] 425.542000 total counts/ 231.563000 bgd. counts: snr = 12.747357
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.096228 pixels
  Position = (949.8, 762.4) = 12 59 16.72 27 53 45.6
  Extent = 2.5 (2.0-3.1)" x 1.5 (1.3-1.9)", rotation angle = 130 (113-146) degrees
  Source counts = 194.0 +/- 20.6
  Background counts = 231.6
  Rate = 0.005 +/- 0.0005
[Sun May 19 09:28:28 2013] Vigneting correction estimate = 1.000000
[Sun May 19 09:28:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 09:28:28 2013] Assessing source extent using major axis lower bound
[Sun May 19 09:28:28 2013] Source does appear to be extended
[Sun May 19 09:28:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Sun May 19 09:36:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 09:36:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 09:36:16 2013] Initial guess for spatial extent in simple fitting = 2.01"
[Sun May 19 09:36:16 2013] source mask rpix=4.1, npix_max = 83, mask sum = 47, frac = 0.560
[Sun May 19 09:36:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 2.01"
[Sun May 19 09:38:38 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass1_src1.ximg exists
[Sun May 19 09:38:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13993_pi14-548_cl_pass1_src1.csv
[Sun May 19 09:38:38 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass1_src1_1.ximg exists
[Sun May 19 09:38:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13993_pi14-548_cl_pass1_src1.csv
[Sun May 19 09:38:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13993_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13993_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 09:38:38 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun May 19 09:38:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13993_pi14-548_cl_pass1_tfrozen_src1.csv
[Sun May 19 09:38:38 2013] fullrun_ccd2_acisf13993_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 19 09:38:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13993_pi14-548_cl_pass1_tfrozen_src1.csv
[Sun May 19 09:38:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13993_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13993_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 09:45:22 2013] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun May 19 09:45:22 2013] Source 1 in spatial fitting is no longer close to this source
[Sun May 19 09:45:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 09:45:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 09:45:22 2013] Assessing source extent using major axis lower bound
[Sun May 19 09:45:22 2013] Source does appear to be extended
[Sun May 19 09:45:22 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Sun May 19 09:49:41 2013] Writing source region out to fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2_src.reg
[Sun May 19 09:49:41 2013] Extracting stamp from image fullrun_ccd2_acisf13993_pi14-548_cl_sm2.00.img.gz, (837, 649) - (1063, 876)
[Sun May 19 09:49:41 2013] Writing fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2.gif
[Sun May 19 09:49:44 2013] Size of ../../acisf13993/products/events/fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2_src.evt.gz[events] = 311 counts
[Sun May 19 09:49:44 2013] Mean chipx,y = (574.65, 258.58)
[Sun May 19 09:49:44 2013] Mean tdetx,y = (3319.58, 3511.35)
[Sun May 19 09:49:44 2013] chipx,y range = (537.00-604.00, 231.00-285.00)
[Sun May 19 09:49:44 2013] Size of ../../acisf13993/products/events/fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1963 counts
[Sun May 19 09:49:45 2013] rmf not found, will run specextract
[Sun May 19 09:49:45 2013] arf not found, will run specextract
[Sun May 19 09:50:07 2013] ../../acisf13993/products/spectra/fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2.warf not found
[Sun May 19 09:50:07 2013] ../../acisf13993/products/spectra/fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2.wrmf not found
[Sun May 19 09:50:07 2013] Removal of ../../acisf13993/products/spectra/fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2.soff failed
[Sun May 19 09:50:52 2013] Keeping rmf generated by specextract
[Sun May 19 09:50:52 2013] 133.883
[Sun May 19 09:56:08 2013] Updating aperture counts using extracted products
[Sun May 19 09:56:08 2013] Total counts from fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2_src.pi.gz = 311.00
[Sun May 19 09:56:08 2013] Total counts from fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2_bgd.pi.gz = 1963.00
[Sun May 19 09:56:08 2013] Got source and background scale factors 0.000012, 0.000224
[Sun May 19 09:56:08 2013] User source parameters:
  Position = (949.8, 762.4) = 12 59 16.72 27 53 45.6
  Extent = 2.5 (2.0-3.1)" x 1.5 (1.3-1.9)", rotation angle = 130 (113-146) degrees
  Source aperture counts = 207.5 +/- 18.7
  Background aperture counts = 103.5
  Rate = 0.005 +/- 0.0005

[Sun May 19 09:56:08 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 09:56:08 2013] Using photon index=1.80, rate=0.0049, arf fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2.arf
[Sun May 19 09:56:08 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 19 09:56:08 2013] Updating source flux to 8.9e-14
[Sun May 19 09:56:26 2013] Reading fit data from acisf13993/analysis//spectral/fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2_pl.csv
[Sun May 19 09:56:26 2013] Spectral fit parameter nH value = 3.2567e+21
[Sun May 19 09:56:26 2013] Spectral fit parameter PhoIndex value = 2.31629
[Sun May 19 09:56:26 2013] Failed to get F(0.3-8.0) from acisf13993/analysis//spectral/fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun May 19 09:56:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 09:56:26 2013] Using Nh = 3.3e+21, photon index=2.32, rate=0.0049, arf fullrun_ccd2_acisf13993_pi14-548_pass1_cl_src2.arf
[Sun May 19 09:56:26 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 19 09:56:26 2013] Updating source flux to 7e-14