[Fri May 17 17:37:27 2013] Detection parameters:
  Position = (781.9, 583.1) = 3 17 25.81 42 24 52.2
  Extent = 0.9" x 0.7", rotation angle = 80 degrees
  Source counts = 33.3 +/- 5.9
  Background counts = 1.7
  Rate = 0.0009 +/- 0.0002

[Fri May 17 17:37:28 2013] Off-axis axis estimate = 5.53'
[Fri May 17 17:50:09 2013] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Fri May 17 17:50:09 2013] Initial guess for spatial extent in simple fitting = 1.41"
[Fri May 17 17:50:09 2013] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.797
[Fri May 17 17:50:09 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 1.41"
[Fri May 17 18:10:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass0_src4.ximg exists
[Fri May 17 18:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13990_pi14-548_cl_pass0_src4.csv
[Fri May 17 18:10:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass0_src4_1.ximg exists
[Fri May 17 18:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13990_pi14-548_cl_pass0_src4.csv
[Fri May 17 18:10:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13990_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13990_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:10:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri May 17 18:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13990_pi14-548_cl_pass0_tfrozen_src4.csv
[Fri May 17 18:10:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 17 18:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13990_pi14-548_cl_pass0_tfrozen_src4.csv
[Fri May 17 18:10:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13990_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13990_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:48:28 2013] Spatial fit model total counts = 34.632900, observed total counts = 38.000000
[Fri May 17 18:48:28 2013] Offset between fit and detection position for source 3 = 0.398218 pixels
[Fri May 17 18:48:28 2013] 35.540227 total counts/ 0.335627 bgd. counts: snr = 60.767444
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.398218 pixels
  Position = (782.3, 583.2) = 3 17 25.82 42 24 51.9
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 35.2 +/- 6.0
  Background counts = 0.3
  Rate = 0.001 +/- 0.0002
[Fri May 17 18:48:28 2013] Vigneting correction estimate = 1.000000
[Fri May 17 18:48:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 18:48:28 2013] Assessing source extent using major axis lower bound
[Fri May 17 18:48:28 2013] Source does appear to be extended
[Fri May 17 18:48:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 18:58:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 18:58:14 2013] Initial guess for spatial extent in simple fitting = 1.05"
[Fri May 17 18:58:14 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.897
[Fri May 17 18:58:14 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 1.05"
[Fri May 17 19:18:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass1_src4.ximg exists
[Fri May 17 19:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13990_pi14-548_cl_pass1_src4.csv
[Fri May 17 19:18:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass1_src4_1.ximg exists
[Fri May 17 19:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13990_pi14-548_cl_pass1_src4.csv
[Fri May 17 19:18:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13990_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13990_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 19:18:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri May 17 19:18:21 2013] fullrun_ccd1_acisf13990_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 17 19:18:21 2013] Fit fullrun_ccd1_acisf13990_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri May 17 19:57:13 2013] Spatial fit model total counts = 35.848500, observed total counts = 38.000000
[Fri May 17 19:57:13 2013] Offset between fit and detection position for source 3 = 0.052775 pixels
[Fri May 17 19:57:13 2013] 36.579140 total counts/ 1.318640 bgd. counts: snr = 30.706148
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.052775 pixels
  Position = (782.3, 583.1) = 3 17 25.82 42 24 51.9
  Extent = 1.1 (0.8-1.2)", rotation angle = 0
  Source counts = 35.3 +/- 6.0
  Background counts = 1.3
  Rate = 0.001 +/- 0.0002
[Fri May 17 19:57:13 2013] Vigneting correction estimate = 1.000000
[Fri May 17 19:57:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 19:57:13 2013] Assessing source extent using major axis lower bound
[Fri May 17 19:57:13 2013] Source does appear to be extended
[Fri May 17 19:57:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 20:06:14 2013] Writing source region out to fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3_src.reg
[Fri May 17 20:06:14 2013] Extracting stamp from image fullrun_ccd1_acisf13990_pi14-548_cl_sm2.00.img.gz, (734, 535) - (831, 631)
[Fri May 17 20:06:14 2013] Writing fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3.gif
[Fri May 17 20:07:48 2013] Size of ../../acisf13990/products/events/fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3_src.evt.gz[events] = 37 counts
[Fri May 17 20:07:48 2013] Mean chipx,y = (533.05, 750.46)
[Fri May 17 20:07:48 2013] Mean tdetx,y = (4381.54, 4640.05)
[Fri May 17 20:07:48 2013] chipx,y range = (508.00-554.00, 730.00-768.00)
[Fri May 17 20:07:48 2013] Size of ../../acisf13990/products/events/fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 23 counts
[Fri May 17 20:07:49 2013] Not generating rmf since there are only 35 counts
[Fri May 17 20:07:49 2013] arf not found, will run specextract
[Fri May 17 20:08:14 2013] ../../acisf13990/products/spectra/fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3.warf not found
[Fri May 17 20:08:14 2013] ../../acisf13990/products/spectra/fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3.wrmf not found
[Fri May 17 20:08:14 2013] Removal of ../../acisf13990/products/spectra/fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3.soff failed
[Fri May 17 20:18:55 2013] Spectrum 3 has only 35 counts, deleting rmf
[Fri May 17 20:18:55 2013] 168.349
[Fri May 17 20:41:22 2013] Updating aperture counts using extracted products
[Fri May 17 20:41:22 2013] Total counts from fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3_src.pi.gz = 37.00
[Fri May 17 20:41:22 2013] Total counts from fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3_bgd.pi.gz = 23.00
[Fri May 17 20:41:22 2013] Got source and background scale factors 0.000003, 0.000041
[Fri May 17 20:41:22 2013] User source parameters:
  Position = (782.3, 583.1) = 3 17 25.82 42 24 51.9
  Extent = 1.1 (0.8-1.2)", rotation angle = 0
  Source aperture counts = 35.1 +/- 7.1
  Background aperture counts = 1.9
  Rate = 0.0009 +/- 0.0002

[Fri May 17 20:41:25 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 20:41:25 2013] Using photon index=1.80, rate=0.000952, arf fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3.arf
[Fri May 17 20:41:25 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 17 20:41:25 2013] Updating source flux to 1.3e-14
[Fri May 17 20:41:35 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 17 20:41:36 2013] acisf13990/analysis//spectral/fullrun_ccd1_acisf13990_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete