[Wed May  8 00:50:43 2013] Detection parameters:
  Position = (117.3, 716.7) = 3 17 6.07 42 17 57.6
  Extent = 0.5" x 0.5", rotation angle = 107 degrees
  Source counts = 13.3 +/- 3.7
  Background counts = 0.7
  Rate = 0.0003 +/- 0.0001

[Wed May  8 00:50:43 2013] Off-axis axis estimate = 2.04'
[Wed May  8 01:35:00 2013] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Wed May  8 01:35:00 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Wed May  8 01:35:00 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.176
[Wed May  8 01:35:00 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 0.43"
[Wed May  8 01:54:53 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass0_src11.ximg exists
[Wed May  8 01:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13989_pi14-548_cl_pass0_src11.csv
[Wed May  8 01:54:53 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass0_src11_1.ximg exists
[Wed May  8 01:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13989_pi14-548_cl_pass0_src11.csv
[Wed May  8 01:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13989_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13989_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:54:53 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed May  8 01:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13989_pi14-548_cl_pass0_tfrozen_src11.csv
[Wed May  8 01:54:53 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May  8 01:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13989_pi14-548_cl_pass0_tfrozen_src11.csv
[Wed May  8 01:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13989_pi14-548_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13989_pi14-548_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 02:09:31 2013] Spatial fit model total counts = 13.894200, observed total counts = 15.000000
[Wed May  8 02:09:31 2013] Offset between fit and detection position for source 3 = 0.715635 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.715635 pixels
  Position = (117.8, 717.2) = 3 17 6.07 42 17 57.6
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.3-0.6)", rotation angle = 72 (90-90) degrees
  Source counts = 14.0 +/- 3.7
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed May  8 02:09:31 2013] Vigneting correction estimate = 1.000000
[Wed May  8 02:09:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 02:09:31 2013] Assessing source extent using major axis lower bound
[Wed May  8 02:09:31 2013] Source does appear to be extended
[Wed May  8 02:09:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Wed May  8 02:49:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  8 02:49:19 2013] Initial guess for spatial extent in simple fitting = 0.54"
[Wed May  8 02:49:19 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.888
[Wed May  8 02:49:19 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 0.54"
[Wed May  8 03:06:05 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass1_src11.ximg exists
[Wed May  8 03:06:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13989_pi14-548_cl_pass1_src11.csv
[Wed May  8 03:06:05 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass1_src11_1.ximg exists
[Wed May  8 03:06:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13989_pi14-548_cl_pass1_src11.csv
[Wed May  8 03:06:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13989_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13989_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 03:06:05 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed May  8 03:06:05 2013] fullrun_ccd2_acisf13989_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May  8 03:06:05 2013] Fit fullrun_ccd2_acisf13989_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed May  8 03:19:09 2013] Spatial fit model total counts = 13.756100, observed total counts = 15.000000
[Wed May  8 03:19:09 2013] Offset between fit and detection position for source 3 = 0.009468 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.009468 pixels
  Position = (117.8, 717.2) = 3 17 6.07 42 17 57.6
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.3-0.6)", rotation angle = 69 (44-98) degrees
  Source counts = 13.8 +/- 3.7
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Wed May  8 03:19:09 2013] Vigneting correction estimate = 1.000000
[Wed May  8 03:19:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 03:19:09 2013] Assessing source extent using major axis lower bound
[Wed May  8 03:19:09 2013] Source does appear to be extended
[Wed May  8 03:19:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.87
[Wed May  8 03:38:43 2013] Writing source region out to fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3_src.reg
[Wed May  8 03:38:43 2013] Extracting stamp from image fullrun_ccd2_acisf13989_pi14-548_cl_sm2.00.img.gz, (85, 685) - (150, 750)
[Wed May  8 03:38:43 2013] Writing fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3.gif
[Wed May  8 03:44:43 2013] Size of ../../acisf13989/products/events/fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3_src.evt.gz[events] = 14 counts
[Wed May  8 03:44:43 2013] Mean chipx,y = (305.50, 967.29)
[Wed May  8 03:44:43 2013] Mean tdetx,y = (4028.29, 3780.50)
[Wed May  8 03:44:43 2013] chipx,y range = (286.00-320.00, 954.00-987.00)
[Wed May  8 03:44:43 2013] Size of ../../acisf13989/products/events/fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Wed May  8 03:44:44 2013] Not generating rmf since there are only 13 counts
[Wed May  8 03:44:44 2013] arf not found, will run specextract
[Wed May  8 03:45:15 2013] ../../acisf13989/products/spectra/fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3.warf not found
[Wed May  8 03:45:15 2013] ../../acisf13989/products/spectra/fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3.wrmf not found
[Wed May  8 03:45:15 2013] Removal of ../../acisf13989/products/spectra/fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3.soff failed
[Wed May  8 03:48:21 2013] Spectrum 3 has only 14 counts, deleting rmf
[Wed May  8 03:48:21 2013] 195.495
[Wed May  8 03:58:06 2013] Updating aperture counts using extracted products
[Wed May  8 03:58:06 2013] Total counts from fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3_src.pi.gz = 14.00
[Wed May  8 03:58:06 2013] Total counts from fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3_bgd.pi.gz = 15.00
[Wed May  8 03:58:06 2013] Got source and background scale factors 0.000001, 0.000019
[Wed May  8 03:58:06 2013] User source parameters:
  Position = (117.8, 717.2) = 3 17 6.07 42 17 57.6
  Extent = 0.7 (0.5-1.1)" x 0.4 (0.3-0.6)", rotation angle = 69 (44-98) degrees
  Source aperture counts = 13.3 +/- 4.8
  Background aperture counts = 0.7
  Rate = 0.0003 +/- 0.0001

[Wed May  8 03:58:07 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 03:58:07 2013] Using photon index=1.80, rate=0.000362, arf fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3.arf
[Wed May  8 03:58:07 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  8 03:58:07 2013] Updating source flux to 4.1e-15
[Wed May  8 03:58:14 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  8 03:58:15 2013] acisf13989/analysis//spectral/fullrun_ccd2_acisf13989_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete