[Fri May  3 17:19:11 2013] Detection parameters:
  Position = (1068.9, 684.5) = 14 33 57.34 5 35 1.4
  Extent = 0.8" x 0.5", rotation angle = 141 degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.3
  Rate = 0.003 +/- 0.0007

[Fri May  3 17:19:12 2013] Off-axis axis estimate = 5.93'
[Fri May  3 17:21:14 2013] Using EEF radius (= 1.60 ")to estimate initial spatial extent for simple fitting
[Fri May  3 17:21:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 17:21:14 2013] Initial guess for spatial extent in simple fitting = 1.60"
[Fri May  3 17:21:14 2013] source mask rpix=3.2, npix_max = 56, mask sum = 56, frac = 0.998
[Fri May  3 17:21:14 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.60"
[Fri May  3 17:24:36 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass0_src1.ximg exists
[Fri May  3 17:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13980_pi14-548_cl_pass0_src1.csv
[Fri May  3 17:24:36 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass0_src1_1.ximg exists
[Fri May  3 17:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13980_pi14-548_cl_pass0_src1.csv
[Fri May  3 17:24:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13980_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13980_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 17:24:36 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri May  3 17:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13980_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May  3 17:24:36 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  3 17:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13980_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May  3 17:24:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13980_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13980_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 17:36:46 2013] Spatial fit model total counts = 20.691500, observed total counts = 23.000000
[Fri May  3 17:36:46 2013] Offset between fit and detection position for source 1 = 2.385895 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.385895 pixels
  Position = (1070.8, 683.0) = 14 33 57.30 5 35 0.4
  Extent = 2.0 (1.5-2.9)" x 0.5 (0.4-0.6)", rotation angle = 54 (46-61) degrees
  Source counts = 21.1 +/- 4.6
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Fri May  3 17:36:46 2013] Vigneting correction estimate = 1.000000
[Fri May  3 17:36:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 17:36:46 2013] Assessing source extent using major axis lower bound
[Fri May  3 17:36:46 2013] Source does appear to be extended
[Fri May  3 17:36:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.38
[Fri May  3 17:36:46 2013] Source is asymmetric
[Fri May  3 17:36:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 17:36:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 17:36:54 2013] Initial guess for spatial extent in simple fitting = 1.24"
[Fri May  3 17:36:54 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Fri May  3 17:36:54 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.24"
[Fri May  3 17:38:41 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass1_src1.ximg exists
[Fri May  3 17:38:41 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass1_src1_1.ximg exists
[Fri May  3 17:38:41 2013] Fit fullrun_ccd0_acisf13980_pi14-548_cl_pass1_src1 appears to have run properly
[Fri May  3 17:38:41 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri May  3 17:38:41 2013] fullrun_ccd0_acisf13980_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  3 17:38:41 2013] Fit fullrun_ccd0_acisf13980_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May  3 17:53:21 2013] Spatial fit model total counts = 21.002400, observed total counts = 23.000000
[Fri May  3 17:53:21 2013] Offset between fit and detection position for source 1 = 0.373870 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.373870 pixels
  Position = (1071.0, 682.7) = 14 33 57.29 5 35 0.2
  Extent = 2.1 (1.5-2.5)" x 0.5 (0.4-0.7)", rotation angle = 54 (46-61) degrees
  Source counts = 21.5 +/- 4.6
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Fri May  3 17:53:21 2013] Vigneting correction estimate = 1.000000
[Fri May  3 17:53:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 17:53:21 2013] Assessing source extent using major axis lower bound
[Fri May  3 17:53:21 2013] Source does appear to be extended
[Fri May  3 17:53:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.31
[Fri May  3 17:53:21 2013] Source is asymmetric
[Fri May  3 17:53:30 2013] Writing source region out to fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1_src.reg
[Fri May  3 17:53:30 2013] Extracting stamp from image fullrun_ccd0_acisf13980_pi14-548_cl_sm2.00.img.gz, (975, 586) - (1139, 779)
[Fri May  3 17:53:30 2013] Writing fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1.gif
[Fri May  3 17:53:31 2013] Size of ../../acisf13980/products/events/fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1_src.evt.gz[events] = 14 counts
[Fri May  3 17:53:31 2013] Mean chipx,y = (997.43, 327.71)
[Fri May  3 17:53:31 2013] Mean tdetx,y = (3388.71, 4134.57)
[Fri May  3 17:53:31 2013] chipx,y range = (986.00-1021.00, 312.00-343.00)
[Fri May  3 17:53:31 2013] Size of ../../acisf13980/products/events/fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 10 counts
[Fri May  3 17:53:32 2013] Not generating rmf since there are only 21 counts
[Fri May  3 17:53:32 2013] arf not found, will run specextract
[Fri May  3 17:53:55 2013] ../../acisf13980/products/spectra/fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1.warf not found
[Fri May  3 17:53:55 2013] ../../acisf13980/products/spectra/fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1.wrmf not found
[Fri May  3 17:53:55 2013] Removal of ../../acisf13980/products/spectra/fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1.soff failed
[Fri May  3 17:54:47 2013] Spectrum 1 has only 22 counts, deleting rmf
[Fri May  3 17:54:47 2013] 151.724
[Fri May  3 17:57:32 2013] Updating aperture counts using extracted products
[Fri May  3 17:57:32 2013] Total counts from fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1_src.pi.gz = 14.00
[Fri May  3 17:57:32 2013] Total counts from fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1_bgd.pi.gz = 10.00
[Fri May  3 17:57:32 2013] Got source and background scale factors 0.000003, 0.000162
[Fri May  3 17:57:32 2013] User source parameters:
  Position = (1071.0, 682.7) = 14 33 57.29 5 35 0.2
  Extent = 2.1 (1.5-2.5)" x 0.5 (0.4-0.7)", rotation angle = 54 (46-61) degrees
  Source aperture counts = 13.8 +/- 4.8
  Background aperture counts = 0.2
  Rate = 0.003 +/- 0.001

[Fri May  3 17:57:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 17:57:32 2013] Using photon index=1.80, rate=0.00429, arf fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1.arf
[Fri May  3 17:57:32 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 17:57:32 2013] Updating source flux to 6.7e-14
[Fri May  3 17:57:33 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 17:57:34 2013] acisf13980/analysis//spectral/fullrun_ccd0_acisf13980_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete