[Mon Jun 10 01:42:28 2013] Detection parameters:
  Position = (749.2, 923.6) = 12 50 49.74 -11 44 12.0
  Extent = 1.4" x 0.9", rotation angle = 122 degrees
  Source counts = 12.4 +/- 3.6
  Background counts = 0.6
  Rate = 0.002 +/- 0.0007

[Mon Jun 10 01:42:28 2013] Off-axis axis estimate = 7.14'
[Mon Jun 10 01:44:52 2013] Using EEF radius (= 2.26 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 01:44:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 01:44:52 2013] Initial guess for spatial extent in simple fitting = 2.26"
[Mon Jun 10 01:44:52 2013] source mask rpix=4.6, npix_max = 103, mask sum = 110, frac = 1.058
[Mon Jun 10 01:44:52 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 2.26"
[Mon Jun 10 01:49:10 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass0_src1.ximg exists
[Mon Jun 10 01:49:10 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Jun 10 01:49:10 2013] Fit fullrun_ccd0_acisf13979_pi14-548_cl_pass0_src1 appears to have run properly
[Mon Jun 10 01:49:10 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 10 01:49:10 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 10 01:49:10 2013] Fit fullrun_ccd0_acisf13979_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 10 01:52:56 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 27.155597 pixels away
[Mon Jun 10 01:52:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 01:52:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 01:52:56 2013] Assessing source extent using major
[Mon Jun 10 01:52:56 2013] Source does appear to be extended
[Mon Jun 10 01:52:56 2013] Computing asymmetry using major and minor axis, asym = 1.65
[Mon Jun 10 01:52:56 2013] Source is asymmetric
[Mon Jun 10 01:53:05 2013] Using EEF radius (= 2.26 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 01:53:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 01:53:05 2013] Initial guess for spatial extent in simple fitting = 2.26"
[Mon Jun 10 01:53:05 2013] source mask rpix=4.6, npix_max = 103, mask sum = 110, frac = 1.058
[Mon Jun 10 01:53:05 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 2.26"
[Mon Jun 10 01:58:52 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass1_src1.ximg exists
[Mon Jun 10 01:58:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13979_pi14-548_cl_pass1_src1.csv
[Mon Jun 10 01:58:52 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Jun 10 01:58:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13979_pi14-548_cl_pass1_src1.csv
[Mon Jun 10 01:58:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13979_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13979_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 01:58:52 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 10 01:58:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13979_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 01:58:52 2013] fullrun_ccd0_acisf13979_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 10 01:58:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13979_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 01:58:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13979_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13979_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 02:03:15 2013] Spatial fit model total counts = 14.972400, observed total counts = 18.000000
[Mon Jun 10 02:03:15 2013] Offset between fit and detection position for source 1 = 1.324644 pixels
[Mon Jun 10 02:03:15 2013] 14.972600 total counts/ 0.000000 bgd. counts: snr = 64004233664806.031250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.324644 pixels
  Position = (747.9, 923.5) = 12 50 49.80 -11 44 12.3
  Extent = 2.1 (1.7-2.6)", rotation angle = 0
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Mon Jun 10 02:03:15 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 02:03:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 02:03:15 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 02:03:15 2013] Source does appear to be extended
[Mon Jun 10 02:03:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 02:03:24 2013] Writing source region out to fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1_src.reg
[Mon Jun 10 02:03:24 2013] Extracting stamp from image fullrun_ccd0_acisf13979_pi14-548_cl_sm2.00.img.gz, (651, 826) - (845, 1021)
[Mon Jun 10 02:03:24 2013] Writing fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1.gif
[Mon Jun 10 02:03:25 2013] Size of ../../acisf13979/products/events/fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1_src.evt.gz[events] = 18 counts
[Mon Jun 10 02:03:25 2013] Mean chipx,y = (292.22, 748.94)
[Mon Jun 10 02:03:25 2013] Mean tdetx,y = (3809.94, 4839.78)
[Mon Jun 10 02:03:25 2013] chipx,y range = (275.00-316.00, 732.00-768.00)
[Mon Jun 10 02:03:25 2013] Size of ../../acisf13979/products/events/fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 11 counts
[Mon Jun 10 02:03:26 2013] Not generating rmf since there are only 14 counts
[Mon Jun 10 02:03:26 2013] arf not found, will run specextract
[Mon Jun 10 02:03:57 2013] ../../acisf13979/products/spectra/fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1.warf not found
[Mon Jun 10 02:03:57 2013] ../../acisf13979/products/spectra/fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1.wrmf not found
[Mon Jun 10 02:03:57 2013] Removal of ../../acisf13979/products/spectra/fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1.soff failed
[Mon Jun 10 02:05:59 2013] Spectrum 1 has only 15 counts, deleting rmf
[Mon Jun 10 02:05:59 2013] 161.12
[Mon Jun 10 02:11:45 2013] Updating aperture counts using extracted products
[Mon Jun 10 02:11:45 2013] Total counts from fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1_src.pi.gz = 18.00
[Mon Jun 10 02:11:45 2013] Total counts from fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1_bgd.pi.gz = 11.00
[Mon Jun 10 02:11:45 2013] Got source and background scale factors 0.000014, 0.000165
[Mon Jun 10 02:11:45 2013] User source parameters:
  Position = (747.9, 923.5) = 12 50 49.80 -11 44 12.3
  Extent = 2.1 (1.7-2.6)", rotation angle = 0
  Source aperture counts = 17.1 +/- 5.3
  Background aperture counts = 0.9
  Rate = 0.003 +/- 0.001

[Mon Jun 10 02:11:45 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 02:11:45 2013] Using photon index=1.80, rate=0.00298, arf fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1.arf
[Mon Jun 10 02:11:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun 10 02:11:45 2013] Updating source flux to 4.3e-14
[Mon Jun 10 02:11:48 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 02:11:49 2013] acisf13979/analysis//spectral/fullrun_ccd0_acisf13979_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete