[Fri Aug 14 07:53:55 2015] Detection parameters:
  Position = (526.2, 381.8) = 12 10 55.00 51 12 13.8
  Extent = 0.5" x 0.5", rotation angle = 63 degrees
  Source counts = 11.7 +/- 3.5
  Background counts = 0.3
  Rate = 0.0008 +/- 0.0002

[Fri Aug 14 07:53:56 2015] Off-axis axis estimate = 0.74'
[Fri Aug 14 07:59:53 2015] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 07:59:53 2015] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Aug 14 07:59:53 2015] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.917
[Fri Aug 14 07:59:53 2015] Giving source the simple spatial ID 9 for pass 0, mean size = 0.38"
[Fri Aug 14 08:10:13 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass0_src9.ximg exists
[Fri Aug 14 08:10:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13936_pi14-548_cl_pass0_src9.csv
[Fri Aug 14 08:10:13 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Aug 14 08:10:13 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13936_pi14-548_cl_pass0_src9.csv
[Fri Aug 14 08:10:13 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13936_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13936_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:10:13 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 14 08:10:13 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 14 08:10:13 2015] Fit fullrun_ccd7_acisf13936_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Aug 14 08:10:16 2015] Spatial fit model total counts = 11.054900, observed total counts = 13.000000
[Fri Aug 14 08:10:16 2015] Offset between fit and detection position for source 8 = 0.591473 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.591473 pixels
  Position = (526.7, 382.2) = 12 10 55.01 51 12 13.8
  Extent = 0.4 (0.3-0.7)" x 0.2 (0.2-0.4)", rotation angle = 60 (215-272) degrees
  Source counts = 11.1 +/- 3.3
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Aug 14 08:10:16 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:10:16 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:10:16 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:10:16 2015] Source does appear to be extended
[Fri Aug 14 08:10:16 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.87
[Fri Aug 14 08:15:05 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 08:15:05 2015] Initial guess for spatial extent in simple fitting = 0.34"
[Fri Aug 14 08:15:05 2015] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.053
[Fri Aug 14 08:15:05 2015] Giving source the simple spatial ID 9 for pass 1, mean size = 0.34"
[Fri Aug 14 08:23:21 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass1_src9.ximg exists
[Fri Aug 14 08:23:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13936_pi14-548_cl_pass1_src9.csv
[Fri Aug 14 08:23:21 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Aug 14 08:23:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13936_pi14-548_cl_pass1_src9.csv
[Fri Aug 14 08:23:21 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13936_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13936_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:23:21 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 14 08:23:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13936_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Aug 14 08:23:21 2015] fullrun_ccd7_acisf13936_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 14 08:23:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13936_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Aug 14 08:23:21 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13936_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13936_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:23:24 2015] Spatial fit model total counts = 11.452000, observed total counts = 13.000000
[Fri Aug 14 08:23:24 2015] Offset between fit and detection position for source 8 = 0.110598 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.110598 pixels
  Position = (526.7, 382.3) = 12 10 55.00 51 12 13.8
  Extent = 0.4 (0.3-0.7)" x 0.2 (0.2-0.4)", rotation angle = 66 (35-97) degrees
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Aug 14 08:23:24 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:23:24 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:23:24 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:23:24 2015] Source does appear to be extended
[Fri Aug 14 08:23:24 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.83