[Wed May  1 21:33:38 2013] Detection parameters:
  Position = (796.6, 372.8) = 14 50 34.18 35 33 6.8
  Extent = 0.9" x 0.7", rotation angle = 121 degrees
  Source counts = 225.4 +/- 15.3
  Background counts = 7.6
  Rate = 0.007 +/- 0.0005

[Wed May  1 21:33:38 2013] Off-axis axis estimate = 4.83'
[Wed May  1 22:00:38 2013] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Wed May  1 22:00:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 22:00:38 2013] Initial guess for spatial extent in simple fitting = 1.11"
[Wed May  1 22:00:38 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.984
[Wed May  1 22:00:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.11"
[Wed May  1 22:22:31 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass0_src1.ximg exists
[Wed May  1 22:22:31 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass0_src1_1.ximg exists
[Wed May  1 22:22:31 2013] Fit fullrun_ccd7_acisf13930_pi14-548_cl_pass0_src1 appears to have run properly
[Wed May  1 22:22:31 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed May  1 22:22:31 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  1 22:22:31 2013] Fit fullrun_ccd7_acisf13930_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  1 22:22:37 2013] Spatial fit model total counts = 245.606000, observed total counts = 238.000000
[Wed May  1 22:22:37 2013] Offset between fit and detection position for source 2 = 0.763292 pixels
[Wed May  1 22:22:37 2013] 249.194700 total counts/ 59.255700 bgd. counts: snr = 24.674541
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.763292 pixels
  Position = (797.0, 373.5) = 14 50 34.19 35 33 6.9
  Extent = 1.4 (1.2-1.6)" x 0.7 (0.5-0.8)", rotation angle = 62 (54-70) degrees
  Source counts = 189.9 +/- 15.8
  Background counts = 59.3
  Rate = 0.006 +/- 0.0005
[Wed May  1 22:22:37 2013] Vigneting correction estimate = 1.000000
[Wed May  1 22:22:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 22:22:37 2013] Assessing source extent using major axis lower bound
[Wed May  1 22:22:37 2013] Source does appear to be extended
[Wed May  1 22:22:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Wed May  1 22:49:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 22:49:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 22:49:39 2013] Initial guess for spatial extent in simple fitting = 1.01"
[Wed May  1 22:49:39 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.145
[Wed May  1 22:49:39 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.01"
[Wed May  1 23:10:21 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass1_src1.ximg exists
[Wed May  1 23:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13930_pi14-548_cl_pass1_src1.csv
[Wed May  1 23:10:21 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass1_src1_1.ximg exists
[Wed May  1 23:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13930_pi14-548_cl_pass1_src1.csv
[Wed May  1 23:10:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13930_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13930_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 23:10:21 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed May  1 23:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13930_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed May  1 23:10:21 2013] fullrun_ccd7_acisf13930_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  1 23:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13930_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed May  1 23:10:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13930_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13930_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 23:10:27 2013] Warning, spatial fit 1 centroid is now closest to src. 22
[Wed May  1 23:10:27 2013] Vigneting correction estimate = 1.000000
[Wed May  1 23:10:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 23:10:27 2013] Assessing source extent using major axis lower bound
[Wed May  1 23:10:27 2013] Source does appear to be extended
[Wed May  1 23:10:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Wed May  1 23:17:46 2013] Writing source region out to fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2_src.reg
[Wed May  1 23:17:46 2013] Extracting stamp from image fullrun_ccd7_acisf13930_pi14-548_cl_sm2.00.img.gz, (735, 311) - (859, 436)
[Wed May  1 23:17:46 2013] Writing fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2.gif
[Wed May  1 23:17:48 2013] Size of ../../acisf13930/products/events/fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2_src.evt.gz[events] = 221 counts
[Wed May  1 23:17:48 2013] Mean chipx,y = (762.29, 688.01)
[Wed May  1 23:17:48 2013] Mean tdetx,y = (4679.29, 2390.01)
[Wed May  1 23:17:48 2013] chipx,y range = (742.00-781.00, 666.00-710.00)
[Wed May  1 23:17:48 2013] Size of ../../acisf13930/products/events/fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 74 counts
[Wed May  1 23:17:49 2013] rmf not found, will run specextract
[Wed May  1 23:17:49 2013] arf not found, will run specextract
[Wed May  1 23:17:57 2013] ../../acisf13930/products/spectra/fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2.warf not found
[Wed May  1 23:17:57 2013] ../../acisf13930/products/spectra/fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2.wrmf not found
[Wed May  1 23:17:57 2013] Removal of ../../acisf13930/products/spectra/fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2.soff failed
[Wed May  1 23:25:55 2013] Keeping rmf generated by specextract
[Wed May  1 23:25:55 2013] 210.706
[Wed May  1 23:26:00 2013] Updating aperture counts using extracted products
[Wed May  1 23:26:00 2013] Total counts from fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2_src.pi.gz = 221.00
[Wed May  1 23:26:00 2013] Total counts from fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2_bgd.pi.gz = 74.00
[Wed May  1 23:26:00 2013] Got source and background scale factors 0.000003, 0.000064
[Wed May  1 23:26:00 2013] User source parameters:
  Position = (797.0, 373.5) = 14 50 34.19 35 33 6.9
  Extent = 1.4 (1.2-1.6)" x 0.7 (0.5-0.8)", rotation angle = 62 (54-70) degrees
  Source aperture counts = 217.8 +/- 15.9
  Background aperture counts = 3.2
  Rate = 0.007 +/- 0.0005

[Wed May  1 23:26:03 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 23:26:03 2013] Using photon index=1.80, rate=0.0062, arf fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2.arf
[Wed May  1 23:26:03 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 23:26:03 2013] Updating source flux to 5.1e-14
[Wed May  1 23:26:19 2013] Reading fit data from acisf13930/analysis//spectral/fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2_pl.csv
[Wed May  1 23:26:19 2013] Spectral fit parameter nH value = 3.5978e+12
[Wed May  1 23:26:19 2013] Spectral fit parameter PhoIndex value = 1.57717
[Wed May  1 23:26:19 2013] Failed to get F(0.3-8.0) from acisf13930/analysis//spectral/fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed May  1 23:26:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 23:26:19 2013] Using Nh = 3.6e+12, photon index=1.58, rate=0.0062, arf fullrun_ccd7_acisf13930_pi14-548_pass1_cl_src2.arf
[Wed May  1 23:26:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 23:26:19 2013] Updating source flux to 5.6e-14