[Thu Aug 13 13:52:55 2015] Detection parameters:
  Position = (834.9, 541.4) = 0 42 4.99 -12 58 45.5
  Extent = 0.7" x 0.5", rotation angle = 84 degrees
  Source counts = 13.3 +/- 3.7
  Background counts = 0.7
  Rate = 0.0009 +/- 0.0003

[Thu Aug 13 13:52:55 2015] Off-axis axis estimate = 3.71'
[Thu Aug 13 13:58:36 2015] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Thu Aug 13 13:58:36 2015] Initial guess for spatial extent in simple fitting = 0.75"
[Thu Aug 13 13:58:36 2015] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Thu Aug 13 13:58:36 2015] Giving source the simple spatial ID 10 for pass 0, mean size = 0.75"
[Thu Aug 13 14:05:42 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass0_src10.ximg exists
[Thu Aug 13 14:05:42 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Aug 13 14:05:42 2015] Fit fullrun_ccd7_acisf13925_pi14-548_cl_pass0_src10 appears to have run properly
[Thu Aug 13 14:05:42 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Aug 13 14:05:42 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Aug 13 14:05:42 2015] Fit fullrun_ccd7_acisf13925_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Aug 13 14:05:45 2015] Spatial fit model total counts = 17.421700, observed total counts = 18.000000
[Thu Aug 13 14:05:45 2015] Offset between fit and detection position for source 13 = 1.000123 pixels
[Thu Aug 13 14:05:45 2015] 16.990500 total counts/ 4.617500 bgd. counts: snr = 5.757999
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.000123 pixels
  Position = (835.4, 542.2) = 0 42 4.99 -12 58 45.4
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 12.4 +/- 4.1
  Background counts = 4.6
  Rate = 0.0008 +/- 0.0003
[Thu Aug 13 14:05:45 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 14:05:45 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 14:05:45 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 14:05:45 2015] Source does appear to be extended
[Thu Aug 13 14:05:45 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 14:09:22 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 13 14:09:22 2015] Initial guess for spatial extent in simple fitting = 0.73"
[Thu Aug 13 14:09:22 2015] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.011
[Thu Aug 13 14:09:22 2015] Giving source the simple spatial ID 10 for pass 1, mean size = 0.73"
[Thu Aug 13 14:17:21 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass1_src10.ximg exists
[Thu Aug 13 14:17:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13925_pi14-548_cl_pass1_src10.csv
[Thu Aug 13 14:17:21 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Aug 13 14:17:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13925_pi14-548_cl_pass1_src10.csv
[Thu Aug 13 14:17:21 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13925_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13925_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 14:17:21 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Aug 13 14:17:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13925_pi14-548_cl_pass1_tfrozen_src10.csv
[Thu Aug 13 14:17:21 2015] fullrun_ccd7_acisf13925_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Aug 13 14:17:21 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13925_pi14-548_cl_pass1_tfrozen_src10.csv
[Thu Aug 13 14:17:21 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13925_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13925_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 14:17:24 2015] Spatial fit model total counts = 15.257800, observed total counts = 18.000000
[Thu Aug 13 14:17:24 2015] Offset between fit and detection position for source 13 = 0.116259 pixels
[Thu Aug 13 14:17:24 2015] 14.580070 total counts/ 2.310570 bgd. counts: snr = 8.071743
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.116259 pixels
  Position = (835.4, 542.3) = 0 42 4.99 -12 58 45.3
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 12.3 +/- 3.8
  Background counts = 2.3
  Rate = 0.0008 +/- 0.0003
[Thu Aug 13 14:17:24 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 14:17:24 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 14:17:24 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 14:17:24 2015] Source does appear to be extended
[Thu Aug 13 14:17:24 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 14:23:45 2015] Writing source region out to fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13_src.reg
[Thu Aug 13 14:23:45 2015] Extracting stamp from image fullrun_ccd7_acisf13925_pi14-548_cl_sm2.00.img.gz, (802, 509) - (869, 576)
[Thu Aug 13 14:23:45 2015] Writing fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13.gif
[Thu Aug 13 14:26:59 2015] Size of ../../acisf13925/products/events/fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13_src.evt.gz[events] = 15 counts
[Thu Aug 13 14:26:59 2015] Mean chipx,y = (549.27, 234.27)
[Thu Aug 13 14:26:59 2015] Mean tdetx,y = (4466.27, 1936.27)
[Thu Aug 13 14:26:59 2015] chipx,y range = (532.00-565.00, 207.00-246.00)
[Thu Aug 13 14:26:59 2015] Size of ../../acisf13925/products/events/fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 6 counts
[Thu Aug 13 14:27:00 2015] Not generating rmf since there are only 12 counts
[Thu Aug 13 14:27:00 2015] arf not found, will run specextract
[Thu Aug 13 14:27:13 2015] ../../acisf13925/products/spectra/fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13.warf not found
[Thu Aug 13 14:27:13 2015] ../../acisf13925/products/spectra/fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13.wrmf not found
[Thu Aug 13 14:27:13 2015] Removal of ../../acisf13925/products/spectra/fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13.soff failed
[Thu Aug 13 14:29:50 2015] Spectrum 13 has only 12 counts, deleting rmf
[Thu Aug 13 14:29:50 2015] 207.223
[Thu Aug 13 14:29:54 2015] Updating aperture counts using extracted products
[Thu Aug 13 14:29:54 2015] Total counts from fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13_src.pi.gz = 15.00
[Thu Aug 13 14:29:54 2015] Total counts from fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13_bgd.pi.gz = 6.00
[Thu Aug 13 14:29:54 2015] Got source and background scale factors 0.000002, 0.000019
[Thu Aug 13 14:29:54 2015] User source parameters:
  Position = (835.4, 542.3) = 0 42 4.99 -12 58 45.3
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source aperture counts = 14.5 +/- 5.0
  Background aperture counts = 0.5
  Rate = 0.001 +/- 0.0003

[Thu Aug 13 14:29:55 2015] Calculating source flux in energy range 0.30-8.00
[Thu Aug 13 14:29:55 2015] Using photon index=1.80, rate=0.000824, arf fullrun_ccd7_acisf13925_pi14-548_pass1_cl_src13.arf
[Thu Aug 13 14:29:55 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Aug 13 14:29:55 2015] Updating source flux to 7.7e-15
[Thu Aug 13 14:29:58 2015] Source 13 has fewer than 100.000000 counts, skipping spectral fitting