[Wed Jun 13 00:46:33 2012] Detection parameters:
  Position = (657.6, 615.0) = 15 11 7.15 7 51 49.7
  Extent = 0.5" x 0.5", rotation angle = 1 degrees
  Source counts = 20.6 +/- 4.6
  Background counts = 0.4
  Rate = 0.002 +/- 0.0004

[Wed Jun 13 00:46:34 2012] Off-axis axis estimate = 1.89'
[Wed Jun 13 00:58:03 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 00:58:03 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Jun 13 00:58:03 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.819
[Wed Jun 13 00:58:03 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.42"
[Wed Jun 13 01:04:51 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass0_src5.ximg exists
[Wed Jun 13 01:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13886_pi14-548_cl_pass0_src5.csv
[Wed Jun 13 01:04:51 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Jun 13 01:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13886_pi14-548_cl_pass0_src5.csv
[Wed Jun 13 01:04:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13886_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13886_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 01:04:51 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 13 01:04:51 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 13 01:04:51 2012] Fit fullrun_ccd7_acisf13886_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun 13 01:04:54 2012] Spatial fit model total counts = 20.734400, observed total counts = 21.000000
[Wed Jun 13 01:04:54 2012] Offset between fit and detection position for source 3 = 0.752775 pixels
[Wed Jun 13 01:04:54 2012] 20.734500 total counts/ 0.000000 bgd. counts: snr = 57448632488.623093
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.752775 pixels
  Position = (658.1, 615.5) = 15 11 7.15 7 51 49.7
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 20.7 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Wed Jun 13 01:04:54 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 01:04:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 01:04:54 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 01:04:54 2012] Source does appear to be extended
[Wed Jun 13 01:04:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 01:14:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 01:14:29 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Wed Jun 13 01:14:29 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.041
[Wed Jun 13 01:14:29 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.48"
[Wed Jun 13 01:21:24 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass1_src5.ximg exists
[Wed Jun 13 01:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13886_pi14-548_cl_pass1_src5.csv
[Wed Jun 13 01:21:24 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Jun 13 01:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13886_pi14-548_cl_pass1_src5.csv
[Wed Jun 13 01:21:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13886_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13886_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 01:21:25 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 13 01:21:25 2012] fullrun_ccd7_acisf13886_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 13 01:21:25 2012] Fit fullrun_ccd7_acisf13886_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jun 13 01:21:27 2012] Spatial fit model total counts = 21.950900, observed total counts = 21.000000
[Wed Jun 13 01:21:27 2012] Offset between fit and detection position for source 3 = 0.084569 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.084569 pixels
  Position = (658.1, 615.4) = 15 11 7.15 7 51 49.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 22.0 +/- 4.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Wed Jun 13 01:21:27 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 01:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 01:21:27 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 01:21:27 2012] Source does appear to be extended
[Wed Jun 13 01:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 01:27:15 2012] Writing source region out to fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3_src.reg
[Wed Jun 13 01:27:15 2012] Extracting stamp from image fullrun_ccd7_acisf13886_pi14-548_cl_sm2.00.img.gz, (638, 595) - (678, 635)
[Wed Jun 13 01:27:15 2012] Writing fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3.gif
[Wed Jun 13 01:28:21 2012] Size of ../../acisf13886/products/events/fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3_src.evt.gz[events] = 21 counts
[Wed Jun 13 01:28:21 2012] Mean chipx,y = (421.81, 542.38)
[Wed Jun 13 01:28:21 2012] Mean tdetx,y = (4338.81, 2244.38)
[Wed Jun 13 01:28:21 2012] chipx,y range = (404.00-437.00, 528.00-560.00)
[Wed Jun 13 01:28:21 2012] Size of ../../acisf13886/products/events/fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 2 counts
[Wed Jun 13 01:28:22 2012] Not generating rmf since there are only 21 counts
[Wed Jun 13 01:28:22 2012] arf not found, will run specextract
[Wed Jun 13 01:28:29 2012] ../../acisf13886/products/spectra/fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3.warf not found
[Wed Jun 13 01:28:29 2012] ../../acisf13886/products/spectra/fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3.wrmf not found
[Wed Jun 13 01:28:29 2012] Removal of ../../acisf13886/products/spectra/fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3.soff failed
[Wed Jun 13 01:30:00 2012] Spectrum 3 has only 22 counts, deleting rmf
[Wed Jun 13 01:30:00 2012] 232.183
[Wed Jun 13 01:30:02 2012] Updating aperture counts using extracted products
[Wed Jun 13 01:30:02 2012] Error reading totcts from fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Jun 13 01:30:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 01:30:02 2012] Using photon index=1.80, rate=0.00184, arf fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3.arf
[Wed Jun 13 01:30:02 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jun 13 01:30:02 2012] Updating source flux to 1.4e-14
[Wed Jun 13 01:30:06 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 13 01:30:07 2012] acisf13886/analysis//spectral/fullrun_ccd7_acisf13886_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete