[Mon Nov 14 18:35:26 2011] Detection parameters:
  Position = (950.7, 1078.8) = 12 35 39.14 21 12 52.0
  Extent = 2.3" x 0.8", rotation angle = 51 degrees
  Source counts = 13.6 +/- 3.9
  Background counts = 1.4
  Rate = 0.001 +/- 0.0003

[Mon Nov 14 18:35:26 2011] Off-axis axis estimate = 8.43'
[Mon Nov 14 18:45:07 2011] Using EEF radius (= 3.14 ")to estimate initial spatial extent for simple fitting
[Mon Nov 14 18:45:07 2011] Initial guess for spatial extent in simple fitting = 3.14"
[Mon Nov 14 18:45:07 2011] source mask rpix=6.4, npix_max = 189, mask sum = 196, frac = 1.036
[Mon Nov 14 18:45:07 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 3.14"
[Mon Nov 14 19:32:32 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass0_src4.ximg exists
[Mon Nov 14 19:32:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13883_pi14-548_cl_pass0_src4.csv
[Mon Nov 14 19:32:32 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass0_src4_1.ximg exists
[Mon Nov 14 19:32:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13883_pi14-548_cl_pass0_src4.csv
[Mon Nov 14 19:32:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13883_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13883_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 14 19:32:32 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon Nov 14 19:32:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13883_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Nov 14 19:32:32 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Nov 14 19:32:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13883_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Nov 14 19:32:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13883_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13883_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 14 19:34:48 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 35.705909 pixels away
[Mon Nov 14 19:34:48 2011] Vigneting correction estimate = 1.000000
[Mon Nov 14 19:34:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 14 19:34:48 2011] Assessing source extent using major
[Mon Nov 14 19:34:48 2011] Source does appear to be extended
[Mon Nov 14 19:34:48 2011] Computing asymmetry using major and minor axis, asym = 2.96
[Mon Nov 14 19:34:48 2011] Source is asymmetric
[Mon Nov 14 19:41:42 2011] Using EEF radius (= 3.14 ")to estimate initial spatial extent for simple fitting
[Mon Nov 14 19:41:42 2011] Initial guess for spatial extent in simple fitting = 3.14"
[Mon Nov 14 19:41:42 2011] source mask rpix=6.4, npix_max = 189, mask sum = 196, frac = 1.036
[Mon Nov 14 19:41:42 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 3.14"
[Mon Nov 14 20:16:04 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass1_src4.ximg exists
[Mon Nov 14 20:16:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13883_pi14-548_cl_pass1_src4.csv
[Mon Nov 14 20:16:04 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass1_src4_1.ximg exists
[Mon Nov 14 20:16:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13883_pi14-548_cl_pass1_src4.csv
[Mon Nov 14 20:16:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13883_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13883_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 14 20:16:04 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Mon Nov 14 20:16:04 2011] fullrun_ccd3_acisf13883_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Nov 14 20:16:04 2011] Fit fullrun_ccd3_acisf13883_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Nov 14 20:18:25 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 35.705909 pixels away
[Mon Nov 14 20:18:25 2011] Vigneting correction estimate = 1.000000
[Mon Nov 14 20:18:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 14 20:18:25 2011] Assessing source extent using major
[Mon Nov 14 20:18:25 2011] Source does appear to be extended
[Mon Nov 14 20:18:25 2011] Computing asymmetry using major and minor axis, asym = 2.96
[Mon Nov 14 20:18:25 2011] Source is asymmetric
[Mon Nov 14 20:19:46 2011] Writing source region out to fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4_src.reg
[Mon Nov 14 20:19:46 2011] Extracting stamp from image fullrun_ccd3_acisf13883_pi14-548_cl_sm2.00.img.gz, (845, 974) - (1056, 1184)
[Mon Nov 14 20:19:46 2011] Writing fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4.gif
[Mon Nov 14 20:21:23 2011] Size of ../../acisf13883/products/events/fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4_src.evt.gz[events] = 15 counts
[Mon Nov 14 20:21:23 2011] Mean chipx,y = (93.07, 600.13)
[Mon Nov 14 20:21:23 2011] Mean tdetx,y = (4531.87, 3154.07)
[Mon Nov 14 20:21:23 2011] chipx,y range = (62.00-108.00, 588.00-621.00)
[Mon Nov 14 20:21:23 2011] Size of ../../acisf13883/products/events/fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 26 counts
[Mon Nov 14 20:21:24 2011] Not generating rmf since there are only 13 counts
[Mon Nov 14 20:21:24 2011] arf not found, will run specextract
[Mon Nov 14 20:21:49 2011] ../../acisf13883/products/spectra/fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4.warf not found
[Mon Nov 14 20:21:49 2011] ../../acisf13883/products/spectra/fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4.wrmf not found
[Mon Nov 14 20:21:49 2011] Removal of ../../acisf13883/products/spectra/fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4.soff failed
[Mon Nov 14 20:21:55 2011] Spectrum 4 has only 14 counts, deleting rmf
[Mon Nov 14 20:21:55 2011] 170.778
[Mon Nov 14 20:25:30 2011] Updating aperture counts using extracted products
[Mon Nov 14 20:25:30 2011] Error reading totcts from fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Nov 14 20:25:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 14 20:25:30 2011] Using photon index=1.80, rate=0.00114, arf fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4.arf
[Mon Nov 14 20:25:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Nov 14 20:25:30 2011] Updating source flux to 1.6e-14
[Mon Nov 14 20:25:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Nov 14 20:25:33 2011] acisf13883/analysis//spectral/fullrun_ccd3_acisf13883_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete