[Tue Nov  8 23:06:38 2011] Detection parameters:
  Position = (673.3, 982.4) = 0 40 39.77 33 7 43.3
  Extent = 0.6" x 0.5", rotation angle = 21 degrees
  Source counts = 20.7 +/- 4.6
  Background counts = 0.3
  Rate = 0.002 +/- 0.0004

[Tue Nov  8 23:06:38 2011] Off-axis axis estimate = 3.95'
[Tue Nov  8 23:36:35 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Tue Nov  8 23:36:35 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Tue Nov  8 23:36:35 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.076
[Tue Nov  8 23:36:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.81"
[Tue Nov  8 23:44:28 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass0_src3.ximg exists
[Tue Nov  8 23:44:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13880_pi14-548_cl_pass0_src3.csv
[Tue Nov  8 23:44:28 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Nov  8 23:44:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13880_pi14-548_cl_pass0_src3.csv
[Tue Nov  8 23:44:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13880_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13880_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  8 23:44:28 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Nov  8 23:44:28 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Nov  8 23:44:28 2011] Fit fullrun_ccd6_acisf13880_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Nov  8 23:56:43 2011] Spatial fit model total counts = 34.417200, observed total counts = 35.000000
[Tue Nov  8 23:56:43 2011] Offset between fit and detection position for source 10 = 2.351040 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.351040 pixels
  Position = (675.6, 982.4) = 0 40 39.70 33 7 43.1
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 34.4 +/- 5.9
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Tue Nov  8 23:56:43 2011] Vigneting correction estimate = 1.000000
[Tue Nov  8 23:56:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  8 23:56:43 2011] Assessing source extent using major axis lower bound
[Tue Nov  8 23:56:43 2011] Source does appear to be extended
[Tue Nov  8 23:56:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  9 00:28:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov  9 00:28:42 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Wed Nov  9 00:28:42 2011] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.873
[Wed Nov  9 00:28:42 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.04"
[Wed Nov  9 00:41:23 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass1_src3.ximg exists
[Wed Nov  9 00:41:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf13880_pi14-548_cl_pass1_src3.csv
[Wed Nov  9 00:41:23 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Nov  9 00:41:23 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf13880_pi14-548_cl_pass1_src3.csv
[Wed Nov  9 00:41:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13880_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13880_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov  9 00:41:23 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Nov  9 00:41:23 2011] fullrun_ccd6_acisf13880_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Nov  9 00:41:23 2011] Fit fullrun_ccd6_acisf13880_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Nov  9 00:54:08 2011] Spatial fit model total counts = 34.997100, observed total counts = 35.000000
[Wed Nov  9 00:54:08 2011] Offset between fit and detection position for source 10 = 0.087537 pixels
[Wed Nov  9 00:54:08 2011] 34.879896 total counts/ 0.010596 bgd. counts: snr = 338.742903
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.087537 pixels
  Position = (675.5, 982.4) = 0 40 39.70 33 7 43.1
  Extent = 1.0 (0.9-1.1)", rotation angle = 0
  Source counts = 34.9 +/- 5.9
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Wed Nov  9 00:54:08 2011] Vigneting correction estimate = 1.000000
[Wed Nov  9 00:54:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov  9 00:54:08 2011] Assessing source extent using major axis lower bound
[Wed Nov  9 00:54:08 2011] Source does appear to be extended
[Wed Nov  9 00:54:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  9 00:58:08 2011] Writing source region out to fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10_src.reg
[Wed Nov  9 00:58:08 2011] Extracting stamp from image fullrun_ccd6_acisf13880_pi14-548_cl_sm2.00.img.gz, (630, 937) - (721, 1028)
[Wed Nov  9 00:58:08 2011] Writing fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10.gif
[Wed Nov  9 00:59:24 2011] Size of ../../acisf13880/products/events/fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10_src.evt.gz[events] = 35 counts
[Wed Nov  9 00:59:24 2011] Mean chipx,y = (773.06, 653.63)
[Wed Nov  9 00:59:24 2011] Mean tdetx,y = (3648.06, 2355.63)
[Wed Nov  9 00:59:24 2011] chipx,y range = (753.00-791.00, 632.00-671.00)
[Wed Nov  9 00:59:24 2011] Size of ../../acisf13880/products/events/fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 10 counts
[Wed Nov  9 00:59:25 2011] Not generating rmf since there are only 34 counts
[Wed Nov  9 00:59:25 2011] arf not found, will run specextract
[Wed Nov  9 00:59:54 2011] ../../acisf13880/products/spectra/fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10.warf not found
[Wed Nov  9 00:59:54 2011] ../../acisf13880/products/spectra/fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10.wrmf not found
[Wed Nov  9 00:59:54 2011] Removal of ../../acisf13880/products/spectra/fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10.soff failed
[Wed Nov  9 01:02:43 2011] Spectrum 10 has only 35 counts, deleting rmf
[Wed Nov  9 01:02:43 2011] 190.583
[Wed Nov  9 01:06:42 2011] Updating aperture counts using extracted products
[Wed Nov  9 01:06:42 2011] Error reading totcts from fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Nov  9 01:06:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  9 01:06:42 2011] Using photon index=1.80, rate=0.00293, arf fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10.arf
[Wed Nov  9 01:06:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov  9 01:06:42 2011] Updating source flux to 3.3e-14
[Wed Nov  9 01:06:46 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Nov  9 01:06:47 2011] acisf13880/analysis//spectral/fullrun_ccd6_acisf13880_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete