[Fri Feb 17 05:20:15 2012] Detection parameters:
  Position = (558.7, 1084.7) = 15 31 16.55 35 36 32.8
  Extent = 0.6" x 0.5", rotation angle = 146 degrees
  Source counts = 50.3 +/- 7.1
  Background counts = 0.7
  Rate = 0.004 +/- 0.0006

[Fri Feb 17 05:20:15 2012] Off-axis axis estimate = 3.27'
[Fri Feb 17 05:31:43 2012] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 05:31:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 05:31:43 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Fri Feb 17 05:31:43 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.929
[Fri Feb 17 05:31:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.64"
[Fri Feb 17 05:37:41 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass0_src3.ximg exists
[Fri Feb 17 05:37:41 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf13877_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 05:37:41 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Feb 17 05:37:41 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf13877_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 05:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13877_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13877_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:37:41 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 05:37:41 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 05:37:41 2012] Fit fullrun_ccd7_acisf13877_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 17 05:37:44 2012] Spatial fit model total counts = 52.285500, observed total counts = 51.000000
[Fri Feb 17 05:37:44 2012] Offset between fit and detection position for source 1 = 0.791443 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.791443 pixels
  Position = (559.2, 1085.3) = 15 31 16.55 35 36 32.9
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 52.3 +/- 7.2
  Background counts = 0.0
  Rate = 0.004 +/- 0.0006
[Fri Feb 17 05:37:44 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 05:37:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 05:37:44 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 05:37:44 2012] Source does appear to be extended
[Fri Feb 17 05:37:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 05:48:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 05:48:51 2012] Initial guess for spatial extent in simple fitting = 0.76"
[Fri Feb 17 05:48:51 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Fri Feb 17 05:48:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.76"
[Fri Feb 17 05:54:51 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass1_src3.ximg exists
[Fri Feb 17 05:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13877_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 05:54:51 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Feb 17 05:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13877_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 05:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13877_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13877_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:54:51 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 05:54:51 2012] fullrun_ccd7_acisf13877_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 05:54:51 2012] Fit fullrun_ccd7_acisf13877_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 17 05:54:54 2012] Spatial fit model total counts = 50.827500, observed total counts = 51.000000
[Fri Feb 17 05:54:54 2012] Offset between fit and detection position for source 1 = 0.045298 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.045298 pixels
  Position = (559.2, 1085.3) = 15 31 16.55 35 36 32.9
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 50.8 +/- 7.1
  Background counts = 0.0
  Rate = 0.004 +/- 0.0006
[Fri Feb 17 05:54:54 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 05:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 05:54:54 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 05:54:54 2012] Source does appear to be extended
[Fri Feb 17 05:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 05:58:33 2012] Writing source region out to fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1_src.reg
[Fri Feb 17 05:58:33 2012] Extracting stamp from image fullrun_ccd7_acisf13877_pi14-548_cl_sm2.00.img.gz, (524, 1051) - (594, 1120)
[Fri Feb 17 05:58:33 2012] Writing fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1.gif
[Fri Feb 17 05:59:09 2012] Size of ../../acisf13877/products/events/fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1_src.evt.gz[events] = 51 counts
[Fri Feb 17 05:59:09 2012] Mean chipx,y = (313.53, 115.53)
[Fri Feb 17 05:59:09 2012] Mean tdetx,y = (4230.53, 1817.53)
[Fri Feb 17 05:59:09 2012] chipx,y range = (293.00-332.00, 99.00-135.00)
[Fri Feb 17 05:59:09 2012] Size of ../../acisf13877/products/events/fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 10 counts
[Fri Feb 17 05:59:10 2012] Not generating rmf since there are only 50 counts
[Fri Feb 17 05:59:10 2012] arf not found, will run specextract
[Fri Feb 17 05:59:17 2012] ../../acisf13877/products/spectra/fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1.warf not found
[Fri Feb 17 05:59:17 2012] ../../acisf13877/products/spectra/fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1.wrmf not found
[Fri Feb 17 05:59:17 2012] Removal of ../../acisf13877/products/spectra/fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1.soff failed
[Fri Feb 17 05:59:58 2012] Spectrum 1 has only 51 counts, deleting rmf
[Fri Feb 17 05:59:58 2012] 222.272
[Fri Feb 17 05:59:59 2012] Updating aperture counts using extracted products
[Fri Feb 17 05:59:59 2012] Error reading totcts from fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Feb 17 05:59:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 05:59:59 2012] Using photon index=1.80, rate=0.00427, arf fullrun_ccd7_acisf13877_pi14-548_pass1_cl_src1.arf
[Fri Feb 17 05:59:59 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 05:59:59 2012] Updating source flux to 3.6e-14
[Fri Feb 17 06:00:03 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting