[Mon May  6 15:12:33 2013] Detection parameters:
  Position = (684.3, 108.1) = 0 42 43.84 41 16 30.0
  Extent = 0.7" x 0.5", rotation angle = 172 degrees
  Source counts = 19.5 +/- 4.6
  Background counts = 1.5
  Rate = 0.005 +/- 0.001

[Mon May  6 15:12:34 2013] Off-axis axis estimate = 0.78'
[Mon May  6 16:19:04 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon May  6 16:19:04 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Mon May  6 16:19:04 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Mon May  6 16:19:04 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 0.38"
[Mon May  6 17:28:28 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass0_src25.ximg exists
[Mon May  6 17:28:28 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13837_pi14-548_cl_pass0_src25.csv
[Mon May  6 17:28:28 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass0_src25_1.ximg exists
[Mon May  6 17:28:28 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13837_pi14-548_cl_pass0_src25.csv
[Mon May  6 17:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13837_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13837_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 17:28:28 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Mon May  6 17:28:28 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13837_pi14-548_cl_pass0_tfrozen_src25.csv
[Mon May  6 17:28:28 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Mon May  6 17:28:28 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13837_pi14-548_cl_pass0_tfrozen_src25.csv
[Mon May  6 17:28:28 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13837_pi14-548_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13837_pi14-548_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 17:45:46 2013] Spatial fit model total counts = -24.532800, observed total counts = 112.000000
[Mon May  6 17:45:46 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 17:45:46 2013] Vigneting correction estimate = 1.000000
[Mon May  6 17:45:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 17:45:46 2013] Assessing source extent using major
[Mon May  6 17:45:46 2013] Source does appear to be extended
[Mon May  6 17:45:46 2013] Computing asymmetry using major and minor axis, asym = 1.45
[Mon May  6 18:42:51 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon May  6 18:42:51 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Mon May  6 18:42:51 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Mon May  6 18:42:51 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 0.38"
[Mon May  6 19:50:31 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass1_src25.ximg exists
[Mon May  6 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13837_pi14-548_cl_pass1_src25.csv
[Mon May  6 19:50:31 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass1_src25_1.ximg exists
[Mon May  6 19:50:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13837_pi14-548_cl_pass1_src25.csv
[Mon May  6 19:50:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13837_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13837_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 19:50:32 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Mon May  6 19:50:32 2013] fullrun_ccd3_acisf13837_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Mon May  6 19:50:32 2013] Fit fullrun_ccd3_acisf13837_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Mon May  6 20:12:51 2013] Warning, spatial fit 25 centroid is now closest to src. 10
[Mon May  6 20:12:51 2013] Vigneting correction estimate = 1.000000
[Mon May  6 20:12:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 20:12:51 2013] Assessing source extent using major
[Mon May  6 20:12:51 2013] Source does appear to be extended
[Mon May  6 20:12:51 2013] Computing asymmetry using major and minor axis, asym = 1.45
[Mon May  6 20:12:51 2013] Source is confused with source 10
[Mon May  6 20:42:43 2013] Writing source region out to fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24_src.reg
[Mon May  6 20:42:43 2013] Extracting stamp from image fullrun_ccd3_acisf13837_pi14-548_cl_sm2.00.img.gz, (652, 76) - (717, 141)
[Mon May  6 20:42:43 2013] Writing fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24.gif
[Mon May  6 20:57:57 2013] Size of ../../acisf13837/products/events/fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24_src.evt.gz[events] = 22 counts
[Mon May  6 20:57:57 2013] Mean chipx,y = (945.00, 931.73)
[Mon May  6 20:57:57 2013] Mean tdetx,y = (4200.27, 4006.00)
[Mon May  6 20:57:57 2013] chipx,y range = (926.00-960.00, 912.00-945.00)
[Mon May  6 20:57:57 2013] Size of ../../acisf13837/products/events/fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 8 counts
[Mon May  6 20:57:58 2013] Not generating rmf since there are only 19 counts
[Mon May  6 20:57:58 2013] arf not found, will run specextract
[Mon May  6 20:58:26 2013] ../../acisf13837/products/spectra/fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24.warf not found
[Mon May  6 20:58:26 2013] ../../acisf13837/products/spectra/fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24.wrmf not found
[Mon May  6 20:58:26 2013] Removal of ../../acisf13837/products/spectra/fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24.soff failed
[Mon May  6 21:03:50 2013] Spectrum 24 has only 19 counts, deleting rmf
[Mon May  6 21:03:50 2013] 201.828
[Mon May  6 21:05:36 2013] Updating aperture counts using extracted products
[Mon May  6 21:05:36 2013] Total counts from fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24_src.pi.gz = 22.00
[Mon May  6 21:05:36 2013] Total counts from fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24_bgd.pi.gz = 8.00
[Mon May  6 21:05:36 2013] Got source and background scale factors 0.000001, 0.000016
[Mon May  6 21:05:36 2013] User source parameters:
  Position = (684.3, 108.1) = 0 42 43.84 41 16 30.0
  Extent = 0.7" x 0.5", rotation angle = 172
  Source aperture counts = 21.5 +/- 5.8
  Background aperture counts = 0.5
  Rate = 0.005 +/- 0.001

[Mon May  6 21:05:36 2013] Updating counts from extracted products
[Mon May  6 21:05:36 2013] Set source signif. to 21.46/0.73 = 29.28
[Mon May  6 21:05:37 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 21:05:37 2013] Using photon index=1.80, rate=0.00549, arf fullrun_ccd3_acisf13837_pi14-548_pass1_cl_src24.arf
[Mon May  6 21:05:37 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May  6 21:05:37 2013] Updating source flux to 6.2e-14
[Mon May  6 21:06:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting