[Sat Jun 29 09:58:38 2013] Detection parameters:
  Position = (1014.1, 680.2) = 0 42 41.67 41 21 5.7
  Extent = 0.8" x 0.5", rotation angle = 13 degrees
  Source counts = 17.7 +/- 4.2
  Background counts = 0.3
  Rate = 0.005 +/- 0.001

[Sat Jun 29 09:58:39 2013] Off-axis axis estimate = 5.43'
[Sat Jun 29 09:59:26 2013] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 09:59:26 2013] Initial guess for spatial extent in simple fitting = 1.36"
[Sat Jun 29 09:59:26 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.843
[Sat Jun 29 09:59:26 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 1.36"
[Sat Jun 29 09:59:27 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src23.ximg exists
[Sat Jun 29 09:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src23.csv
[Sat Jun 29 09:59:27 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src23_1.ximg exists
[Sat Jun 29 09:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src23.csv
[Sat Jun 29 09:59:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 09:59:28 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Sat Jun 29 09:59:28 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Jun 29 09:59:28 2013] Fit fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Jun 29 09:59:41 2013] Spatial fit model total counts = 17.185200, observed total counts = 19.000000
[Sat Jun 29 09:59:41 2013] Offset between fit and detection position for source 28 = 0.539851 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.539851 pixels
  Position = (1014.4, 680.6) = 0 42 41.68 41 21 5.6
  Extent = 1.1 (0.8-1.6)" x 0.6 (0.4-0.8)", rotation angle = 355 (336-17) degrees
  Source counts = 17.8 +/- 4.2
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Sat Jun 29 09:59:41 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 09:59:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 09:59:41 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 09:59:41 2013] Source does appear to be extended
[Sat Jun 29 09:59:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Sat Jun 29 10:00:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 10:00:04 2013] Initial guess for spatial extent in simple fitting = 0.83"
[Sat Jun 29 10:00:04 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.303
[Sat Jun 29 10:00:04 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 0.83"
[Sat Jun 29 10:00:05 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src23.ximg exists
[Sat Jun 29 10:00:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src23.csv
[Sat Jun 29 10:00:05 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src23_1.ximg exists
[Sat Jun 29 10:00:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src23.csv
[Sat Jun 29 10:00:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:06 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sat Jun 29 10:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src23.csv
[Sat Jun 29 10:00:06 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Jun 29 10:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src23.csv
[Sat Jun 29 10:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:18 2013] Spatial fit model total counts = 17.562000, observed total counts = 19.000000
[Sat Jun 29 10:00:18 2013] Offset between fit and detection position for source 28 = 0.037730 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.037730 pixels
  Position = (1014.4, 680.6) = 0 42 41.68 41 21 5.6
  Extent = 1.1 (0.5-1.5)" x 0.6 (0.4-0.8)", rotation angle = 354 (332-19) degrees
  Source counts = 17.9 +/- 4.2
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Sat Jun 29 10:00:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 10:00:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 10:00:18 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 10:00:18 2013] Source does appear to be extended
[Sat Jun 29 10:00:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.62
[Sat Jun 29 10:21:44 2013] Writing source region out to fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28_src.reg
[Sat Jun 29 10:21:44 2013] Extracting stamp from image fullrun_ccd3_acisf13835_pi14-548_cl_sm2.00.img.gz, (965, 631) - (1064, 730)
[Sat Jun 29 10:21:44 2013] Writing fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28.gif
[Sat Jun 29 10:36:18 2013] Size of ../../acisf13835/products/events/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28_src.evt.gz[events] = 19 counts
[Sat Jun 29 10:36:18 2013] Mean chipx,y = (915.74, 365.05)
[Sat Jun 29 10:36:18 2013] Mean tdetx,y = (4766.95, 3976.74)
[Sat Jun 29 10:36:18 2013] chipx,y range = (903.00-938.00, 348.00-381.00)
[Sat Jun 29 10:36:18 2013] Size of ../../acisf13835/products/events/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 5 counts
[Sat Jun 29 10:36:19 2013] Not generating rmf since there are only 17 counts
[Sat Jun 29 10:36:19 2013] arf not found, will run specextract
[Sat Jun 29 10:36:47 2013] ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28.warf not found
[Sat Jun 29 10:36:47 2013] ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28.wrmf not found
[Sat Jun 29 10:36:47 2013] Removal of ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28.soff failed
[Sat Jun 29 10:41:41 2013] Spectrum 28 has only 18 counts, deleting rmf
[Sat Jun 29 10:41:41 2013] 187.261
[Sat Jun 29 10:42:12 2013] Updating aperture counts using extracted products
[Sat Jun 29 10:42:12 2013] Total counts from fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28_src.pi.gz = 19.00
[Sat Jun 29 10:42:12 2013] Total counts from fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28_bgd.pi.gz = 5.00
[Sat Jun 29 10:42:12 2013] Got source and background scale factors 0.000002, 0.000042
[Sat Jun 29 10:42:12 2013] User source parameters:
  Position = (1014.4, 680.6) = 0 42 41.68 41 21 5.6
  Extent = 1.1 (0.5-1.5)" x 0.6 (0.4-0.8)", rotation angle = 354 (332-19) degrees
  Source aperture counts = 18.8 +/- 5.4
  Background aperture counts = 0.2
  Rate = 0.005 +/- 0.001

[Sat Jun 29 10:42:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 10:42:13 2013] Using photon index=1.80, rate=0.00459, arf fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src28.arf
[Sat Jun 29 10:42:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 29 10:42:13 2013] Updating source flux to 5.6e-14
[Sat Jun 29 10:42:54 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting