[Sat Jun 29 09:58:38 2013] Detection parameters:
  Position = (371.1, 431.1) = 0 43 9.75 41 19 3.0
  Extent = 1.0" x 0.6", rotation angle = 56 degrees
  Source counts = 26.4 +/- 5.2
  Background counts = 0.6
  Rate = 0.007 +/- 0.001

[Sat Jun 29 09:58:39 2013] Off-axis axis estimate = 5.63'
[Sat Jun 29 09:59:26 2013] Using EEF radius (= 1.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 09:59:26 2013] Initial guess for spatial extent in simple fitting = 1.45"
[Sat Jun 29 09:59:26 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.029
[Sat Jun 29 09:59:26 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 1.45"
[Sat Jun 29 09:59:27 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src18.ximg exists
[Sat Jun 29 09:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src18.csv
[Sat Jun 29 09:59:27 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src18_1.ximg exists
[Sat Jun 29 09:59:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src18.csv
[Sat Jun 29 09:59:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 09:59:28 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun 29 09:59:28 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun 29 09:59:28 2013] Fit fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Jun 29 09:59:41 2013] Spatial fit model total counts = 28.191700, observed total counts = 33.000000
[Sat Jun 29 09:59:41 2013] Offset between fit and detection position for source 27 = 0.915533 pixels
[Sat Jun 29 09:59:41 2013] 30.042324 total counts/ 0.115124 bgd. counts: snr = 88.202958
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.915533 pixels
  Position = (371.9, 431.7) = 0 43 9.74 41 19 3.0
  Extent = 1.8 (1.3-2.5)" x 0.8 (0.5-1.1)", rotation angle = 132 (115-147) degrees
  Source counts = 29.9 +/- 5.5
  Background counts = 0.1
  Rate = 0.008 +/- 0.001
[Sat Jun 29 09:59:41 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 09:59:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 09:59:41 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 09:59:41 2013] Source does appear to be extended
[Sat Jun 29 09:59:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Sat Jun 29 10:00:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 10:00:04 2013] Initial guess for spatial extent in simple fitting = 1.30"
[Sat Jun 29 10:00:04 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912
[Sat Jun 29 10:00:04 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 1.30"
[Sat Jun 29 10:00:05 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src18.ximg exists
[Sat Jun 29 10:00:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src18.csv
[Sat Jun 29 10:00:05 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Jun 29 10:00:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src18.csv
[Sat Jun 29 10:00:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:06 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun 29 10:00:06 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun 29 10:00:06 2013] Fit fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Jun 29 10:00:18 2013] Spatial fit model total counts = 29.766200, observed total counts = 33.000000
[Sat Jun 29 10:00:18 2013] Offset between fit and detection position for source 27 = 0.205272 pixels
[Sat Jun 29 10:00:18 2013] 31.522520 total counts/ 2.786320 bgd. counts: snr = 17.215270
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.205272 pixels
  Position = (371.7, 431.5) = 0 43 9.75 41 19 2.9
  Extent = 1.7 (1.3-2.6)" x 0.8 (0.4-1.2)", rotation angle = 313 (295-330) degrees
  Source counts = 28.7 +/- 5.6
  Background counts = 2.8
  Rate = 0.007 +/- 0.001
[Sat Jun 29 10:00:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 10:00:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 10:00:18 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 10:00:18 2013] Source does appear to be extended
[Sat Jun 29 10:00:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Sat Jun 29 10:21:44 2013] Writing source region out to fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27_src.reg
[Sat Jun 29 10:21:44 2013] Extracting stamp from image fullrun_ccd3_acisf13835_pi14-548_cl_sm2.00.img.gz, (292, 352) - (451, 511)
[Sat Jun 29 10:21:44 2013] Writing fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27.gif
[Sat Jun 29 10:33:04 2013] Size of ../../acisf13835/products/events/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27_src.evt.gz[events] = 31 counts
[Sat Jun 29 10:33:04 2013] Mean chipx,y = (330.06, 723.84)
[Sat Jun 29 10:33:04 2013] Mean tdetx,y = (4408.16, 3391.06)
[Sat Jun 29 10:33:04 2013] chipx,y range = (314.00-351.00, 704.00-744.00)
[Sat Jun 29 10:33:04 2013] Size of ../../acisf13835/products/events/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 23 counts
[Sat Jun 29 10:33:06 2013] Not generating rmf since there are only 28 counts
[Sat Jun 29 10:33:06 2013] arf not found, will run specextract
[Sat Jun 29 10:33:32 2013] ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27.warf not found
[Sat Jun 29 10:33:32 2013] ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27.wrmf not found
[Sat Jun 29 10:33:32 2013] Removal of ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27.soff failed
[Sat Jun 29 10:41:41 2013] Spectrum 27 has only 29 counts, deleting rmf
[Sat Jun 29 10:41:41 2013] 178.019
[Sat Jun 29 10:42:11 2013] Updating aperture counts using extracted products
[Sat Jun 29 10:42:11 2013] Total counts from fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27_src.pi.gz = 31.00
[Sat Jun 29 10:42:11 2013] Total counts from fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27_bgd.pi.gz = 23.00
[Sat Jun 29 10:42:11 2013] Got source and background scale factors 0.000004, 0.000110
[Sat Jun 29 10:42:11 2013] User source parameters:
  Position = (371.7, 431.5) = 0 43 9.75 41 19 2.9
  Extent = 1.7 (1.3-2.6)" x 0.8 (0.4-1.2)", rotation angle = 313 (295-330) degrees
  Source aperture counts = 30.1 +/- 6.6
  Background aperture counts = 0.9
  Rate = 0.008 +/- 0.002

[Sat Jun 29 10:42:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 10:42:13 2013] Using photon index=1.80, rate=0.00737, arf fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src27.arf
[Sat Jun 29 10:42:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 29 10:42:13 2013] Updating source flux to 9.4e-14
[Sat Jun 29 10:42:54 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting