[Sat Jun 29 09:58:38 2013] Detection parameters:
  Position = (952.4, 76.5) = 0 42 44.37 41 16 8.7
  Extent = 0.6" x 0.5", rotation angle = 92 degrees
  Source counts = 41.0 +/- 6.6
  Background counts = 2.0
  Rate = 0.01 +/- 0.002

[Sat Jun 29 09:58:39 2013] Off-axis axis estimate = 0.49'
[Sat Jun 29 09:59:26 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 09:59:26 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Jun 29 09:59:26 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.334
[Sat Jun 29 09:59:26 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 0.39"
[Sat Jun 29 09:59:27 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src14.ximg exists
[Sat Jun 29 09:59:27 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src14_1.ximg exists
[Sat Jun 29 09:59:27 2013] Fit fullrun_ccd3_acisf13835_pi14-548_cl_pass0_src14 appears to have run properly
[Sat Jun 29 09:59:28 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 29 09:59:28 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 29 09:59:28 2013] Fit fullrun_ccd3_acisf13835_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jun 29 09:59:41 2013] Spatial fit model total counts = 69.392700, observed total counts = 74.000000
[Sat Jun 29 09:59:41 2013] Offset between fit and detection position for source 15 = 1.157006 pixels
[Sat Jun 29 09:59:41 2013] 64.816700 total counts/ 30.286600 bgd. counts: snr = 6.274405
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.157006 pixels
  Position = (953.0, 77.5) = 0 42 44.36 41 16 8.9
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 34.5 +/- 8.1
  Background counts = 30.3
  Rate = 0.009 +/- 0.002
[Sat Jun 29 09:59:41 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 09:59:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 09:59:41 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 09:59:41 2013] Source does appear to be extended
[Sat Jun 29 09:59:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 10:00:04 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 10:00:04 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Jun 29 10:00:04 2013] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.703
[Sat Jun 29 10:00:04 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 0.47"
[Sat Jun 29 10:00:05 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src14.ximg exists
[Sat Jun 29 10:00:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src14.csv
[Sat Jun 29 10:00:05 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src14_1.ximg exists
[Sat Jun 29 10:00:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src14.csv
[Sat Jun 29 10:00:05 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13835_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:06 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun 29 10:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src14.csv
[Sat Jun 29 10:00:06 2013] fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun 29 10:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src14.csv
[Sat Jun 29 10:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13835_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:18 2013] Spatial fit model total counts = 50.651100, observed total counts = 73.000000
[Sat Jun 29 10:00:18 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 10:00:18 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 10:00:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 10:00:18 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 10:00:18 2013] Source does appear to be extended
[Sat Jun 29 10:00:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 10:21:43 2013] Writing source region out to fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15_src.reg
[Sat Jun 29 10:21:43 2013] Extracting stamp from image fullrun_ccd3_acisf13835_pi14-548_cl_sm2.00.img.gz, (931, 56) - (975, 99)
[Sat Jun 29 10:21:44 2013] Writing fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15.gif
[Sat Jun 29 10:30:25 2013] Size of ../../acisf13835/products/events/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15_src.evt.gz[events] = 41 counts
[Sat Jun 29 10:30:25 2013] Mean chipx,y = (966.41, 974.17)
[Sat Jun 29 10:30:25 2013] Mean tdetx,y = (4157.83, 4027.41)
[Sat Jun 29 10:30:25 2013] chipx,y range = (948.00-982.00, 954.00-988.00)
[Sat Jun 29 10:30:25 2013] Size of ../../acisf13835/products/events/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 10 counts
[Sat Jun 29 10:30:26 2013] Not generating rmf since there are only 34 counts
[Sat Jun 29 10:30:26 2013] arf not found, will run specextract
[Sat Jun 29 10:30:54 2013] ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15.warf not found
[Sat Jun 29 10:30:54 2013] ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15.wrmf not found
[Sat Jun 29 10:30:54 2013] Removal of ../../acisf13835/products/spectra/fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15.soff failed
[Sat Jun 29 10:41:41 2013] Spectrum 15 has only 35 counts, deleting rmf
[Sat Jun 29 10:41:41 2013] 202.319
[Sat Jun 29 10:42:11 2013] Updating aperture counts using extracted products
[Sat Jun 29 10:42:11 2013] Total counts from fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15_src.pi.gz = 41.00
[Sat Jun 29 10:42:11 2013] Total counts from fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15_bgd.pi.gz = 10.00
[Sat Jun 29 10:42:11 2013] Got source and background scale factors 0.000001, 0.000006
[Sat Jun 29 10:42:11 2013] User source parameters:
  Position = (953.0, 77.5) = 0 42 44.36 41 16 8.9
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source aperture counts = 39.8 +/- 7.5
  Background aperture counts = 1.2
  Rate = 0.01 +/- 0.002

[Sat Jun 29 10:42:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 10:42:13 2013] Using photon index=1.80, rate=0.00886, arf fullrun_ccd3_acisf13835_pi14-548_pass1_cl_src15.arf
[Sat Jun 29 10:42:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 29 10:42:13 2013] Updating source flux to 9.9e-14
[Sat Jun 29 10:42:54 2013] Flag p found in src. 15 procflags, skipping spectral fitting
[Sat Jun 29 10:42:54 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting