[Sat Jun 29 09:58:37 2013] Detection parameters:
  Position = (1140.4, 978.1) = 0 42 43.80 41 15 14.3
  Extent = 0.5" x 0.5", rotation angle = 68 degrees
  Source counts = 18.4 +/- 4.4
  Background counts = 0.6
  Rate = 0.005 +/- 0.001

[Sat Jun 29 09:58:37 2013] Off-axis axis estimate = 0.58'
[Sat Jun 29 09:59:25 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 09:59:25 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Jun 29 09:59:25 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.901
[Sat Jun 29 09:59:25 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.39"
[Sat Jun 29 09:59:26 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src8.ximg exists
[Sat Jun 29 09:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src8.csv
[Sat Jun 29 09:59:26 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src8_1.ximg exists
[Sat Jun 29 09:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src8.csv
[Sat Jun 29 09:59:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 09:59:26 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sat Jun 29 09:59:26 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Jun 29 09:59:26 2013] Fit fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Jun 29 09:59:38 2013] Spatial fit model total counts = 18.589800, observed total counts = 23.000000
[Sat Jun 29 09:59:38 2013] Offset between fit and detection position for source 6 = 0.611525 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.611525 pixels
  Position = (1140.9, 978.5) = 0 42 43.80 41 15 14.3
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.2-0.3)", rotation angle = 113 (99-126) degrees
  Source counts = 19.4 +/- 4.4
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Sat Jun 29 09:59:38 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 09:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 09:59:38 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 09:59:38 2013] Source does appear to be extended
[Sat Jun 29 09:59:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Sat Jun 29 10:00:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 10:00:03 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Jun 29 10:00:03 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.900
[Sat Jun 29 10:00:03 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.39"
[Sat Jun 29 10:00:03 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src8.ximg exists
[Sat Jun 29 10:00:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src8.csv
[Sat Jun 29 10:00:03 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src8_1.ximg exists
[Sat Jun 29 10:00:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src8.csv
[Sat Jun 29 10:00:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:04 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sat Jun 29 10:00:04 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jun 29 10:00:04 2013] Fit fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Jun 29 10:00:15 2013] Spatial fit model total counts = 21.740800, observed total counts = 23.000000
[Sat Jun 29 10:00:15 2013] Offset between fit and detection position for source 6 = 0.175162 pixels
[Sat Jun 29 10:00:15 2013] 22.060230 total counts/ 3.917130 bgd. counts: snr = 9.167006
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.175162 pixels
  Position = (1141.0, 978.7) = 0 42 43.80 41 15 14.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.1 +/- 4.7
  Background counts = 3.9
  Rate = 0.005 +/- 0.001
[Sat Jun 29 10:00:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 10:00:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 10:00:15 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 10:00:15 2013] Source does appear to be extended
[Sat Jun 29 10:00:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 10:11:59 2013] Writing source region out to fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6_src.reg
[Sat Jun 29 10:11:59 2013] Extracting stamp from image fullrun_ccd2_acisf13835_pi14-548_cl_sm2.00.img.gz, (1123, 961) - (1159, 997)
[Sat Jun 29 10:11:59 2013] Writing fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6.gif
[Sat Jun 29 10:16:36 2013] Size of ../../acisf13835/products/events/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6_src.evt.gz[events] = 19 counts
[Sat Jun 29 10:16:36 2013] Mean chipx,y = (23.84, 994.63)
[Sat Jun 29 10:16:36 2013] Mean tdetx,y = (4055.63, 4062.16)
[Sat Jun 29 10:16:36 2013] chipx,y range = (11.00-44.00, 977.00-1010.00)
[Sat Jun 29 10:16:36 2013] Size of ../../acisf13835/products/events/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 5 counts
[Sat Jun 29 10:16:37 2013] Not generating rmf since there are only 18 counts
[Sat Jun 29 10:16:37 2013] arf not found, will run specextract
[Sat Jun 29 10:17:07 2013] ../../acisf13835/products/spectra/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6.warf not found
[Sat Jun 29 10:17:07 2013] ../../acisf13835/products/spectra/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6.wrmf not found
[Sat Jun 29 10:17:07 2013] Removal of ../../acisf13835/products/spectra/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6.soff failed
[Sat Jun 29 10:21:43 2013] Spectrum 6 has only 18 counts, deleting rmf
[Sat Jun 29 10:21:43 2013] 196.962
[Sat Jun 29 10:42:08 2013] Updating aperture counts using extracted products
[Sat Jun 29 10:42:08 2013] Total counts from fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6_src.pi.gz = 19.00
[Sat Jun 29 10:42:08 2013] Total counts from fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6_bgd.pi.gz = 5.00
[Sat Jun 29 10:42:08 2013] Got source and background scale factors 0.000000, 0.000006
[Sat Jun 29 10:42:08 2013] User source parameters:
  Position = (1141.0, 978.7) = 0 42 43.80 41 15 14.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 18.6 +/- 5.4
  Background aperture counts = 0.4
  Rate = 0.005 +/- 0.001

[Sat Jun 29 10:42:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 10:42:09 2013] Using photon index=1.80, rate=0.00465, arf fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src6.arf
[Sat Jun 29 10:42:09 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 29 10:42:09 2013] Updating source flux to 5.3e-14
[Sat Jun 29 10:42:46 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting