[Sat Jun 29 09:58:36 2013] Detection parameters:
  Position = (1031.8, 992.3) = 0 42 48.54 41 15 21.3
  Extent = 0.5" x 0.5", rotation angle = 31 degrees
  Source counts = 215.7 +/- 14.7
  Background counts = 1.3
  Rate = 0.06 +/- 0.004

[Sat Jun 29 09:58:37 2013] Off-axis axis estimate = 0.66'
[Sat Jun 29 09:59:25 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 09:59:25 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Jun 29 09:59:25 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.364
[Sat Jun 29 09:59:25 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.39"
[Sat Jun 29 09:59:25 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src2.ximg exists
[Sat Jun 29 09:59:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src2.csv
[Sat Jun 29 09:59:25 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Jun 29 09:59:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src2.csv
[Sat Jun 29 09:59:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13835_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 09:59:26 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 29 09:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Jun 29 09:59:26 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 29 09:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src2.csv
[Sat Jun 29 09:59:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13835_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 09:59:38 2013] Source 1 is offset by -2.310888 and 0.512531 pixels which is larger than
2 X fitted extent = 0.556248 x 0.556248, not incorporating fit results
[Sat Jun 29 09:59:38 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 09:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 09:59:38 2013] Assessing source extent using major
[Sat Jun 29 09:59:38 2013] Source does appear to be extended
[Sat Jun 29 09:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 10:00:03 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 10:00:03 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Jun 29 10:00:03 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.364
[Sat Jun 29 10:00:03 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.39"
[Sat Jun 29 10:00:03 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src2.ximg exists
[Sat Jun 29 10:00:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src2.csv
[Sat Jun 29 10:00:03 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Jun 29 10:00:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src2.csv
[Sat Jun 29 10:00:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13835_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:03 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 29 10:00:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Jun 29 10:00:04 2013] fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 29 10:00:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat Jun 29 10:00:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13835_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 10:00:15 2013] Source 1 is offset by -2.377758 and 0.564831 pixels which is larger than
2 X fitted extent = 0.508931 x 0.508931, not incorporating fit results
[Sat Jun 29 10:00:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 10:00:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 10:00:15 2013] Assessing source extent using major
[Sat Jun 29 10:00:15 2013] Source does appear to be extended
[Sat Jun 29 10:00:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 10:11:59 2013] Writing source region out to fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1_src.reg
[Sat Jun 29 10:11:59 2013] Extracting stamp from image fullrun_ccd2_acisf13835_pi14-548_cl_sm2.00.img.gz, (1009, 970) - (1054, 1015)
[Sat Jun 29 10:11:59 2013] Writing fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1.gif
[Sat Jun 29 10:12:39 2013] Size of ../../acisf13835/products/events/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1_src.evt.gz[events] = 225 counts
[Sat Jun 29 10:12:39 2013] Mean chipx,y = (138.79, 988.62)
[Sat Jun 29 10:12:39 2013] Mean tdetx,y = (4049.62, 3947.21)
[Sat Jun 29 10:12:39 2013] chipx,y range = (119.00-156.00, 972.00-1008.00)
[Sat Jun 29 10:12:39 2013] Size of ../../acisf13835/products/events/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Sat Jun 29 10:12:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 29 10:12:41 2013] arf not found, will run specextract
[Sat Jun 29 10:13:10 2013] ../../acisf13835/products/spectra/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1.warf not found
[Sat Jun 29 10:13:10 2013] ../../acisf13835/products/spectra/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1.wrmf not found
[Sat Jun 29 10:13:10 2013] Removal of ../../acisf13835/products/spectra/fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1.soff failed
[Sat Jun 29 10:21:43 2013] Keeping rmf generated by specextract
[Sat Jun 29 10:21:43 2013] 184.849
[Sat Jun 29 10:42:07 2013] Updating aperture counts using extracted products
[Sat Jun 29 10:42:07 2013] Total counts from fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1_src.pi.gz = 225.00
[Sat Jun 29 10:42:07 2013] Total counts from fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1_bgd.pi.gz = 15.00
[Sat Jun 29 10:42:07 2013] Got source and background scale factors 0.000001, 0.000009
[Sat Jun 29 10:42:07 2013] User source parameters:
  Position = (1031.8, 992.3) = 0 42 48.54 41 15 21.3
  Extent = 0.5" x 0.5", rotation angle = 31
  Source aperture counts = 223.7 +/- 16.0
  Background aperture counts = 1.3
  Rate = 0.06 +/- 0.004

[Sat Jun 29 10:42:07 2013] Updating counts from extracted products
[Sat Jun 29 10:42:07 2013] Set source signif. to 223.73/1.13 = 198.50
[Sat Jun 29 10:42:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 10:42:09 2013] Using photon index=1.80, rate=0.0573, arf fullrun_ccd2_acisf13835_pi14-548_pass1_cl_src1.arf
[Sat Jun 29 10:42:09 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 29 10:42:09 2013] Updating source flux to 7e-13
[Sat Jun 29 10:42:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting