[Thu Aug 13 14:34:42 2015] Detection parameters:
  Position = (807.8, 393.9) = 0 47 6.71 -25 21 27.8
  Extent = 1.2" x 0.7", rotation angle = 45 degrees
  Source counts = 24.6 +/- 5.1
  Background counts = 1.4
  Rate = 0.001 +/- 0.0003

[Thu Aug 13 14:34:43 2015] Off-axis axis estimate = 7.65'
[Thu Aug 13 15:00:18 2015] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug 13 15:00:18 2015] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 13 15:00:18 2015] Initial guess for spatial extent in simple fitting = 2.59"
[Thu Aug 13 15:00:18 2015] source mask rpix=5.3, npix_max = 133, mask sum = 132, frac = 0.992
[Thu Aug 13 15:00:18 2015] Giving source the simple spatial ID 24 for pass 0, mean size = 2.59"
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src24.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src24.csv
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src24_1.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src24.csv
[Thu Aug 13 15:21:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Aug 13 15:21:03 2015] Fit fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Aug 13 15:21:15 2015] Spatial fit model total counts = 30.559400, observed total counts = 33.000000
[Thu Aug 13 15:21:15 2015] Offset between fit and detection position for source 31 = 0.571956 pixels
[Thu Aug 13 15:21:15 2015] 33.920240 total counts/ 4.280640 bgd. counts: snr = 14.325770
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.571956 pixels
  Position = (808.4, 394.1) = 0 47 6.72 -25 21 28.1
  Extent = 1.3 (1.1-1.6)", rotation angle = 0
  Source counts = 29.6 +/- 5.8
  Background counts = 4.3
  Rate = 0.002 +/- 0.0003
[Thu Aug 13 15:21:15 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:21:15 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:21:15 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 15:21:15 2015] Source does appear to be extended
[Thu Aug 13 15:21:15 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 15:42:31 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 13 15:42:31 2015] Initial guess for spatial extent in simple fitting = 1.35"
[Thu Aug 13 15:42:31 2015] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.859
[Thu Aug 13 15:42:31 2015] Giving source the simple spatial ID 24 for pass 1, mean size = 1.35"
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_src24.ximg exists
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_src24_1.ximg exists
[Thu Aug 13 15:57:43 2015] Fit fullrun_ccd3_acisf13830_pi14-548_cl_pass1_src24 appears to have run properly
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Thu Aug 13 15:57:43 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src24.csv
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Aug 13 15:57:43 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src24.csv
[Thu Aug 13 15:57:43 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:57:53 2015] Spatial fit model total counts = 28.478800, observed total counts = 30.000000
[Thu Aug 13 15:57:53 2015] Offset between fit and detection position for source 31 = 0.453349 pixels
[Thu Aug 13 15:57:53 2015] 31.863900 total counts/ 7.326000 bgd. counts: snr = 9.065754
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.453349 pixels
  Position = (808.0, 394.4) = 0 47 6.74 -25 21 28.0
  Extent = 1.3 (1.0-2.0)" x 0.8 (0.6-1.5)", rotation angle = 36 (158-0) degrees
  Source counts = 24.5 +/- 5.6
  Background counts = 7.3
  Rate = 0.001 +/- 0.0003
[Thu Aug 13 15:57:53 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:57:53 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:57:53 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 15:57:53 2015] Source does appear to be extended
[Thu Aug 13 15:57:53 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.66
[Thu Aug 13 16:33:17 2015] Writing source region out to fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31_src.reg
[Thu Aug 13 16:33:17 2015] Extracting stamp from image fullrun_ccd3_acisf13830_pi14-548_cl_sm2.00.img.gz, (747, 334) - (869, 455)
[Thu Aug 13 16:33:17 2015] Writing fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31.gif
[Thu Aug 13 16:52:07 2015] Size of ../../acisf13830/products/events/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31_src.evt.gz[events] = 28 counts
[Thu Aug 13 16:52:07 2015] Mean chipx,y = (529.64, 191.54)
[Thu Aug 13 16:52:07 2015] Mean tdetx,y = (4940.46, 3590.64)
[Thu Aug 13 16:52:07 2015] chipx,y range = (514.00-549.00, 174.00-206.00)
[Thu Aug 13 16:52:07 2015] Size of ../../acisf13830/products/events/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 31 counts
[Thu Aug 13 16:52:08 2015] Not generating rmf since there are only 24 counts
[Thu Aug 13 16:52:08 2015] arf not found, will run specextract
[Thu Aug 13 16:52:37 2015] ../../acisf13830/products/spectra/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31.warf not found
[Thu Aug 13 16:52:37 2015] ../../acisf13830/products/spectra/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31.wrmf not found
[Thu Aug 13 16:52:37 2015] Removal of ../../acisf13830/products/spectra/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31.soff failed
[Thu Aug 13 16:54:15 2015] Spectrum 31 has only 25 counts, deleting rmf
[Thu Aug 13 16:54:15 2015] 142.761
[Thu Aug 13 16:55:13 2015] Updating aperture counts using extracted products
[Thu Aug 13 16:55:13 2015] Total counts from fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31_src.pi.gz = 28.00
[Thu Aug 13 16:55:13 2015] Total counts from fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31_bgd.pi.gz = 31.00
[Thu Aug 13 16:55:13 2015] Got source and background scale factors 0.000003, 0.000065
[Thu Aug 13 16:55:13 2015] User source parameters:
  Position = (808.0, 394.4) = 0 47 6.74 -25 21 28.0
  Extent = 1.3 (1.0-2.0)" x 0.8 (0.6-1.5)", rotation angle = 36 (158-0) degrees
  Source aperture counts = 26.4 +/- 6.4
  Background aperture counts = 1.6
  Rate = 0.001 +/- 0.0003

[Thu Aug 13 16:55:14 2015] Calculating source flux in energy range 0.30-8.00
[Thu Aug 13 16:55:14 2015] Using photon index=1.80, rate=0.00124, arf fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src31.arf
[Thu Aug 13 16:55:14 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Aug 13 16:55:14 2015] Updating source flux to 2.2e-14
[Thu Aug 13 16:55:26 2015] Source 31 has fewer than 100.000000 counts, skipping spectral fitting