[Thu Aug 13 14:34:42 2015] Detection parameters:
  Position = (557.7, 358.3) = 0 47 15.79 -25 21 45.4
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 14.5 +/- 3.9
  Background counts = 0.5
  Rate = 0.0007 +/- 0.0002

[Thu Aug 13 14:34:43 2015] Off-axis axis estimate = 6.37'
[Thu Aug 13 15:00:18 2015] Using EEF radius (= 1.82 ")to estimate initial spatial extent for simple fitting
[Thu Aug 13 15:00:18 2015] Initial guess for spatial extent in simple fitting = 1.82"
[Thu Aug 13 15:00:18 2015] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.018
[Thu Aug 13 15:00:18 2015] Giving source the simple spatial ID 28 for pass 0, mean size = 1.82"
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src28.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src28.csv
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src28_1.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src28.csv
[Thu Aug 13 15:21:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src28.csv
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src28.csv
[Thu Aug 13 15:21:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:21:15 2015] Spatial fit model total counts = 23.207400, observed total counts = 30.000000
[Thu Aug 13 15:21:15 2015] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 13 15:21:15 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:21:15 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:21:15 2015] Assessing source extent using major
[Thu Aug 13 15:21:15 2015] Source does appear to be extended
[Thu Aug 13 15:21:15 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 15:21:15 2015] Deleting source due to low Poisson probability 0.9