[Thu Aug 13 14:34:42 2015] Detection parameters:
  Position = (235.0, 939.6) = 0 47 27.50 -25 16 59.5
  Extent = 0.5" x 0.5", rotation angle = 161 degrees
  Source counts = 21.4 +/- 4.7
  Background counts = 0.6
  Rate = 0.001 +/- 0.0002

[Thu Aug 13 14:34:43 2015] Off-axis axis estimate = 1.39'
[Thu Aug 13 15:00:18 2015] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Aug 13 15:00:18 2015] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Aug 13 15:00:18 2015] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.905
[Thu Aug 13 15:00:18 2015] Giving source the simple spatial ID 26 for pass 0, mean size = 0.39"
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src26.ximg exists
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src26_1.ximg exists
[Thu Aug 13 15:21:03 2015] Fit fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src26 appears to have run properly
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src26.csv
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src26.csv
[Thu Aug 13 15:21:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:21:15 2015] Spatial fit model total counts = 22.475900, observed total counts = 23.000000
[Thu Aug 13 15:21:15 2015] Offset between fit and detection position for source 28 = 0.694486 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.694486 pixels
  Position = (235.4, 940.1) = 0 47 27.51 -25 16 59.5
  Extent = 0.6 (0.5-0.9)" x 0.3 (0.2-0.4)", rotation angle = 342 (324-358) degrees
  Source counts = 22.5 +/- 4.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Thu Aug 13 15:21:15 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:21:15 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:21:15 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 15:21:15 2015] Source does appear to be extended
[Thu Aug 13 15:21:15 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Thu Aug 13 15:42:31 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 13 15:42:31 2015] Initial guess for spatial extent in simple fitting = 0.47"
[Thu Aug 13 15:42:31 2015] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.073
[Thu Aug 13 15:42:31 2015] Giving source the simple spatial ID 26 for pass 1, mean size = 0.47"
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_src26.ximg exists
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_src26_1.ximg exists
[Thu Aug 13 15:57:43 2015] Fit fullrun_ccd3_acisf13830_pi14-548_cl_pass1_src26 appears to have run properly
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Thu Aug 13 15:57:43 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src26.csv
[Thu Aug 13 15:57:43 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Aug 13 15:57:43 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src26.csv
[Thu Aug 13 15:57:43 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:57:53 2015] Spatial fit model total counts = 22.514300, observed total counts = 23.000000
[Thu Aug 13 15:57:53 2015] Offset between fit and detection position for source 28 = 0.026527 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.026527 pixels
  Position = (235.4, 940.1) = 0 47 27.51 -25 16 59.5
  Extent = 0.6 (0.5-0.9)" x 0.3 (0.2-0.4)", rotation angle = 339 (324-358) degrees
  Source counts = 22.6 +/- 4.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Thu Aug 13 15:57:53 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:57:53 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:57:53 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 15:57:53 2015] Source does appear to be extended
[Thu Aug 13 15:57:53 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Thu Aug 13 16:33:17 2015] Writing source region out to fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28_src.reg
[Thu Aug 13 16:33:17 2015] Extracting stamp from image fullrun_ccd3_acisf13830_pi14-548_cl_sm2.00.img.gz, (206, 911) - (264, 969)
[Thu Aug 13 16:33:17 2015] Writing fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28.gif
[Thu Aug 13 16:53:28 2015] Size of ../../acisf13830/products/events/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28_src.evt.gz[events] = 22 counts
[Thu Aug 13 16:53:28 2015] Mean chipx,y = (814.05, 935.77)
[Thu Aug 13 16:53:28 2015] Mean tdetx,y = (4196.23, 3875.05)
[Thu Aug 13 16:53:28 2015] chipx,y range = (794.00-828.00, 914.00-950.00)
[Thu Aug 13 16:53:28 2015] Size of ../../acisf13830/products/events/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 10 counts
[Thu Aug 13 16:53:29 2015] Not generating rmf since there are only 22 counts
[Thu Aug 13 16:53:29 2015] arf not found, will run specextract
[Thu Aug 13 16:54:07 2015] ../../acisf13830/products/spectra/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28.warf not found
[Thu Aug 13 16:54:07 2015] ../../acisf13830/products/spectra/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28.wrmf not found
[Thu Aug 13 16:54:07 2015] Removal of ../../acisf13830/products/spectra/fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28.soff failed
[Thu Aug 13 16:54:15 2015] Spectrum 28 has only 23 counts, deleting rmf
[Thu Aug 13 16:54:15 2015] 192.403
[Thu Aug 13 16:55:14 2015] Updating aperture counts using extracted products
[Thu Aug 13 16:55:14 2015] Total counts from fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28_src.pi.gz = 22.00
[Thu Aug 13 16:55:14 2015] Total counts from fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28_bgd.pi.gz = 10.00
[Thu Aug 13 16:55:14 2015] Got source and background scale factors 0.000001, 0.000015
[Thu Aug 13 16:55:14 2015] User source parameters:
  Position = (235.4, 940.1) = 0 47 27.51 -25 16 59.5
  Extent = 0.6 (0.5-0.9)" x 0.3 (0.2-0.4)", rotation angle = 339 (324-358) degrees
  Source aperture counts = 21.6 +/- 5.8
  Background aperture counts = 0.4
  Rate = 0.001 +/- 0.0003

[Thu Aug 13 16:55:14 2015] Calculating source flux in energy range 0.30-8.00
[Thu Aug 13 16:55:14 2015] Using photon index=1.80, rate=0.00114, arf fullrun_ccd3_acisf13830_pi14-548_pass1_cl_src28.arf
[Thu Aug 13 16:55:14 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Aug 13 16:55:14 2015] Updating source flux to 1.5e-14
[Thu Aug 13 16:55:26 2015] Source 28 has fewer than 100.000000 counts, skipping spectral fitting