[Thu Aug 13 14:34:42 2015] Detection parameters:
  Position = (378.8, 620.3) = 0 47 22.28 -25 19 36.6
  Extent = 0.5" x 0.5", rotation angle = 120 degrees
  Source counts = 12.4 +/- 3.6
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0002

[Thu Aug 13 14:34:43 2015] Off-axis axis estimate = 3.79'
[Thu Aug 13 15:00:18 2015] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Thu Aug 13 15:00:18 2015] Initial guess for spatial extent in simple fitting = 0.77"
[Thu Aug 13 15:00:18 2015] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Thu Aug 13 15:00:18 2015] Giving source the simple spatial ID 30 for pass 0, mean size = 0.77"
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src30.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src30.csv
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src30_1.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src30.csv
[Thu Aug 13 15:21:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src30.csv
[Thu Aug 13 15:21:03 2015] fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Aug 13 15:21:03 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src30.csv
[Thu Aug 13 15:21:03 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13830_pi14-548_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:21:15 2015] Spatial fit model total counts = 12.508500, observed total counts = 14.000000
[Thu Aug 13 15:21:15 2015] Offset between fit and detection position for source 21 = 0.598390 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.598390 pixels
  Position = (379.2, 620.7) = 0 47 22.29 -25 19 36.6
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Thu Aug 13 15:21:15 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:21:15 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:21:15 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 15:21:15 2015] Source does appear to be extended
[Thu Aug 13 15:21:15 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 15:21:15 2015] Deleting source due to low Poisson probability 0.9