[Thu Aug 13 14:33:59 2015] Detection parameters:
  Position = (602.1, 253.6) = 0 47 30.88 -25 14 50.6
  Extent = 0.5" x 0.5", rotation angle = 113 degrees
  Source counts = 14.5 +/- 3.9
  Background counts = 0.5
  Rate = 0.0007 +/- 0.0002

[Thu Aug 13 14:33:59 2015] Off-axis axis estimate = 2.07'
[Thu Aug 13 14:50:21 2015] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Thu Aug 13 14:50:21 2015] Initial guess for spatial extent in simple fitting = 0.44"
[Thu Aug 13 14:50:21 2015] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.779
[Thu Aug 13 14:50:21 2015] Giving source the simple spatial ID 12 for pass 0, mean size = 0.44"
[Thu Aug 13 15:00:17 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass0_src12.ximg exists
[Thu Aug 13 15:00:17 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Aug 13 15:00:17 2015] Fit fullrun_ccd2_acisf13830_pi14-548_cl_pass0_src12 appears to have run properly
[Thu Aug 13 15:00:17 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Aug 13 15:00:17 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Aug 13 15:00:17 2015] Fit fullrun_ccd2_acisf13830_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Aug 13 15:21:10 2015] Spatial fit model total counts = 16.069800, observed total counts = 17.000000
[Thu Aug 13 15:21:10 2015] Offset between fit and detection position for source 10 = 0.702263 pixels
[Thu Aug 13 15:21:10 2015] 16.315900 total counts/ 1.598300 bgd. counts: snr = 11.641471
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.702263 pixels
  Position = (602.6, 254.1) = 0 47 30.88 -25 14 50.6
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 14.7 +/- 4.0
  Background counts = 1.6
  Rate = 0.0007 +/- 0.0002
[Thu Aug 13 15:21:10 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:21:10 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:21:10 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 15:21:10 2015] Source does appear to be extended
[Thu Aug 13 15:21:10 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 15:33:22 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 13 15:33:22 2015] Initial guess for spatial extent in simple fitting = 0.59"
[Thu Aug 13 15:33:22 2015] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.030
[Thu Aug 13 15:33:22 2015] Giving source the simple spatial ID 12 for pass 1, mean size = 0.59"
[Thu Aug 13 15:42:31 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass1_src12.ximg exists
[Thu Aug 13 15:42:31 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13830_pi14-548_cl_pass1_src12.csv
[Thu Aug 13 15:42:31 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Aug 13 15:42:31 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13830_pi14-548_cl_pass1_src12.csv
[Thu Aug 13 15:42:31 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13830_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13830_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:42:31 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Aug 13 15:42:31 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13830_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Aug 13 15:42:31 2015] fullrun_ccd2_acisf13830_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Aug 13 15:42:31 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13830_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Aug 13 15:42:31 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13830_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13830_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 15:57:50 2015] Spatial fit model total counts = 13.576600, observed total counts = 16.000000
[Thu Aug 13 15:57:50 2015] Offset between fit and detection position for source 10 = 0.106958 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.106958 pixels
  Position = (602.5, 254.2) = 0 47 30.88 -25 14 50.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 14.1 +/- 3.8
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Thu Aug 13 15:57:50 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 15:57:50 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 15:57:50 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 15:57:50 2015] Source does appear to be extended
[Thu Aug 13 15:57:50 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 16:19:16 2015] Writing source region out to fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10_src.reg
[Thu Aug 13 16:19:16 2015] Extracting stamp from image fullrun_ccd2_acisf13830_pi14-548_cl_sm2.00.img.gz, (574, 225) - (631, 283)
[Thu Aug 13 16:19:16 2015] Writing fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10.gif
[Thu Aug 13 16:28:04 2015] Size of ../../acisf13830/products/events/fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10_src.evt.gz[events] = 15 counts
[Thu Aug 13 16:28:04 2015] Mean chipx,y = (245.13, 859.07)
[Thu Aug 13 16:28:04 2015] Mean tdetx,y = (3920.07, 3840.87)
[Thu Aug 13 16:28:04 2015] chipx,y range = (225.00-262.00, 842.00-878.00)
[Thu Aug 13 16:28:04 2015] Size of ../../acisf13830/products/events/fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 8 counts
[Thu Aug 13 16:28:05 2015] Not generating rmf since there are only 14 counts
[Thu Aug 13 16:28:05 2015] arf not found, will run specextract
[Thu Aug 13 16:28:42 2015] ../../acisf13830/products/spectra/fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10.warf not found
[Thu Aug 13 16:28:42 2015] ../../acisf13830/products/spectra/fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10.wrmf not found
[Thu Aug 13 16:28:42 2015] Removal of ../../acisf13830/products/spectra/fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10.soff failed
[Thu Aug 13 16:33:16 2015] Spectrum 10 has only 14 counts, deleting rmf
[Thu Aug 13 16:33:16 2015] 178.094
[Thu Aug 13 16:55:08 2015] Updating aperture counts using extracted products
[Thu Aug 13 16:55:08 2015] Total counts from fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10_src.pi.gz = 15.00
[Thu Aug 13 16:55:09 2015] Total counts from fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10_bgd.pi.gz = 8.00
[Thu Aug 13 16:55:09 2015] Got source and background scale factors 0.000001, 0.000014
[Thu Aug 13 16:55:09 2015] User source parameters:
  Position = (602.5, 254.2) = 0 47 30.88 -25 14 50.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source aperture counts = 14.3 +/- 5.0
  Background aperture counts = 0.7
  Rate = 0.0007 +/- 0.0003

[Thu Aug 13 16:55:10 2015] Calculating source flux in energy range 0.30-8.00
[Thu Aug 13 16:55:10 2015] Using photon index=1.80, rate=0.000717, arf fullrun_ccd2_acisf13830_pi14-548_pass1_cl_src10.arf
[Thu Aug 13 16:55:10 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Aug 13 16:55:10 2015] Updating source flux to 9.9e-15
[Thu Aug 13 16:55:22 2015] Source 10 has fewer than 100.000000 counts, skipping spectral fitting