[Fri Jun 28 15:42:13 2013] Detection parameters:
  Position = (300.5, 138.3) = 0 42 52.53 41 18 34.7
  Extent = 0.8" x 0.5", rotation angle = 179 degrees
  Source counts = 20.0 +/- 4.8
  Background counts = 3.0
  Rate = 0.0005 +/- 0.0001

[Fri Jun 28 15:42:14 2013] Off-axis axis estimate = 2.90'
[Fri Jun 28 17:24:32 2013] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 17:24:32 2013] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Jun 28 17:24:32 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.837
[Fri Jun 28 17:24:32 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 0.56"
[Fri Jun 28 18:16:26 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass0_src22.ximg exists
[Fri Jun 28 18:16:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13827_pi14-548_cl_pass0_src22.csv
[Fri Jun 28 18:16:26 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass0_src22_1.ximg exists
[Fri Jun 28 18:16:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13827_pi14-548_cl_pass0_src22.csv
[Fri Jun 28 18:16:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13827_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13827_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 18:16:26 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Fri Jun 28 18:16:26 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Jun 28 18:16:26 2013] Fit fullrun_ccd6_acisf13827_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Jun 28 19:54:30 2013] Spatial fit model total counts = 23.363500, observed total counts = 26.000000
[Fri Jun 28 19:54:30 2013] Offset between fit and detection position for source 10 = 1.150740 pixels
[Fri Jun 28 19:54:30 2013] 22.130760 total counts/ 1.101360 bgd. counts: snr = 20.038363
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.150740 pixels
  Position = (301.4, 139.0) = 0 42 52.51 41 18 34.8
  Extent = 0.9 (0.6-1.3)" x 0.4 (0.3-0.6)", rotation angle = 19 (3-36) degrees
  Source counts = 21.0 +/- 4.7
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001
[Fri Jun 28 19:54:30 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 19:54:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 19:54:30 2013] Assessing source extent using major axis lower bound
[Fri Jun 28 19:54:30 2013] Source does appear to be extended
[Fri Jun 28 19:54:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.12
[Fri Jun 28 21:12:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 28 21:12:59 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Fri Jun 28 21:12:59 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.934
[Fri Jun 28 21:12:59 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 0.64"
[Fri Jun 28 22:01:51 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass1_src22.ximg exists
[Fri Jun 28 22:01:51 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass1_src22_1.ximg exists
[Fri Jun 28 22:01:51 2013] Fit fullrun_ccd6_acisf13827_pi14-548_cl_pass1_src22 appears to have run properly
[Fri Jun 28 22:01:51 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Fri Jun 28 22:01:51 2013] fullrun_ccd6_acisf13827_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jun 28 22:01:51 2013] Fit fullrun_ccd6_acisf13827_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Jun 28 23:28:05 2013] Spatial fit model total counts = 25.701100, observed total counts = 27.000000
[Fri Jun 28 23:28:05 2013] Offset between fit and detection position for source 10 = 0.049032 pixels
[Fri Jun 28 23:28:05 2013] 25.015040 total counts/ 4.976640 bgd. counts: snr = 8.982452
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.049032 pixels
  Position = (301.4, 139.0) = 0 42 52.51 41 18 34.8
  Extent = 0.9 (0.6-1.2)" x 0.4 (0.3-0.6)", rotation angle = 18 (0-37) degrees
  Source counts = 20.0 +/- 5.0
  Background counts = 5.0
  Rate = 0.0005 +/- 0.0001
[Fri Jun 28 23:28:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 23:28:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 23:28:05 2013] Assessing source extent using major axis lower bound
[Fri Jun 28 23:28:05 2013] Source does appear to be extended
[Fri Jun 28 23:28:05 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Fri Jun 28 23:37:55 2013] Writing source region out to fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10_src.reg
[Fri Jun 28 23:37:55 2013] Extracting stamp from image fullrun_ccd6_acisf13827_pi14-548_cl_sm2.00.img.gz, (262, 100) - (340, 178)
[Fri Jun 28 23:37:55 2013] Writing fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10.gif
[Fri Jun 28 23:51:45 2013] Size of ../../acisf13827/products/events/fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10_src.evt.gz[events] = 22 counts
[Fri Jun 28 23:51:45 2013] Mean chipx,y = (968.86, 733.86)
[Fri Jun 28 23:51:45 2013] Mean tdetx,y = (3843.86, 2435.86)
[Fri Jun 28 23:51:45 2013] chipx,y range = (954.00-987.00, 715.00-750.00)
[Fri Jun 28 23:51:45 2013] Size of ../../acisf13827/products/events/fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 76 counts
[Fri Jun 28 23:51:46 2013] Not generating rmf since there are only 20 counts
[Fri Jun 28 23:51:46 2013] arf not found, will run specextract
[Fri Jun 28 23:52:16 2013] ../../acisf13827/products/spectra/fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10.warf not found
[Fri Jun 28 23:52:16 2013] ../../acisf13827/products/spectra/fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10.wrmf not found
[Fri Jun 28 23:52:16 2013] Removal of ../../acisf13827/products/spectra/fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10.soff failed
[Fri Jun 28 23:56:13 2013] Spectrum 10 has only 20 counts, deleting rmf
[Fri Jun 28 23:56:13 2013] 205.252
[Sat Jun 29 00:18:30 2013] Updating aperture counts using extracted products
[Sat Jun 29 00:18:30 2013] Total counts from fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10_src.pi.gz = 22.00
[Sat Jun 29 00:18:30 2013] Total counts from fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10_bgd.pi.gz = 76.00
[Sat Jun 29 00:18:30 2013] Got source and background scale factors 0.000001, 0.000026
[Sat Jun 29 00:18:30 2013] User source parameters:
  Position = (301.4, 139.0) = 0 42 52.51 41 18 34.8
  Extent = 0.9 (0.6-1.2)" x 0.4 (0.3-0.6)", rotation angle = 18 (0-37) degrees
  Source aperture counts = 19.1 +/- 5.8
  Background aperture counts = 2.9
  Rate = 0.0005 +/- 0.0001

[Sat Jun 29 00:18:31 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 00:18:31 2013] Using photon index=1.80, rate=0.000484, arf fullrun_ccd6_acisf13827_pi14-548_pass1_cl_src10.arf
[Sat Jun 29 00:18:31 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 29 00:18:31 2013] Updating source flux to 5.1e-15
[Sat Jun 29 00:19:26 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting