[Fri Jun 14 02:40:08 2013] Detection parameters:
  Position = (512.5, 795.5) = 0 42 45.09 41 15 42.5
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 74.2 +/- 9.1
  Background counts = 7.8
  Rate = 0.002 +/- 0.0002

[Fri Jun 14 02:40:09 2013] Off-axis axis estimate = 0.61'
[Fri Jun 14 07:59:17 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 07:59:17 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Jun 14 07:59:17 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.356
[Fri Jun 14 07:59:17 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 0.39"
[Fri Jun 14 09:34:23 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass0_src54.ximg exists
[Fri Jun 14 09:34:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13825_pi14-548_cl_pass0_src54.csv
[Fri Jun 14 09:34:23 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass0_src54_1.ximg exists
[Fri Jun 14 09:34:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13825_pi14-548_cl_pass0_src54.csv
[Fri Jun 14 09:34:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13825_pi14-548_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13825_pi14-548_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 09:34:24 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass0_tfrozen_src54.ximg exists
[Fri Jun 14 09:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13825_pi14-548_cl_pass0_tfrozen_src54.csv
[Fri Jun 14 09:34:24 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Jun 14 09:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13825_pi14-548_cl_pass0_tfrozen_src54.csv
[Fri Jun 14 09:34:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13825_pi14-548_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13825_pi14-548_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 09:34:45 2013] Source 43 is offset by -0.080317 and -1.864776 pixels which is larger than
2 X fitted extent = 0.594776 x 0.594776, not incorporating fit results
[Fri Jun 14 09:34:45 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 09:34:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 09:34:45 2013] Assessing source extent using major
[Fri Jun 14 09:34:45 2013] Source does appear to be extended
[Fri Jun 14 09:34:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 15:05:25 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 15:05:25 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Jun 14 15:05:25 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.356
[Fri Jun 14 15:05:25 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 0.39"
[Fri Jun 14 16:30:55 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass1_src54.ximg exists
[Fri Jun 14 16:30:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13825_pi14-548_cl_pass1_src54.csv
[Fri Jun 14 16:30:55 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass1_src54_1.ximg exists
[Fri Jun 14 16:30:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13825_pi14-548_cl_pass1_src54.csv
[Fri Jun 14 16:30:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13825_pi14-548_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13825_pi14-548_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 16:30:56 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass1_tfrozen_src54.ximg exists
[Fri Jun 14 16:30:56 2013] fullrun_ccd7_acisf13825_pi14-548_cl_pass1_tfrozen_src54_1.ximg exists
[Fri Jun 14 16:30:56 2013] Fit fullrun_ccd7_acisf13825_pi14-548_cl_pass1_tfrozen_src54 appears to have run properly
[Fri Jun 14 16:31:15 2013] Spatial fit model total counts = 138.669000, observed total counts = 140.000000
[Fri Jun 14 16:31:15 2013] Offset between fit and detection position for source 43 = 0.564083 pixels
[Fri Jun 14 16:31:15 2013] 139.648200 total counts/ 43.921200 bgd. counts: snr = 14.444328
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.564083 pixels
  Position = (512.6, 796.1) = 0 42 45.11 41 15 42.6
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 95.7 +/- 11.8
  Background counts = 43.9
  Rate = 0.002 +/- 0.0003
[Fri Jun 14 16:31:15 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 16:31:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 16:31:15 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 16:31:15 2013] Source does appear to be extended
[Fri Jun 14 16:31:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 17:00:25 2013] Writing source region out to fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43_src.reg
[Fri Jun 14 17:00:25 2013] Extracting stamp from image fullrun_ccd7_acisf13825_pi14-548_cl_sm2.00.img.gz, (498, 781) - (527, 811)
[Fri Jun 14 17:00:25 2013] Writing fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43.gif
[Fri Jun 14 17:17:33 2013] Size of ../../acisf13825/products/events/fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43_src.evt.gz[events] = 105 counts
[Fri Jun 14 17:17:33 2013] Mean chipx,y = (257.18, 535.41)
[Fri Jun 14 17:17:33 2013] Mean tdetx,y = (4174.18, 2237.41)
[Fri Jun 14 17:17:33 2013] chipx,y range = (237.00-277.00, 518.00-552.00)
[Fri Jun 14 17:17:33 2013] Size of ../../acisf13825/products/events/fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 38 counts
[Fri Jun 14 17:17:34 2013] Not generating rmf since there are only 95 counts
[Fri Jun 14 17:17:34 2013] arf not found, will run specextract
[Fri Jun 14 17:17:42 2013] ../../acisf13825/products/spectra/fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43.warf not found
[Fri Jun 14 17:17:42 2013] ../../acisf13825/products/spectra/fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43.wrmf not found
[Fri Jun 14 17:17:42 2013] Removal of ../../acisf13825/products/spectra/fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43.soff failed
[Fri Jun 14 17:24:35 2013] Spectrum 43 has only 96 counts, deleting rmf
[Fri Jun 14 17:24:35 2013] 225.656
[Fri Jun 14 17:24:56 2013] Updating aperture counts using extracted products
[Fri Jun 14 17:24:56 2013] Total counts from fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43_src.pi.gz = 105.00
[Fri Jun 14 17:24:56 2013] Total counts from fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43_bgd.pi.gz = 38.00
[Fri Jun 14 17:24:56 2013] Got source and background scale factors 0.000000, 0.000004
[Fri Jun 14 17:24:56 2013] User source parameters:
  Position = (512.6, 796.1) = 0 42 45.11 41 15 42.6
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source aperture counts = 101.8 +/- 11.3
  Background aperture counts = 3.2
  Rate = 0.003 +/- 0.0003

[Fri Jun 14 17:25:00 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 17:25:00 2013] Using photon index=1.80, rate=0.00241, arf fullrun_ccd7_acisf13825_pi14-548_pass1_cl_src43.arf
[Fri Jun 14 17:25:00 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Jun 14 17:25:00 2013] Updating source flux to 2e-14
[Fri Jun 14 17:26:31 2013] Flag b found in src. 43 procflags, skipping spectral fitting
[Fri Jun 14 17:26:31 2013] Source 43 has fewer than 100.000000 counts, skipping spectral fitting