[Mon May 13 21:10:14 2013] Detection parameters:
  Position = (860.1, 506.0) = 10 5 29.73 -7 41 20.8
  Extent = 0.9" x 0.5", rotation angle = 18 degrees
  Source counts = 10.6 +/- 3.7
  Background counts = 3.4
  Rate = 7e-05 +/- 2e-05

[Mon May 13 21:10:14 2013] Off-axis axis estimate = 4.21'
[Mon May 13 21:43:38 2013] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Mon May 13 21:43:38 2013] Initial guess for spatial extent in simple fitting = 0.90"
[Mon May 13 21:43:38 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.743
[Mon May 13 21:43:38 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 0.90"
[Mon May 13 22:17:39 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src27.ximg exists
[Mon May 13 22:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src27.csv
[Mon May 13 22:17:39 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src27_1.ximg exists
[Mon May 13 22:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src27.csv
[Mon May 13 22:17:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 22:17:40 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Mon May 13 22:17:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src27.csv
[Mon May 13 22:17:40 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Mon May 13 22:17:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src27.csv
[Mon May 13 22:17:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 00:40:10 2013] Spatial fit model total counts = 13.643900, observed total counts = 17.000000
[Tue May 14 00:40:10 2013] Offset between fit and detection position for source 24 = 0.616285 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.616285 pixels
  Position = (860.4, 506.5) = 10 5 29.74 -7 41 20.8
  Extent = 1.3 (0.9-1.8)" x 0.6 (0.4-0.9)", rotation angle = 342 (320-4) degrees
  Source counts = 13.5 +/- 3.7
  Background counts = 0.0
  Rate = 9e-05 +/- 2e-05
[Tue May 14 00:40:10 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:40:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:40:10 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:40:10 2013] Source does appear to be extended
[Tue May 14 00:40:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Tue May 14 01:05:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 01:05:00 2013] Initial guess for spatial extent in simple fitting = 0.93"
[Tue May 14 01:05:00 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093
[Tue May 14 01:05:00 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 0.93"
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src27.ximg exists
[Tue May 14 01:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src27.csv
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src27_1.ximg exists
[Tue May 14 01:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src27.csv
[Tue May 14 01:45:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue May 14 01:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src27.csv
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue May 14 01:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src27.csv
[Tue May 14 01:45:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes