[Mon May 13 21:10:14 2013] Detection parameters:
  Position = (1085.7, 385.9) = 10 5 22.26 -7 42 19.9
  Extent = 0.7" x 0.5", rotation angle = 96 degrees
  Source counts = 10.2 +/- 3.6
  Background counts = 2.8
  Rate = 6e-05 +/- 2e-05

[Mon May 13 21:10:14 2013] Off-axis axis estimate = 2.14'
[Mon May 13 21:43:38 2013] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Mon May 13 21:43:38 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Mon May 13 21:43:38 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.141
[Mon May 13 21:43:38 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 0.44"
[Mon May 13 22:17:39 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src28.ximg exists
[Mon May 13 22:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src28.csv
[Mon May 13 22:17:39 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src28_1.ximg exists
[Mon May 13 22:17:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src28.csv
[Mon May 13 22:17:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13821_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 22:17:40 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon May 13 22:17:40 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 13 22:17:40 2013] Fit fullrun_ccd6_acisf13821_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Tue May 14 00:40:10 2013] Spatial fit model total counts = 15.846100, observed total counts = 17.000000
[Tue May 14 00:40:10 2013] Offset between fit and detection position for source 23 = 0.983673 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.983673 pixels
  Position = (1086.3, 386.7) = 10 5 22.26 -7 42 19.8
  Extent = 1.3 (1.2-1.3)" x 0.7 (0.5-1.0)", rotation angle = 85 (43-114) degrees
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.0001 +/- 2e-05
[Tue May 14 00:40:10 2013] Vigneting correction estimate = 1.000000
[Tue May 14 00:40:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 00:40:10 2013] Assessing source extent using major axis lower bound
[Tue May 14 00:40:10 2013] Source does appear to be extended
[Tue May 14 00:40:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Tue May 14 01:05:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 01:05:00 2013] Initial guess for spatial extent in simple fitting = 1.02"
[Tue May 14 01:05:00 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Tue May 14 01:05:00 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 1.02"
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src28.ximg exists
[Tue May 14 01:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src28.csv
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src28_1.ximg exists
[Tue May 14 01:45:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src28.csv
[Tue May 14 01:45:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13821_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Tue May 14 01:45:51 2013] fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Tue May 14 01:45:51 2013] Fit fullrun_ccd6_acisf13821_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly