[Sun May 12 12:07:07 2013] Detection parameters:
  Position = (667.9, 816.1) = 22 3 25.97 -35 0 22.8
  Extent = 0.7" x 0.5", rotation angle = 158 degrees
  Source counts = 15.1 +/- 4.0
  Background counts = 0.9
  Rate = 0.0003 +/- 8e-05

[Sun May 12 12:07:07 2013] Off-axis axis estimate = 3.81'
[Sun May 12 13:53:23 2013] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Sun May 12 13:53:23 2013] Initial guess for spatial extent in simple fitting = 0.77"
[Sun May 12 13:53:23 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.931
[Sun May 12 13:53:23 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.77"
[Sun May 12 14:04:56 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass0_src7.ximg exists
[Sun May 12 14:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13809_pi14-548_cl_pass0_src7.csv
[Sun May 12 14:04:56 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass0_src7_1.ximg exists
[Sun May 12 14:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13809_pi14-548_cl_pass0_src7.csv
[Sun May 12 14:04:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13809_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13809_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:04:56 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun May 12 14:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13809_pi14-548_cl_pass0_tfrozen_src7.csv
[Sun May 12 14:04:56 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 12 14:04:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13809_pi14-548_cl_pass0_tfrozen_src7.csv
[Sun May 12 14:04:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13809_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13809_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 14:31:48 2013] Spatial fit model total counts = 24.901600, observed total counts = 27.000000
[Sun May 12 14:31:48 2013] Offset between fit and detection position for source 5 = 0.859897 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.859897 pixels
  Position = (668.4, 815.3) = 22 3 25.97 -35 0 23.4
  Extent = 0.9 (0.8-1.3)", rotation angle = 0
  Source counts = 25.7 +/- 5.1
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sun May 12 14:31:48 2013] Vigneting correction estimate = 1.000000
[Sun May 12 14:31:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 14:31:48 2013] Assessing source extent using major axis lower bound
[Sun May 12 14:31:48 2013] Source does appear to be extended
[Sun May 12 14:31:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 16:38:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 16:38:52 2013] Initial guess for spatial extent in simple fitting = 0.93"
[Sun May 12 16:38:52 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Sun May 12 16:38:52 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.93"
[Sun May 12 16:51:42 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass1_src7.ximg exists
[Sun May 12 16:51:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13809_pi14-548_cl_pass1_src7.csv
[Sun May 12 16:51:42 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass1_src7_1.ximg exists
[Sun May 12 16:51:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13809_pi14-548_cl_pass1_src7.csv
[Sun May 12 16:51:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13809_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13809_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 16:51:42 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun May 12 16:51:42 2013] fullrun_ccd6_acisf13809_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 12 16:51:42 2013] Fit fullrun_ccd6_acisf13809_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 12 17:15:54 2013] Spatial fit model total counts = 27.930500, observed total counts = 28.000000
[Sun May 12 17:15:54 2013] Offset between fit and detection position for source 5 = 0.168357 pixels
[Sun May 12 17:15:54 2013] 28.451280 total counts/ 6.841180 bgd. counts: snr = 8.262116
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.168357 pixels
  Position = (668.3, 815.5) = 22 3 25.98 -35 0 23.4
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 21.6 +/- 5.3
  Background counts = 6.8
  Rate = 0.0004 +/- 0.0001
[Sun May 12 17:15:54 2013] Vigneting correction estimate = 1.000000
[Sun May 12 17:15:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 17:15:54 2013] Assessing source extent using major axis lower bound
[Sun May 12 17:15:54 2013] Source does appear to be extended
[Sun May 12 17:15:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 17:22:24 2013] Writing source region out to fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5_src.reg
[Sun May 12 17:22:24 2013] Extracting stamp from image fullrun_ccd6_acisf13809_pi14-548_cl_sm2.00.img.gz, (628, 775) - (708, 856)
[Sun May 12 17:22:24 2013] Writing fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5.gif
[Sun May 12 17:26:27 2013] Size of ../../acisf13809/products/events/fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5_src.evt.gz[events] = 25 counts
[Sun May 12 17:26:27 2013] Mean chipx,y = (774.12, 586.96)
[Sun May 12 17:26:27 2013] Mean tdetx,y = (3649.12, 2288.96)
[Sun May 12 17:26:27 2013] chipx,y range = (753.00-791.00, 571.00-605.00)
[Sun May 12 17:26:27 2013] Size of ../../acisf13809/products/events/fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 18 counts
[Sun May 12 17:26:28 2013] Not generating rmf since there are only 21 counts
[Sun May 12 17:26:28 2013] arf not found, will run specextract
[Sun May 12 17:26:57 2013] ../../acisf13809/products/spectra/fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5.warf not found
[Sun May 12 17:26:57 2013] ../../acisf13809/products/spectra/fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5.wrmf not found
[Sun May 12 17:26:57 2013] Removal of ../../acisf13809/products/spectra/fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5.soff failed
[Sun May 12 17:28:23 2013] Spectrum 5 has only 22 counts, deleting rmf
[Sun May 12 17:28:23 2013] 191.39
[Sun May 12 17:35:18 2013] Updating aperture counts using extracted products
[Sun May 12 17:35:18 2013] Total counts from fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5_src.pi.gz = 25.00
[Sun May 12 17:35:18 2013] Total counts from fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5_bgd.pi.gz = 18.00
[Sun May 12 17:35:18 2013] Got source and background scale factors 0.000002, 0.000028
[Sun May 12 17:35:18 2013] User source parameters:
  Position = (668.3, 815.5) = 22 3 25.98 -35 0 23.4
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source aperture counts = 23.5 +/- 6.1
  Background aperture counts = 1.5
  Rate = 0.0005 +/- 0.0001

[Sun May 12 17:35:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 17:35:19 2013] Using photon index=1.80, rate=0.00043, arf fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5.arf
[Sun May 12 17:35:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 12 17:35:19 2013] Updating source flux to 5e-15
[Sun May 12 17:35:42 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 17:35:43 2013] acisf13809/analysis//spectral/fullrun_ccd6_acisf13809_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete