[Fri Aug 16 08:43:51 2013] Detection parameters:
  Position = (488.6, 731.2) = 9 55 29.30 69 42 12.4
  Extent = 0.5" x 0.5", rotation angle = 172 degrees
  Source counts = 14.4 +/- 4.0
  Background counts = 1.6
  Rate = 0.0007 +/- 0.0002

[Fri Aug 16 08:43:51 2013] Off-axis axis estimate = 2.17'
[Fri Aug 16 09:40:22 2013] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Aug 16 09:40:22 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Aug 16 09:40:22 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.131
[Fri Aug 16 09:40:22 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 0.45"
[Fri Aug 16 10:47:02 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src53.ximg exists
[Fri Aug 16 10:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src53.csv
[Fri Aug 16 10:47:02 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src53_1.ximg exists
[Fri Aug 16 10:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src53.csv
[Fri Aug 16 10:47:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 16 10:47:03 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src53.ximg exists
[Fri Aug 16 10:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src53.csv
[Fri Aug 16 10:47:03 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Aug 16 10:47:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src53.csv
[Fri Aug 16 10:47:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 16 10:47:15 2013] Spatial fit model total counts = 20.723700, observed total counts = 23.000000
[Fri Aug 16 10:47:15 2013] Offset between fit and detection position for source 57 = 0.642876 pixels
[Fri Aug 16 10:47:15 2013] 19.305370 total counts/ 3.902170 bgd. counts: snr = 7.797544
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.642876 pixels
  Position = (488.9, 731.7) = 9 55 29.31 69 42 12.4
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 15.4 +/- 4.4
  Background counts = 3.9
  Rate = 0.0008 +/- 0.0002
[Fri Aug 16 10:47:15 2013] Vigneting correction estimate = 1.000000
[Fri Aug 16 10:47:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 16 10:47:15 2013] Assessing source extent using major axis lower bound
[Fri Aug 16 10:47:15 2013] Source does appear to be extended
[Fri Aug 16 10:47:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 16 10:47:15 2013] Deleting source due to low Poisson probability 0.8