[Fri Aug 16 08:43:50 2013] Detection parameters:
  Position = (274.8, 551.3) = 9 55 49.51 69 40 44.0
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 31.4 +/- 9.8
  Background counts = 64.6
  Rate = 0.002 +/- 0.0005

[Fri Aug 16 08:43:51 2013] Off-axis axis estimate = 0.14'
[Fri Aug 16 09:40:22 2013] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Aug 16 09:40:22 2013] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Aug 16 09:40:22 2013] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.239
[Fri Aug 16 09:40:22 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 0.42"
[Fri Aug 16 10:47:02 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src39.ximg exists
[Fri Aug 16 10:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src39.csv
[Fri Aug 16 10:47:02 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src39_1.ximg exists
[Fri Aug 16 10:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src39.csv
[Fri Aug 16 10:47:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13796_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 16 10:47:02 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Fri Aug 16 10:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src39.csv
[Fri Aug 16 10:47:02 2013] fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Aug 16 10:47:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src39.csv
[Fri Aug 16 10:47:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13796_pi14-548_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 16 10:47:15 2013] Source 24 is offset by 3.145960 and -4.048060 pixels which is larger than
2 X fitted extent = 0.423886 x 0.423886, not incorporating fit results
[Fri Aug 16 10:47:15 2013] Vigneting correction estimate = 1.000000
[Fri Aug 16 10:47:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 16 10:47:15 2013] Assessing source extent using major
[Fri Aug 16 10:47:15 2013] Source does appear to be extended
[Fri Aug 16 10:47:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 16 10:47:15 2013] Deleting source due to low Poisson probability 0.9