[Wed Jul  8 05:26:35 2015] Detection parameters:
  Position = (1033.5, 709.5) = 8 55 31.30 -46 45 19.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 11.7 +/- 3.9
  Background counts = 3.3
  Rate = 0.0003 +/- 0.0001

[Wed Jul  8 05:26:35 2015] Off-axis axis estimate = 1.36'
[Wed Jul  8 05:27:51 2015] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Jul  8 05:27:51 2015] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Jul  8 05:27:51 2015] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.605
[Wed Jul  8 05:27:51 2015] Giving source the simple spatial ID 14 for pass 0, mean size = 0.39"
[Wed Jul  8 05:27:52 2015] fullrun_ccd7_acisf13780_pi14-548_cl_pass0_src14.ximg exists
[Wed Jul  8 05:27:52 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13780_pi14-548_cl_pass0_src14.csv
[Wed Jul  8 05:27:52 2015] fullrun_ccd7_acisf13780_pi14-548_cl_pass0_src14_1.ximg exists
[Wed Jul  8 05:27:52 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13780_pi14-548_cl_pass0_src14.csv
[Wed Jul  8 05:27:52 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13780_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13780_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  8 05:27:55 2015] fullrun_ccd7_acisf13780_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Wed Jul  8 05:27:55 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13780_pi14-548_cl_pass0_tfrozen_src14.csv
[Wed Jul  8 05:27:55 2015] fullrun_ccd7_acisf13780_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jul  8 05:27:55 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13780_pi14-548_cl_pass0_tfrozen_src14.csv
[Wed Jul  8 05:27:55 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13780_pi14-548_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13780_pi14-548_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  8 05:28:01 2015] Spatial fit model total counts = 43.330100, observed total counts = 51.000000
[Wed Jul  8 05:28:01 2015] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul  8 05:28:01 2015] Vigneting correction estimate = 1.000000
[Wed Jul  8 05:28:01 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  8 05:28:01 2015] Assessing source extent using major
[Wed Jul  8 05:28:01 2015] Source does appear to be extended
[Wed Jul  8 05:28:01 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  8 05:28:01 2015] Deleting source due to low Poisson probability 0.9