[Wed Jul 31 09:03:01 2013] Detection parameters:
  Position = (318.9, 964.6) = 14 24 40.29 46 26 50.6
  Extent = 7.6" x 5.1", rotation angle = 32 degrees
  Source counts = 79.7 +/- 11.6
  Background counts = 55.3
  Rate = 0.002 +/- 0.0003

[Wed Jul 31 09:03:01 2013] Off-axis axis estimate = 13.26'
[Wed Jul 31 09:07:00 2013] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Wed Jul 31 09:07:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 31 09:07:00 2013] Initial guess for spatial extent in simple fitting = 7.89"
[Wed Jul 31 09:07:00 2013] source mask rpix=16.0, npix_max = 1093, mask sum = 1089, frac = 0.996
[Wed Jul 31 09:07:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.89"
[Wed Jul 31 09:29:26 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass0_src1.ximg exists
[Wed Jul 31 09:29:26 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Jul 31 09:29:26 2013] Fit fullrun_ccd3_acisf13772_pi14-548_cl_pass0_src1 appears to have run properly
[Wed Jul 31 09:29:26 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 31 09:29:26 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 31 09:29:26 2013] Fit fullrun_ccd3_acisf13772_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 31 10:08:56 2013] Spatial fit model total counts = 201.454000, observed total counts = 189.000000
[Wed Jul 31 10:08:56 2013] Offset between fit and detection position for source 1 = 4.526717 pixels
[Wed Jul 31 10:08:56 2013] 200.991200 total counts/ 99.949200 bgd. counts: snr = 10.106767
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.526717 pixels
  Position = (322.3, 967.6) = 14 24 40.16 46 26 51.9
  Extent = 8.5 (4.9-8.0)" x 6.2 (6.0-9.9)", rotation angle = 136 (90-90) degrees
  Source counts = 101.0 +/- 14.2
  Background counts = 99.9
  Rate = 0.003 +/- 0.0004
[Wed Jul 31 10:08:56 2013] Vigneting correction estimate = 1.000000
[Wed Jul 31 10:08:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 31 10:08:56 2013] Assessing source extent using major axis lower bound
[Wed Jul 31 10:08:56 2013] Source does appear to be extended
[Wed Jul 31 10:08:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.49
[Wed Jul 31 10:09:11 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 31 10:09:11 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 31 10:09:11 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Jul 31 10:09:11 2013] source mask rpix=15.0, npix_max = 960, mask sum = 961, frac = 1.001
[Wed Jul 31 10:09:11 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.38"
[Wed Jul 31 10:23:51 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass1_src1.ximg exists
[Wed Jul 31 10:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13772_pi14-548_cl_pass1_src1.csv
[Wed Jul 31 10:23:51 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Jul 31 10:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13772_pi14-548_cl_pass1_src1.csv
[Wed Jul 31 10:23:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13772_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13772_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 10:23:51 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 31 10:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13772_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed Jul 31 10:23:51 2013] fullrun_ccd3_acisf13772_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 31 10:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13772_pi14-548_cl_pass1_tfrozen_src1.csv
[Wed Jul 31 10:23:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13772_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13772_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 31 11:00:18 2013] Warning, spatial fit 1 centroid is now closest to src. 18
[Wed Jul 31 11:00:18 2013] Source 1 in spatial fitting is no longer close to this source
[Wed Jul 31 11:00:18 2013] Vigneting correction estimate = 1.000000
[Wed Jul 31 11:00:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 31 11:00:18 2013] Assessing source extent using major axis lower bound
[Wed Jul 31 11:00:18 2013] Source does appear to be extended
[Wed Jul 31 11:00:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.49
[Wed Jul 31 11:00:33 2013] Writing source region out to fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1_src.reg
[Wed Jul 31 11:00:33 2013] Extracting stamp from image fullrun_ccd3_acisf13772_pi14-548_cl_sm2.00.img.gz, (0, 578) - (712, 1357)
[Wed Jul 31 11:00:33 2013] Writing fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1.gif
[Wed Jul 31 11:00:35 2013] Size of ../../acisf13772/products/events/fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1_src.evt.gz[events] = 160 counts
[Wed Jul 31 11:00:35 2013] Mean chipx,y = (445.27, 51.84)
[Wed Jul 31 11:00:35 2013] Mean tdetx,y = (5080.16, 3506.27)
[Wed Jul 31 11:00:35 2013] chipx,y range = (388.00-508.00, 4.00-117.00)
[Wed Jul 31 11:00:35 2013] Size of ../../acisf13772/products/events/fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 684 counts
[Wed Jul 31 11:00:36 2013] rmf not found, will run specextract
[Wed Jul 31 11:00:36 2013] arf not found, will run specextract
[Wed Jul 31 11:00:44 2013] ../../acisf13772/products/spectra/fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1.warf not found
[Wed Jul 31 11:00:44 2013] ../../acisf13772/products/spectra/fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1.wrmf not found
[Wed Jul 31 11:00:44 2013] Removal of ../../acisf13772/products/spectra/fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1.soff failed
[Wed Jul 31 11:01:23 2013] Keeping rmf generated by specextract
[Wed Jul 31 11:01:23 2013] 148.29
[Wed Jul 31 11:12:44 2013] Updating aperture counts using extracted products
[Wed Jul 31 11:12:44 2013] Total counts from fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1_src.pi.gz = 160.00
[Wed Jul 31 11:12:45 2013] Total counts from fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1_bgd.pi.gz = 684.00
[Wed Jul 31 11:12:45 2013] Got source and background scale factors 0.000164, 0.002649
[Wed Jul 31 11:12:45 2013] User source parameters:
  Position = (322.3, 967.6) = 14 24 40.16 46 26 51.9
  Extent = 8.5 (4.9-8.0)" x 6.2 (6.0-9.9)", rotation angle = 136 (90-90) degrees
  Source aperture counts = 117.6 +/- 13.7
  Background aperture counts = 42.4
  Rate = 0.003 +/- 0.0004

[Wed Jul 31 11:12:45 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul 31 11:12:45 2013] Using photon index=1.80, rate=0.00284, arf fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1.arf
[Wed Jul 31 11:12:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jul 31 11:12:45 2013] Updating source flux to 4.6e-14
[Wed Jul 31 11:12:55 2013] Reading fit data from acisf13772/analysis//spectral/fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1_pl.csv
[Wed Jul 31 11:12:55 2013] Spectral fit parameter nH value = 4.78358e+21
[Wed Jul 31 11:12:55 2013] Spectral fit parameter PhoIndex value = 2.77111
[Wed Jul 31 11:12:55 2013] Failed to get F(0.3-8.0) from acisf13772/analysis//spectral/fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 31 11:12:55 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul 31 11:12:55 2013] Using Nh = 4.8e+21, photon index=2.77, rate=0.00284, arf fullrun_ccd3_acisf13772_pi14-548_pass1_cl_src1.arf
[Wed Jul 31 11:12:55 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jul 31 11:12:55 2013] Updating source flux to 3.2e-14