[Sun Jun  2 22:19:37 2013] Detection parameters:
  Position = (911.7, 540.6) = 15 54 46.25 -55 2 19.9
  Extent = 0.7" x 0.7", rotation angle = 156 degrees
  Source counts = 27.0 +/- 5.7
  Background counts = 5.0
  Rate = 0.0002 +/- 4e-05

[Sun Jun  2 22:19:38 2013] Off-axis axis estimate = 3.65'
[Mon Jun  3 00:34:56 2013] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:34:56 2013] Initial guess for spatial extent in simple fitting = 0.73"
[Mon Jun  3 00:34:56 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Mon Jun  3 00:34:56 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 0.73"
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src24.ximg exists
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src24_1.ximg exists
[Mon Jun  3 01:41:43 2013] Fit fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src24 appears to have run properly
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jun  3 01:41:43 2013] Fit fullrun_ccd2_acisf13768_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Jun  3 02:37:05 2013] Spatial fit model total counts = 32.849100, observed total counts = 35.000000
[Mon Jun  3 02:37:05 2013] Offset between fit and detection position for source 25 = 0.141356 pixels
[Mon Jun  3 02:37:05 2013] 34.353930 total counts/ 8.391630 bgd. counts: snr = 8.962311
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.141356 pixels
  Position = (911.7, 540.8) = 15 54 46.28 -55 2 20.0
  Extent = 0.8 (0.6-1.1)" x 0.5 (0.4-0.7)", rotation angle = 3 (292-52) degrees
  Source counts = 26.0 +/- 5.9
  Background counts = 8.4
  Rate = 0.0002 +/- 4e-05
[Mon Jun  3 02:37:06 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 02:37:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 02:37:06 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 02:37:06 2013] Source does appear to be extended
[Mon Jun  3 02:37:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.88
[Mon Jun  3 04:42:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  3 04:42:05 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Mon Jun  3 04:42:05 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.234
[Mon Jun  3 04:42:05 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 0.64"
[Mon Jun  3 05:44:16 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src24.ximg exists
[Mon Jun  3 05:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src24.csv
[Mon Jun  3 05:44:16 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src24_1.ximg exists
[Mon Jun  3 05:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src24.csv
[Mon Jun  3 05:44:16 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 05:44:17 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Mon Jun  3 05:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src24.csv
[Mon Jun  3 05:44:17 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Jun  3 05:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src24.csv
[Mon Jun  3 05:44:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 06:28:48 2013] Spatial fit model total counts = 29.451800, observed total counts = 35.000000
[Mon Jun  3 06:28:48 2013] Offset between fit and detection position for source 25 = 0.070760 pixels
[Mon Jun  3 06:28:48 2013] 31.713570 total counts/ 6.567170 bgd. counts: snr = 9.812659
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.070760 pixels
  Position = (911.6, 540.7) = 15 54 46.28 -55 2 20.0
  Extent = 0.8 (0.4-0.9)" x 0.5 (0.4-0.7)", rotation angle = 3 (317-6) degrees
  Source counts = 25.1 +/- 5.6
  Background counts = 6.6
  Rate = 0.0002 +/- 4e-05
[Mon Jun  3 06:28:48 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 06:28:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 06:28:48 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 06:28:48 2013] Source does appear to be extended
[Mon Jun  3 06:28:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.57
[Mon Jun  3 07:28:40 2013] Writing source region out to fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25_src.reg
[Mon Jun  3 07:28:40 2013] Extracting stamp from image fullrun_ccd2_acisf13768_pi14-548_cl_sm2.00.img.gz, (876, 505) - (947, 576)
[Mon Jun  3 07:28:40 2013] Writing fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25.gif
[Mon Jun  3 07:42:35 2013] Size of ../../acisf13768/products/events/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25_src.evt.gz[events] = 28 counts
[Mon Jun  3 07:42:35 2013] Mean chipx,y = (478.07, 874.46)
[Mon Jun  3 07:42:35 2013] Mean tdetx,y = (3935.46, 3607.93)
[Mon Jun  3 07:42:35 2013] chipx,y range = (458.00-494.00, 857.00-890.00)
[Mon Jun  3 07:42:35 2013] Size of ../../acisf13768/products/events/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 82 counts
[Mon Jun  3 07:42:36 2013] Not generating rmf since there are only 25 counts
[Mon Jun  3 07:42:36 2013] arf not found, will run specextract
[Mon Jun  3 07:43:06 2013] ../../acisf13768/products/spectra/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25.warf not found
[Mon Jun  3 07:43:06 2013] ../../acisf13768/products/spectra/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25.wrmf not found
[Mon Jun  3 07:43:06 2013] Removal of ../../acisf13768/products/spectra/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25.soff failed
[Mon Jun  3 08:05:57 2013] Spectrum 25 has only 25 counts, deleting rmf
[Mon Jun  3 08:05:57 2013] 185.453
[Mon Jun  3 08:31:18 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:31:18 2013] Total counts from fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25_src.pi.gz = 28.00
[Mon Jun  3 08:31:19 2013] Total counts from fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25_bgd.pi.gz = 82.00
[Mon Jun  3 08:31:19 2013] Got source and background scale factors 0.000001, 0.000022
[Mon Jun  3 08:31:19 2013] User source parameters:
  Position = (911.6, 540.7) = 15 54 46.28 -55 2 20.0
  Extent = 0.8 (0.4-0.9)" x 0.5 (0.4-0.7)", rotation angle = 3 (317-6) degrees
  Source aperture counts = 23.5 +/- 6.4
  Background aperture counts = 4.5
  Rate = 0.0001 +/- 4e-05

[Mon Jun  3 08:31:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:31:24 2013] Using photon index=1.80, rate=0.000158, arf fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src25.arf
[Mon Jun  3 08:31:24 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 08:31:24 2013] Updating source flux to 2.7e-15
[Mon Jun  3 08:32:08 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting