[Sun Jun  2 22:19:37 2013] Detection parameters:
  Position = (482.4, 296.2) = 15 55 10.85 -55 4 19.8
  Extent = 0.8" x 0.5", rotation angle = 57 degrees
  Source counts = 24.6 +/- 5.4
  Background counts = 4.4
  Rate = 0.0002 +/- 3e-05

[Sun Jun  2 22:19:38 2013] Off-axis axis estimate = 5.38'
[Mon Jun  3 00:34:56 2013] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 00:34:56 2013] Initial guess for spatial extent in simple fitting = 1.34"
[Mon Jun  3 00:34:56 2013] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.821
[Mon Jun  3 00:34:56 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 1.34"
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src30.ximg exists
[Mon Jun  3 01:41:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src30.csv
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src30_1.ximg exists
[Mon Jun  3 01:41:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src30.csv
[Mon Jun  3 01:41:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13768_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Mon Jun  3 01:41:43 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jun  3 01:41:43 2013] Fit fullrun_ccd2_acisf13768_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Jun  3 02:37:05 2013] Spatial fit model total counts = 47.563800, observed total counts = 53.000000
[Mon Jun  3 02:37:05 2013] Offset between fit and detection position for source 13 = 0.393109 pixels
[Mon Jun  3 02:37:05 2013] 46.147300 total counts/ 23.336900 bgd. counts: snr = 4.721841
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.393109 pixels
  Position = (482.8, 296.1) = 15 55 10.86 -55 4 20.1
  Extent = 0.9 (0.6-1.3)" x 0.5 (0.3-0.8)", rotation angle = 156 (124-187) degrees
  Source counts = 22.8 +/- 6.8
  Background counts = 23.3
  Rate = 0.0001 +/- 4e-05
[Mon Jun  3 02:37:06 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 02:37:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 02:37:06 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 02:37:06 2013] Source does appear to be extended
[Mon Jun  3 02:37:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80
[Mon Jun  3 04:42:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  3 04:42:05 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Jun  3 04:42:05 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.191
[Mon Jun  3 04:42:05 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 0.66"
[Mon Jun  3 05:44:16 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src30.ximg exists
[Mon Jun  3 05:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src30.csv
[Mon Jun  3 05:44:16 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src30_1.ximg exists
[Mon Jun  3 05:44:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src30.csv
[Mon Jun  3 05:44:16 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13768_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 05:44:17 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Mon Jun  3 05:44:17 2013] fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Jun  3 05:44:17 2013] Fit fullrun_ccd2_acisf13768_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Mon Jun  3 06:28:48 2013] Spatial fit model total counts = 47.583200, observed total counts = 53.000000
[Mon Jun  3 06:28:48 2013] Offset between fit and detection position for source 13 = 0.024527 pixels
[Mon Jun  3 06:28:48 2013] 46.179400 total counts/ 23.530600 bgd. counts: snr = 4.669052
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.024527 pixels
  Position = (482.8, 296.1) = 15 55 10.86 -55 4 20.1
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.7)", rotation angle = 341
  Source counts = 22.6 +/- 6.8
  Background counts = 23.5
  Rate = 0.0001 +/- 4e-05
[Mon Jun  3 06:28:48 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 06:28:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 06:28:48 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 06:28:48 2013] Source does appear to be extended
[Mon Jun  3 06:28:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80
[Mon Jun  3 07:28:40 2013] Writing source region out to fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13_src.reg
[Mon Jun  3 07:28:40 2013] Extracting stamp from image fullrun_ccd2_acisf13768_pi14-548_cl_sm2.00.img.gz, (444, 257) - (522, 335)
[Mon Jun  3 07:28:40 2013] Writing fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13.gif
[Mon Jun  3 07:45:59 2013] Size of ../../acisf13768/products/events/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13_src.evt.gz[events] = 28 counts
[Mon Jun  3 07:45:59 2013] Mean chipx,y = (259.93, 426.61)
[Mon Jun  3 07:45:59 2013] Mean tdetx,y = (3487.61, 3826.07)
[Mon Jun  3 07:45:59 2013] chipx,y range = (244.00-277.00, 404.00-448.00)
[Mon Jun  3 07:45:59 2013] Size of ../../acisf13768/products/events/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 98 counts
[Mon Jun  3 07:46:00 2013] Not generating rmf since there are only 22 counts
[Mon Jun  3 07:46:00 2013] arf not found, will run specextract
[Mon Jun  3 07:46:26 2013] ../../acisf13768/products/spectra/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13.warf not found
[Mon Jun  3 07:46:26 2013] ../../acisf13768/products/spectra/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13.wrmf not found
[Mon Jun  3 07:46:26 2013] Removal of ../../acisf13768/products/spectra/fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13.soff failed
[Mon Jun  3 08:05:57 2013] Spectrum 13 has only 23 counts, deleting rmf
[Mon Jun  3 08:05:57 2013] 173.935
[Mon Jun  3 08:31:19 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:31:19 2013] Total counts from fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13_src.pi.gz = 28.00
[Mon Jun  3 08:31:19 2013] Total counts from fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13_bgd.pi.gz = 98.00
[Mon Jun  3 08:31:19 2013] Got source and background scale factors 0.000001, 0.000026
[Mon Jun  3 08:31:19 2013] User source parameters:
  Position = (482.8, 296.1) = 15 55 10.86 -55 4 20.1
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.7)", rotation angle = 341
  Source aperture counts = 23.7 +/- 6.4
  Background aperture counts = 4.3
  Rate = 0.0001 +/- 4e-05

[Mon Jun  3 08:31:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:31:24 2013] Using photon index=1.80, rate=0.000142, arf fullrun_ccd2_acisf13768_pi14-548_pass1_cl_src13.arf
[Mon Jun  3 08:31:24 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 08:31:24 2013] Updating source flux to 2.6e-15
[Mon Jun  3 08:32:08 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting