[Sun Jun  2 22:19:12 2013] Detection parameters:
  Position = (154.4, 598.2) = 15 54 26.27 -55 9 51.3
  Extent = 0.8" x 0.5", rotation angle = 130 degrees
  Source counts = 12.4 +/- 3.9
  Background counts = 2.6
  Rate = 8e-05 +/- 2e-05

[Sun Jun  2 22:19:13 2013] Off-axis axis estimate = 4.45'
[Sun Jun  2 23:27:46 2013] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 23:27:46 2013] Initial guess for spatial extent in simple fitting = 0.98"
[Sun Jun  2 23:27:46 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.013
[Sun Jun  2 23:27:46 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 0.98"
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src47.ximg exists
[Mon Jun  3 00:34:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src47.csv
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src47_1.ximg exists
[Mon Jun  3 00:34:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src47.csv
[Mon Jun  3 00:34:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Mon Jun  3 00:34:56 2013] Fit fullrun_ccd1_acisf13768_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Mon Jun  3 02:36:58 2013] Source 54 is offset by -0.894919 and 4.810996 pixels which is larger than
2 X fitted extent = 0.991955 x 0.991955, not incorporating fit results
[Mon Jun  3 02:36:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 02:36:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 02:36:58 2013] Assessing source extent using major
[Mon Jun  3 02:36:58 2013] Source does appear to be extended
[Mon Jun  3 02:36:58 2013] Computing asymmetry using major and minor axis, asym = 1.65
[Mon Jun  3 02:36:58 2013] Source is asymmetric
[Mon Jun  3 03:35:31 2013] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 03:35:31 2013] Initial guess for spatial extent in simple fitting = 0.98"
[Mon Jun  3 03:35:31 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.013
[Mon Jun  3 03:35:31 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 0.98"
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src47.ximg exists
[Mon Jun  3 04:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src47.csv
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src47_1.ximg exists
[Mon Jun  3 04:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src47.csv
[Mon Jun  3 04:42:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_tfrozen_src47.ximg exists
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Jun  3 04:42:05 2013] Fit fullrun_ccd1_acisf13768_pi14-548_cl_pass1_tfrozen_src47 appears to have run properly
[Mon Jun  3 06:28:41 2013] Spatial fit model total counts = 23.765900, observed total counts = 28.000000
[Mon Jun  3 06:28:41 2013] Offset between fit and detection position for source 54 = 1.504176 pixels
[Mon Jun  3 06:28:41 2013] 21.932930 total counts/ 3.335430 bgd. counts: snr = 10.183068
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 1.504176 pixels
  Position = (155.5, 597.2) = 15 54 26.23 -55 9 52.0
  Extent = 1.4 (1.1-1.9)" x 0.5 (0.4-0.7)", rotation angle = 71 (65-85) degrees
  Source counts = 18.6 +/- 4.7
  Background counts = 3.3
  Rate = 0.0001 +/- 3e-05
[Mon Jun  3 06:28:41 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 06:28:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 06:28:41 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 06:28:41 2013] Source does appear to be extended
[Mon Jun  3 06:28:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.43
[Mon Jun  3 06:55:31 2013] Writing source region out to fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54_src.reg
[Mon Jun  3 06:55:31 2013] Extracting stamp from image fullrun_ccd1_acisf13768_pi14-548_cl_sm2.00.img.gz, (89, 531) - (222, 663)
[Mon Jun  3 06:55:31 2013] Writing fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54.gif
[Mon Jun  3 07:21:20 2013] Size of ../../acisf13768/products/events/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54_src.evt.gz[events] = 20 counts
[Mon Jun  3 07:21:20 2013] Mean chipx,y = (452.25, 913.70)
[Mon Jun  3 07:21:20 2013] Mean tdetx,y = (4218.30, 4559.25)
[Mon Jun  3 07:21:20 2013] chipx,y range = (429.00-467.00, 894.00-933.00)
[Mon Jun  3 07:21:20 2013] Size of ../../acisf13768/products/events/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54_bgd.evt.gz[events] = 224 counts
[Mon Jun  3 07:21:21 2013] Not generating rmf since there are only 18 counts
[Mon Jun  3 07:21:21 2013] arf not found, will run specextract
[Mon Jun  3 07:21:47 2013] ../../acisf13768/products/spectra/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54.warf not found
[Mon Jun  3 07:21:47 2013] ../../acisf13768/products/spectra/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54.wrmf not found
[Mon Jun  3 07:21:47 2013] Removal of ../../acisf13768/products/spectra/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54.soff failed
[Mon Jun  3 07:28:39 2013] Spectrum 54 has only 19 counts, deleting rmf
[Mon Jun  3 07:28:39 2013] 187.105
[Mon Jun  3 08:31:13 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:31:13 2013] Total counts from fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54_src.pi.gz = 20.00
[Mon Jun  3 08:31:13 2013] Total counts from fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54_bgd.pi.gz = 224.00
[Mon Jun  3 08:31:13 2013] Got source and background scale factors 0.000002, 0.000075
[Mon Jun  3 08:31:13 2013] User source parameters:
  Position = (155.5, 597.2) = 15 54 26.23 -55 9 52.0
  Extent = 1.4 (1.1-1.9)" x 0.5 (0.4-0.7)", rotation angle = 71 (65-85) degrees
  Source aperture counts = 12.8 +/- 5.6
  Background aperture counts = 7.2
  Rate = 8e-05 +/- 3e-05

[Mon Jun  3 08:31:15 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:31:15 2013] Using photon index=1.80, rate=0.000117, arf fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src54.arf
[Mon Jun  3 08:31:15 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 08:31:15 2013] Updating source flux to 2e-15
[Mon Jun  3 08:31:46 2013] Flag b found in src. 54 procflags, skipping spectral fitting
[Mon Jun  3 08:31:46 2013] Source 54 has fewer than 100.000000 counts, skipping spectral fitting