[Sun Jun  2 22:19:12 2013] Detection parameters:
  Position = (140.8, 731.5) = 15 54 27.05 -55 8 45.7
  Extent = 0.8" x 0.5", rotation angle = 108 degrees
  Source counts = 12.9 +/- 4.0
  Background counts = 3.1
  Rate = 8e-05 +/- 3e-05

[Sun Jun  2 22:19:13 2013] Off-axis axis estimate = 3.37'
[Sun Jun  2 23:27:46 2013] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 23:27:46 2013] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Jun  2 23:27:46 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.882
[Sun Jun  2 23:27:46 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 0.66"
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src46.ximg exists
[Mon Jun  3 00:34:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src46.csv
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src46_1.ximg exists
[Mon Jun  3 00:34:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src46.csv
[Mon Jun  3 00:34:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13768_pi14-548_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_tfrozen_src46.ximg exists
[Mon Jun  3 00:34:56 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass0_tfrozen_src46_1.ximg exists
[Mon Jun  3 00:34:56 2013] Fit fullrun_ccd1_acisf13768_pi14-548_cl_pass0_tfrozen_src46 appears to have run properly
[Mon Jun  3 02:36:58 2013] Spatial fit model total counts = 20.172000, observed total counts = 23.000000
[Mon Jun  3 02:36:58 2013] Offset between fit and detection position for source 18 = 1.047370 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.047370 pixels
  Position = (141.8, 731.5) = 15 54 27.02 -55 8 45.9
  Extent = 1.5 (1.5-1.5)" x 0.6 (0.4-0.9)", rotation angle = 60 (45-75) degrees
  Source counts = 18.4 +/- 4.3
  Background counts = 0.0
  Rate = 0.0001 +/- 3e-05
[Mon Jun  3 02:36:58 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 02:36:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 02:36:58 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 02:36:58 2013] Source does appear to be extended
[Mon Jun  3 02:36:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.68
[Mon Jun  3 02:36:58 2013] Source is asymmetric
[Mon Jun  3 03:35:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  3 03:35:31 2013] Initial guess for spatial extent in simple fitting = 1.04"
[Mon Jun  3 03:35:31 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Mon Jun  3 03:35:31 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 1.04"
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src46.ximg exists
[Mon Jun  3 04:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src46.csv
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src46_1.ximg exists
[Mon Jun  3 04:42:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src46.csv
[Mon Jun  3 04:42:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13768_pi14-548_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_tfrozen_src46.ximg exists
[Mon Jun  3 04:42:04 2013] fullrun_ccd1_acisf13768_pi14-548_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Jun  3 04:42:04 2013] Fit fullrun_ccd1_acisf13768_pi14-548_cl_pass1_tfrozen_src46 appears to have run properly
[Mon Jun  3 06:28:41 2013] Spatial fit model total counts = 17.723500, observed total counts = 21.000000
[Mon Jun  3 06:28:41 2013] Offset between fit and detection position for source 18 = 1.066002 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.066002 pixels
  Position = (141.3, 732.4) = 15 54 27.05 -55 8 45.5
  Extent = 1.1 (0.7-2.0)" x 0.5 (0.4-0.8)", rotation angle = 61 (38-89) degrees
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.0001 +/- 3e-05
[Mon Jun  3 06:28:41 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 06:28:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 06:28:41 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 06:28:41 2013] Source does appear to be extended
[Mon Jun  3 06:28:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90
[Mon Jun  3 06:55:31 2013] Writing source region out to fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18_src.reg
[Mon Jun  3 06:55:31 2013] Extracting stamp from image fullrun_ccd1_acisf13768_pi14-548_cl_sm2.00.img.gz, (92, 683) - (191, 782)
[Mon Jun  3 06:55:31 2013] Writing fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18.gif
[Mon Jun  3 07:20:43 2013] Size of ../../acisf13768/products/events/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18_src.evt.gz[events] = 16 counts
[Mon Jun  3 07:20:43 2013] Mean chipx,y = (308.88, 920.44)
[Mon Jun  3 07:20:43 2013] Mean tdetx,y = (4211.56, 4415.88)
[Mon Jun  3 07:20:43 2013] chipx,y range = (294.00-323.00, 904.00-938.00)
[Mon Jun  3 07:20:43 2013] Size of ../../acisf13768/products/events/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 117 counts
[Mon Jun  3 07:20:45 2013] Not generating rmf since there are only 16 counts
[Mon Jun  3 07:20:45 2013] arf not found, will run specextract
[Mon Jun  3 07:21:11 2013] ../../acisf13768/products/spectra/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18.warf not found
[Mon Jun  3 07:21:11 2013] ../../acisf13768/products/spectra/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18.wrmf not found
[Mon Jun  3 07:21:11 2013] Removal of ../../acisf13768/products/spectra/fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18.soff failed
[Mon Jun  3 07:28:39 2013] Spectrum 18 has only 16 counts, deleting rmf
[Mon Jun  3 07:28:39 2013] 184.772
[Mon Jun  3 08:31:13 2013] Updating aperture counts using extracted products
[Mon Jun  3 08:31:13 2013] Total counts from fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18_src.pi.gz = 16.00
[Mon Jun  3 08:31:13 2013] Total counts from fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18_bgd.pi.gz = 117.00
[Mon Jun  3 08:31:13 2013] Got source and background scale factors 0.000002, 0.000043
[Mon Jun  3 08:31:13 2013] User source parameters:
  Position = (141.3, 732.4) = 15 54 27.05 -55 8 45.5
  Extent = 1.1 (0.7-2.0)" x 0.5 (0.4-0.8)", rotation angle = 61 (38-89) degrees
  Source aperture counts = 11.0 +/- 5.1
  Background aperture counts = 5.0
  Rate = 7e-05 +/- 3e-05

[Mon Jun  3 08:31:15 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 08:31:15 2013] Using photon index=1.80, rate=0.000102, arf fullrun_ccd1_acisf13768_pi14-548_pass1_cl_src18.arf
[Mon Jun  3 08:31:15 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jun  3 08:31:15 2013] Updating source flux to 1.8e-15
[Mon Jun  3 08:31:46 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting