[Wed Jul  3 13:09:37 2013] Detection parameters:
  Position = (683.5, 274.7) = 15 54 59.51 -55 4 32.0
  Extent = 0.6" x 0.5", rotation angle = 11 degrees
  Source counts = 12.6 +/- 3.9
  Background counts = 2.4
  Rate = 9e-05 +/- 3e-05

[Wed Jul  3 13:09:38 2013] Off-axis axis estimate = 3.75'
[Wed Jul  3 15:17:01 2013] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Wed Jul  3 15:17:01 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Wed Jul  3 15:17:01 2013] source mask rpix=1.5, npix_max = 16, mask sum = 15, frac = 0.899
[Wed Jul  3 15:17:01 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 0.76"
[Wed Jul  3 16:23:45 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass0_src51.ximg exists
[Wed Jul  3 16:23:45 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass0_src51_1.ximg exists
[Wed Jul  3 16:23:45 2013] Fit fullrun_ccd2_acisf13767_pi14-548_cl_pass0_src51 appears to have run properly
[Wed Jul  3 16:23:46 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Wed Jul  3 16:23:46 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Jul  3 16:23:46 2013] Fit fullrun_ccd2_acisf13767_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Wed Jul  3 17:33:39 2013] Spatial fit model total counts = 26.090000, observed total counts = 27.000000
[Wed Jul  3 17:33:39 2013] Offset between fit and detection position for source 45 = 0.629267 pixels
[Wed Jul  3 17:33:39 2013] 25.092100 total counts/ 10.232300 bgd. counts: snr = 4.645434
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.629267 pixels
  Position = (684.1, 275.0) = 15 54 59.51 -55 4 32.1
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.9 +/- 5.0
  Background counts = 10.2
  Rate = 0.0001 +/- 4e-05
[Wed Jul  3 17:33:39 2013] Vigneting correction estimate = 1.000000
[Wed Jul  3 17:33:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  3 17:33:39 2013] Assessing source extent using major axis lower bound
[Wed Jul  3 17:33:39 2013] Source does appear to be extended
[Wed Jul  3 17:33:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  3 19:22:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  3 19:22:20 2013] Initial guess for spatial extent in simple fitting = 0.69"
[Wed Jul  3 19:22:20 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.827
[Wed Jul  3 19:22:20 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 0.69"
[Wed Jul  3 20:28:54 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass1_src50.ximg exists
[Wed Jul  3 20:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13767_pi14-548_cl_pass1_src50.csv
[Wed Jul  3 20:28:54 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass1_src50_1.ximg exists
[Wed Jul  3 20:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13767_pi14-548_cl_pass1_src50.csv
[Wed Jul  3 20:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13767_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13767_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  3 20:28:55 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Wed Jul  3 20:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13767_pi14-548_cl_pass1_tfrozen_src50.csv
[Wed Jul  3 20:28:55 2013] fullrun_ccd2_acisf13767_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Jul  3 20:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13767_pi14-548_cl_pass1_tfrozen_src50.csv
[Wed Jul  3 20:28:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13767_pi14-548_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13767_pi14-548_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  3 21:26:17 2013] Spatial fit model total counts = 19.957800, observed total counts = 25.000000
[Wed Jul  3 21:26:17 2013] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul  3 21:26:17 2013] Vigneting correction estimate = 1.000000
[Wed Jul  3 21:26:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  3 21:26:17 2013] Assessing source extent using major axis lower bound
[Wed Jul  3 21:26:17 2013] Source does appear to be extended
[Wed Jul  3 21:26:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  3 22:18:01 2013] Writing source region out to fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45_src.reg
[Wed Jul  3 22:18:01 2013] Extracting stamp from image fullrun_ccd2_acisf13767_pi14-548_cl_sm2.00.img.gz, (652, 243) - (716, 307)
[Wed Jul  3 22:18:01 2013] Writing fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45.gif
[Wed Jul  3 22:46:48 2013] Size of ../../acisf13767/products/events/fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45_src.evt.gz[events] = 20 counts
[Wed Jul  3 22:46:48 2013] Mean chipx,y = (218.95, 627.30)
[Wed Jul  3 22:46:48 2013] Mean tdetx,y = (3688.30, 3867.05)
[Wed Jul  3 22:46:48 2013] chipx,y range = (205.00-237.00, 610.00-646.00)
[Wed Jul  3 22:46:48 2013] Size of ../../acisf13767/products/events/fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45_bgd.evt.gz[events] = 47 counts
[Wed Jul  3 22:46:49 2013] Not generating rmf since there are only 14 counts
[Wed Jul  3 22:46:49 2013] arf not found, will run specextract
[Wed Jul  3 22:47:15 2013] ../../acisf13767/products/spectra/fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45.warf not found
[Wed Jul  3 22:47:15 2013] ../../acisf13767/products/spectra/fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45.wrmf not found
[Wed Jul  3 22:47:15 2013] Removal of ../../acisf13767/products/spectra/fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45.soff failed
[Wed Jul  3 22:52:53 2013] Spectrum 45 has only 15 counts, deleting rmf
[Wed Jul  3 22:52:53 2013] 186.046
[Wed Jul  3 23:25:43 2013] Updating aperture counts using extracted products
[Wed Jul  3 23:25:43 2013] Total counts from fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45_src.pi.gz = 20.00
[Wed Jul  3 23:25:43 2013] Total counts from fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45_bgd.pi.gz = 47.00
[Wed Jul  3 23:25:43 2013] Got source and background scale factors 0.000001, 0.000017
[Wed Jul  3 23:25:43 2013] User source parameters:
  Position = (684.1, 275.0) = 15 54 59.51 -55 4 32.1
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source aperture counts = 16.0 +/- 5.6
  Background aperture counts = 4.0
  Rate = 0.0001 +/- 4e-05

[Wed Jul  3 23:25:45 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul  3 23:25:45 2013] Using photon index=1.80, rate=0.000105, arf fullrun_ccd2_acisf13767_pi14-548_pass1_cl_src45.arf
[Wed Jul  3 23:25:45 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jul  3 23:25:45 2013] Updating source flux to 1.8e-15
[Wed Jul  3 23:26:34 2013] Flag p found in src. 45 procflags, skipping spectral fitting
[Wed Jul  3 23:26:34 2013] Source 45 has fewer than 100.000000 counts, skipping spectral fitting