[Wed Jul  3 13:09:13 2013] Detection parameters:
  Position = (945.5, 1081.7) = 15 53 40.93 -55 5 49.2
  Extent = 0.5" x 0.5", rotation angle = 42 degrees
  Source counts = 18.7 +/- 4.9
  Background counts = 5.3
  Rate = 0.0001 +/- 3e-05

[Wed Jul  3 13:09:13 2013] Off-axis axis estimate = 7.64'
[Wed Jul  3 14:07:03 2013] Using EEF radius (= 2.58 ")to estimate initial spatial extent for simple fitting
[Wed Jul  3 14:07:03 2013] Initial guess for spatial extent in simple fitting = 2.58"
[Wed Jul  3 14:07:03 2013] source mask rpix=5.2, npix_max = 132, mask sum = 110, frac = 0.833
[Wed Jul  3 14:07:03 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 2.58"
[Wed Jul  3 15:17:00 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass0_src33.ximg exists
[Wed Jul  3 15:17:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13767_pi14-548_cl_pass0_src33.csv
[Wed Jul  3 15:17:00 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass0_src33_1.ximg exists
[Wed Jul  3 15:17:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13767_pi14-548_cl_pass0_src33.csv
[Wed Jul  3 15:17:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13767_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13767_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  3 15:17:01 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Wed Jul  3 15:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13767_pi14-548_cl_pass0_tfrozen_src33.csv
[Wed Jul  3 15:17:01 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jul  3 15:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13767_pi14-548_cl_pass0_tfrozen_src33.csv
[Wed Jul  3 15:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13767_pi14-548_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13767_pi14-548_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  3 17:33:32 2013] Warning, spatial fit 33 centroid is now closest to src. 48
[Wed Jul  3 17:33:32 2013] Vigneting correction estimate = 1.000000
[Wed Jul  3 17:33:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  3 17:33:32 2013] Assessing source extent using major
[Wed Jul  3 17:33:32 2013] Source does appear to be extended
[Wed Jul  3 17:33:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  3 18:19:00 2013] Using EEF radius (= 2.58 ")to estimate initial spatial extent for simple fitting
[Wed Jul  3 18:19:00 2013] Initial guess for spatial extent in simple fitting = 2.58"
[Wed Jul  3 18:19:00 2013] source mask rpix=5.2, npix_max = 132, mask sum = 110, frac = 0.833
[Wed Jul  3 18:19:00 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 2.58"
[Wed Jul  3 19:22:20 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass1_src33.ximg exists
[Wed Jul  3 19:22:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13767_pi14-548_cl_pass1_src33.csv
[Wed Jul  3 19:22:20 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass1_src33_1.ximg exists
[Wed Jul  3 19:22:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13767_pi14-548_cl_pass1_src33.csv
[Wed Jul  3 19:22:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13767_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13767_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  3 19:22:20 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Wed Jul  3 19:22:20 2013] fullrun_ccd1_acisf13767_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Jul  3 19:22:20 2013] Fit fullrun_ccd1_acisf13767_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Jul  3 21:26:09 2013] Spatial fit model total counts = 76.093700, observed total counts = 72.000000
[Wed Jul  3 21:26:09 2013] Offset between fit and detection position for source 47 = 1.368650 pixels
[Wed Jul  3 21:26:09 2013] 76.011200 total counts/ 45.125100 bgd. counts: snr = 4.597841
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 1.368650 pixels
  Position = (945.8, 1083.1) = 15 53 40.94 -55 5 48.8
  Extent = 1.4 (0.6-2.0)", rotation angle = 0
  Source counts = 30.9 +/- 8.7
  Background counts = 45.1
  Rate = 0.0002 +/- 6e-05
[Wed Jul  3 21:26:09 2013] Vigneting correction estimate = 1.000000
[Wed Jul  3 21:26:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  3 21:26:09 2013] Assessing source extent using major axis lower bound
[Wed Jul  3 21:26:09 2013] Source does appear to be extended
[Wed Jul  3 21:26:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  3 21:26:09 2013] Source is confused with source 48
[Wed Jul  3 21:47:08 2013] Writing source region out to fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47_src.reg
[Wed Jul  3 21:47:08 2013] Extracting stamp from image fullrun_ccd1_acisf13767_pi14-548_cl_sm2.00.img.gz, (884, 1021) - (1008, 1107)
[Wed Jul  3 21:47:08 2013] Writing fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47.gif
[Wed Jul  3 22:04:37 2013] Size of ../../acisf13767/products/events/fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47_src.evt.gz[events] = 52 counts
[Wed Jul  3 22:04:37 2013] Mean chipx,y = (17.02, 86.73)
[Wed Jul  3 22:04:37 2013] Mean tdetx,y = (5045.27, 4124.02)
[Wed Jul  3 22:04:37 2013] chipx,y range = (2.00-35.00, 65.00-108.00)
[Wed Jul  3 22:04:37 2013] Size of ../../acisf13767/products/events/fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47_bgd.evt.gz[events] = 115 counts
[Wed Jul  3 22:04:38 2013] Not generating rmf since there are only 30 counts
[Wed Jul  3 22:04:38 2013] arf not found, will run specextract
[Wed Jul  3 22:04:49 2013] ../../acisf13767/products/spectra/fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47.warf not found
[Wed Jul  3 22:04:49 2013] ../../acisf13767/products/spectra/fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47.wrmf not found
[Wed Jul  3 22:04:49 2013] Removal of ../../acisf13767/products/spectra/fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47.soff failed
[Wed Jul  3 22:18:00 2013] Spectrum 47 has only 31 counts, deleting rmf
[Wed Jul  3 22:18:00 2013] 117.254
[Wed Jul  3 23:25:32 2013] Updating aperture counts using extracted products
[Wed Jul  3 23:25:32 2013] Total counts from fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47_src.pi.gz = 52.00
[Wed Jul  3 23:25:33 2013] Total counts from fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47_bgd.pi.gz = 115.00
[Wed Jul  3 23:25:33 2013] Got source and background scale factors 0.000006, 0.000067
[Wed Jul  3 23:25:33 2013] User source parameters:
  Position = (945.8, 1083.1) = 15 53 40.94 -55 5 48.8
  Extent = 1.4 (0.6-2.0)", rotation angle = 0
  Source aperture counts = 42.3 +/- 8.3
  Background aperture counts = 9.7
  Rate = 0.0003 +/- 6e-05

[Wed Jul  3 23:25:36 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul  3 23:25:36 2013] Using photon index=1.80, rate=0.000218, arf fullrun_ccd1_acisf13767_pi14-548_pass1_cl_src47.arf
[Wed Jul  3 23:25:36 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jul  3 23:25:36 2013] Updating source flux to 5.9e-15
[Wed Jul  3 23:26:16 2013] Flag c found in src. 47 procflags, skipping spectral fitting
[Wed Jul  3 23:26:16 2013] Source 47 has fewer than 100.000000 counts, skipping spectral fitting