[Fri May 24 11:39:51 2013] Detection parameters:
  Position = (704.6, 614.6) = 10 43 57.73 11 42 7.5
  Extent = 1.0" x 0.5", rotation angle = 111 degrees
  Source counts = 24.7 +/- 5.2
  Background counts = 2.3
  Rate = 0.003 +/- 0.0005

[Fri May 24 11:39:51 2013] Off-axis axis estimate = 2.16'
[Fri May 24 11:55:42 2013] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri May 24 11:55:42 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Fri May 24 11:55:42 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.133
[Fri May 24 11:55:42 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.45"
[Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src4.ximg exists
[Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src4_1.ximg exists
[Fri May 24 12:04:04 2013] Fit fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src4 appears to have run properly
[Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 24 12:04:04 2013] Fit fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri May 24 12:04:07 2013] Spatial fit model total counts = 62.382900, observed total counts = 63.000000
[Fri May 24 12:04:07 2013] Offset between fit and detection position for source 3 = 2.893836 pixels
[Fri May 24 12:04:07 2013] 61.942500 total counts/ 20.931500 bgd. counts: snr = 8.963966
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.893836 pixels
  Position = (707.4, 615.4) = 10 43 57.66 11 42 7.7
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source counts = 41.0 +/- 7.9
  Background counts = 20.9
  Rate = 0.004 +/- 0.0008
[Fri May 24 12:04:07 2013] Vigneting correction estimate = 1.000000
[Fri May 24 12:04:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 12:04:07 2013] Assessing source extent using major axis lower bound
[Fri May 24 12:04:07 2013] Source does appear to be extended
[Fri May 24 12:04:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 12:19:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 12:19:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 12:19:50 2013] Initial guess for spatial extent in simple fitting = 1.12"
[Fri May 24 12:19:50 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.813
[Fri May 24 12:19:50 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 1.12"
[Fri May 24 12:28:41 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src4.ximg exists
[Fri May 24 12:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src4.csv
[Fri May 24 12:28:41 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src4_1.ximg exists
[Fri May 24 12:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src4.csv
[Fri May 24 12:28:41 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 12:28:42 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri May 24 12:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri May 24 12:28:42 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 24 12:28:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri May 24 12:28:42 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 12:28:45 2013] Spatial fit model total counts = 49.615200, observed total counts = 65.000000
[Fri May 24 12:28:45 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 12:28:45 2013] Vigneting correction estimate = 1.000000
[Fri May 24 12:28:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 12:28:45 2013] Assessing source extent using major axis lower bound
[Fri May 24 12:28:45 2013] Source does appear to be extended
[Fri May 24 12:28:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 12:35:19 2013] Writing source region out to fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3_src.reg
[Fri May 24 12:35:19 2013] Extracting stamp from image fullrun_ccd7_acisf13765_pi14-548_cl_sm2.00.img.gz, (656, 564) - (759, 667)
[Fri May 24 12:35:19 2013] Writing fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3.gif
[Fri May 24 12:36:10 2013] Size of ../../acisf13765/products/events/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3_src.evt.gz[events] = 66 counts
[Fri May 24 12:36:10 2013] Mean chipx,y = (451.65, 508.94)
[Fri May 24 12:36:10 2013] Mean tdetx,y = (4368.65, 2210.94)
[Fri May 24 12:36:10 2013] chipx,y range = (431.00-474.00, 490.00-534.00)
[Fri May 24 12:36:10 2013] Size of ../../acisf13765/products/events/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 174 counts
[Fri May 24 12:36:11 2013] Not generating rmf since there are only 41 counts
[Fri May 24 12:36:11 2013] arf not found, will run specextract
[Fri May 24 12:36:19 2013] ../../acisf13765/products/spectra/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3.warf not found
[Fri May 24 12:36:19 2013] ../../acisf13765/products/spectra/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3.wrmf not found
[Fri May 24 12:36:19 2013] Removal of ../../acisf13765/products/spectra/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3.soff failed
[Fri May 24 12:39:04 2013] Spectrum 3 has only 41 counts, deleting rmf
[Fri May 24 12:39:04 2013] 230.015
[Fri May 24 12:39:07 2013] Updating aperture counts using extracted products
[Fri May 24 12:39:07 2013] Total counts from fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3_src.pi.gz = 66.00
[Fri May 24 12:39:07 2013] Total counts from fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3_bgd.pi.gz = 174.00
[Fri May 24 12:39:07 2013] Got source and background scale factors 0.000004, 0.000045
[Fri May 24 12:39:07 2013] User source parameters:
  Position = (707.4, 615.4) = 10 43 57.66 11 42 7.7
  Extent = 1.1 (0.8-1.4)", rotation angle = 0
  Source aperture counts = 51.2 +/- 9.2
  Background aperture counts = 14.8
  Rate = 0.005 +/- 0.0009

[Fri May 24 12:39:08 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 12:39:08 2013] Using photon index=1.80, rate=0.00417, arf fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3.arf
[Fri May 24 12:39:08 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 24 12:39:08 2013] Updating source flux to 3.2e-14
[Fri May 24 12:39:14 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri May 24 12:39:14 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 24 12:39:15 2013] acisf13765/analysis//spectral/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete